We replaced a cracked boxed eaves to a house. This shows how it is done to help handymen and homeowners do it yourself. we replace the existing sheet with a hardiflex 4.5 mm sheet.
Great instructional video. Best I’ve found so far for replacing the eaves on YT. Just wondering if it’s easier to start with putting the sheet into the outside groove first then against the brick wall?
@dennisperrie
Жыл бұрын
The easiest is to start with the wall. It allows the sheet to slide
@denniswalker9219
Жыл бұрын
Much better with sound and your explanation, didn't see you replace the damaged downpipe drain in the video?
@dennisperrie
Жыл бұрын
I have a separate video for that. Otherwise, the video becomes too long. Check out how to install a downpipe.
@jimowenspmp
Ай бұрын
Excellent job. I have to fix mine, and my roof seems identical to that one. My problem is I need 85 cm wide board, but the widest available seems to be 75 cm
@dennisperrie
Ай бұрын
@@jimowenspmp you should be able to get 90 and 120 wide boards.
@jimowenspmp
Ай бұрын
@@dennisperrie I haven't found wider than 75 cm in Perth. I can get Villaboard wider, but it's thicker (6 mm)
@jimowenspmp
Ай бұрын
@@dennisperrie It looks like Hardiflex cladding might be the answer
@HamzaKhan-be7jt
Ай бұрын
Thanks
@jositt65
19 күн бұрын
awesome need mine done to many holes from electricians stuff up put sensor lights on and hole easy go thru a most dont use plastic sleeves just screw in hope will stop now got a sparkie coming out again a new one put on me timber fascia
@benjaminroberts1221
2 ай бұрын
Brilliant, cheers
@ML6103
Ай бұрын
G'day Dennis. Do you have a video on sloped eaves? In particular I'm trying to work out how I would install colorbond fascia and rebate the soffit sheets into the groove at the bottom if the sheets were running along the rafters at an angle, and weren't horizontal like in this video. Sorry for the long winded question.
@dennisperrie
Ай бұрын
@ML6103 it all about the set up. you have to get the rebate set right. If you are not sure a roof carpenter will know the set up
@ML6103
Ай бұрын
@@dennisperrie but are there colorbond fascias with an angled rebate for the soffit sheets? So far, all I can find is the rebate facing 90 degrees to accommodate the sheet as normal at horizontal. I can find timber fascias with the angled slot, but not colorbond. I guess I'm just wondering if they are around.
@dennisperrie
Ай бұрын
Generally it is done with wood but if you talk to the facia manufacturer they may have some ideas or solutions.
@ML6103
Ай бұрын
@@dennisperrie okay thanks mate
@sonuvirk4920
5 ай бұрын
Job is awesome,,
@alexouretski115
10 ай бұрын
How old was that house? Would the eaves not contain asbestos? also, whoever wired that place went a little overboard with romax 😅😅😅
@dennisperrie
10 ай бұрын
Not overly old as the eave was broken due to water. Definately not asbestoes. Also it was by the meter box so that is why all the wires
@alexouretski115
10 ай бұрын
@@dennisperrie cool bananas. Still so much Romax wire is a sure sign of a “quality” electrician 😀😀😀
@quatermass8
Жыл бұрын
Looks like a tricky operation all around. That eave sheet is brittle by the looks of it. I can see why small taps are used instead of mega force!
@petersphotojourney
4 ай бұрын
Great Vid! That is poor poor electrical work above that switch board.
@franadrian
Жыл бұрын
great video thanks. Can I ask, how much would you charge for a job like this one?
@dennisperrie
Жыл бұрын
About 500
@dungdigdog8650
Жыл бұрын
@@dennisperriewhere do you live, can you do this for me?
Пікірлер: 30