Here is the door disassembly video for anyone that dropped their bolt inside the door. kzitem.info/news/bejne/mayBmGqrkWKIeH4
@evadnamorrissey7340
3 жыл бұрын
I'm a 67 year old female & changed mine after watching your video. Took me 10 minutes & I used a index card to keep the bolt from dropping. Worked like a charm. Thank You😊
@MTTech
2 жыл бұрын
I'm glad you found my video helpful. Have a wonderful holiday.
@spike852
5 жыл бұрын
Great demo. Thanks! I found a better, surefire way to make sure you don't lose that bolt when removing or replacing it: hold an index card or some other piece of paper inside the hole. That way if you drop the bolt, it will slide down the card and land on the ground outside the door. No extra tools necessary.
@billbarndt741
5 жыл бұрын
Dealer wanted almost $400. $12 for the part, your video, and 15 minutes and it’s fixed! Thank you!
@MTTech
5 жыл бұрын
Glad I could help, and save you money!
@clintonshort2602
7 жыл бұрын
Hello MTTech. I just used your walkthrough to change both back door handles on my 09 Hyundai Sonata. Wanted to thank you for the help and also mention that when removing the 8mm bolt (At least in the back doors since they don't have manual key locks) you only need to loosen it half way to replace the handles. Once it is loose enough to remove the outer shell, you can install the handles with ease and not have to worry about the 8mm bolt falling to the ground. Just thought that might help you in your future handle replacements! Thanks for the informative video!!!!
@MTTech
7 жыл бұрын
Clinton Short Glad to help! Thanks for the tip! This should help other people watching this video.
@marksprague582
7 жыл бұрын
Thank you Clinton, I have to replace door handle rear drivers passenger side for comment on not removing bolt completely! Now I have to find paint. Not sure where I go to find that MT Tech said I could get base and gloss instead from dealer. Any ideals?
@gergemall
6 жыл бұрын
Thx all
@513dana
6 жыл бұрын
What is the name of the tool to remove the bolt? (Not the magnetic pickup tool...) I successfully replaced the front door handle using a neighbor's tool but need a longer version of that same tool to replace the handle in the back
@MTTech
6 жыл бұрын
Dana Lutt Socket wrench with an extension.
@jaimefalvarez
7 жыл бұрын
DUDE! thank you so much for showing me this. Saved me the hassle of removing the inner door panel as I originally plnaned.
@MTTech
7 жыл бұрын
Fernando Alvarez Hey, glad I could help. Taking off the inner door panel is a pain in the butt I tell ya. Glad this car doesn't require the panel to be removed, unless you drop the bolt inside. Don't drop the bolt! I warned ya. Good luck!
@willhiggins8763
7 жыл бұрын
Fernando Alvarez I was thinking the same thing.one of the reasons I was putting it off
@barcodenut
8 жыл бұрын
Thanks. Dealer wanted to "diagnose it" first ($110 first hour of labor). Ordered chrome one on Amazon for $14 and painted the insert to match my other handles. Your video made it a snap. (I added a curved cutout from a water bottle just in case to catch the screw if the magnet dropped it.) YOU saved me a hundreds of dollars!
@MTTech
8 жыл бұрын
I know! Such an insane amount of money to pay for such a simple task. Glad I could help!
@tigerrx7
4 жыл бұрын
Brent C duuuuudde!!! Game changer with the curved cutout water bottle. Idea of the month award for you. I definitely benefitted! Cheers!
@sonnyburnett8725
3 жыл бұрын
So far my son’s 2010 Sonata has broken 3 door handles. That handle is very weak, but thanks to people like you I can replace them with a nice new handle fully painted. Thank you so much!
@MTTech
3 жыл бұрын
Great to hear!
@mrkawasakilakota
8 жыл бұрын
I am a mom of two mechanic boys in my family and they said I wouldn't be able to fix my door handle on my sonata. Well I did it. Great video! Thank you.
@MTTech
7 жыл бұрын
You're welcome. I'm glad that you found the video helpful and that you were able to fix the door handle on your car yourself.
@arcford211
7 жыл бұрын
You are a time saver man!! Great video, I was getting ready to head home from the grocery store when I noticed my door handle sticking out. Don't know if someone tried getting into my car cause the alarm wasn't going off or if this is just a common problem with this hyundai door handle, but this video is really going to save me a ton of time. Wasn't sure if I would have had to take the whole interior panel of the door off or not, but this is such an easy fix!! Thanks brother!!
@MTTech
7 жыл бұрын
No prob.
@freemandecie-scott2315
7 жыл бұрын
You just saved me the hassle of ripping off my sister in laws door panel! Thank you for posting this!
@MTTech
7 жыл бұрын
Hey, you're welcome.
@joeburgess8774
7 жыл бұрын
This couldn't have been any easier thanks to this video. Took right around 5 minutes to fix my handle. And definitely get that magnetic tool!
@MTTech
7 жыл бұрын
Glad you were able fix it yourself!
@reneefields1925
6 ай бұрын
Thank you so much for this video. My door handle broke off in the big ice storm we had last week in Oregon. I was able to repair myself with your perfect instruction. Blessings!!
@brucekalter4206
6 жыл бұрын
Today is the SECOND time I've used this video... both rear Sonata door handles broke. This video is great, & was a great help. THANK YOU! Thanks also for the quick tip re: the rear doors in the comments... worked well too!
@MTTech
6 жыл бұрын
Yay!
@ddfalck
6 жыл бұрын
I haven't replaced my door handle yet, but I can't wait to comment on your video. Your instructions are clear and helpful, and I'm confident I can do this myself. My mechanic wanted $300.00 to replace a door handle and a gas strut under the hood. Time for a new mechanic!
@MTTech
6 жыл бұрын
Dave Falck Thanks for watching! Good luck on your repair!
@tomwhalen7813
8 жыл бұрын
Video is spot on, replaced two handles in 20 minutes! Thanks for the advice!
@MTTech
8 жыл бұрын
+Tom Whalen Good to hear! Glad I was able to help you out!
@khaul
8 ай бұрын
Wow I did not know it was this easy. It’s the same set up on a 2006-09 Hyundai Azera, my handles have a chrome strip in the middle so painting took a bit longer, very sweet
@michaelgallagher4789
Жыл бұрын
Thank you for the video, it took me 5 minutes to replace, used a toilet paper cardboard cylinder to protect against dropping the bolt, worked like a charm. Purchased set of 4 on eBay for $20, assume will need to replace them all. And the black color replacement is very close to dark blue color of car so no paint needed. Thanks!!!
@corinnecolwell6646
4 жыл бұрын
I just had the same experience. Shop wants to charge me $300 for this. The auto repair industry needs to be regulated! Such BS. Thanks for the video.
@karenwolf4808
6 жыл бұрын
Thank you so much. Replaced my daughters 2007 Sonata's door handle on my lunch break! Some nice person ripped it off in her college parking lot. Only cost 10.00 got the part from amazon . Used touch up paint. Not the best paint job but matches better then black. Shes back in action!
@MTTech
6 жыл бұрын
You're welcome. Glad you were able to fix it yourself and save some $$$.
@malibuzzz
8 жыл бұрын
My Door handle just broke a few hours ago and went on youtube to look at a few videos. Honestly, this is the best video, you even showed me the part number to order which i did as i paused your video and ordered on amazon. Finished watching and wanted to say thanks. I am just waiting for the part in the mail and will replay as a reminder. Again, thanks a lot. Saved me few hundred bucks for sure. Cheers!
@MTTech
8 жыл бұрын
Glad I could help! Looking forward to how your repair goes. Good luck! **remember to be very careful removing the small bolt/screw and not dropping it inside the door.
@malibuzzz
8 жыл бұрын
+MTTech It will be a few weeks before i get the handle. I bought a magnetic pickup tool similar to the one you have in your video. Many thanks, believe it will go smooth thanks to you!
@MTTech
8 жыл бұрын
Malibu Perfect! You should be set to go then. Let me know how it went!
@malibuzzz
8 жыл бұрын
+MTTech I was able to put the new door handle on with no problems thanks to you! Thanks for uploading your video. Again, the best one I seen.
@MTTech
8 жыл бұрын
+Malibu That's great to hear! Have a great day!
@johnslantos5437
4 жыл бұрын
Great walkthrough to replace the door handle and awesome trick to prevent from having the screw getting lost. Thank you very much for the video.
@MTTech
4 жыл бұрын
You're welcome.
@patfalasco5360
2 жыл бұрын
Great video, very helpful, changed 2 handles myself in about 15 minutes. I used a MAGNETIC 8mm nut-driver. No fear of losing the bolt. Thanks for your help!
@MTTech
2 жыл бұрын
Glad my video helped you out.
@tigerrx7
4 жыл бұрын
Many thanks to you man!!! I did this job in literally 5 minutes. I was so proud of myself lol. Avoided the $150+ the car shop was gonna charge. Car shop: “yeah we’ll have to take the entire door panel off and that.” Jokers.
@MTTech
4 жыл бұрын
Good job! Saved some money and felt proud of it showing them how it's done! Glad I could help!
@mikekowalskijr9854
5 жыл бұрын
I would have never figured out how the Kia Spectra 2006 handle gets attached to the reinforcement plate I kept trying to get the handle on by clipping in the long end and that was my mistake. NOW I GOT IT in the RIGHT WAY... THANK you for being the only one video out of about 20 I watched, showing the right way to install exterior handle.. KIA SPECTRA has a similar handle design and it is the same way to install as shown in the video!! THANK YOU SO MUCH!!!!
@MTTech
5 жыл бұрын
Glad my video was able to help you!
@flc2009
3 жыл бұрын
I replaced the drivers door handle in 2-4 minutes. Thanks I saved $100 in labor. Suggest people buy a magnetic device to retrieve the 8m bolt.
@charleskahl1586
8 жыл бұрын
Excellent video! Thanks for taking the time to produce it. You saved me a lot of money as I was able to locate the touch-up paint in a 12 oz. can to finish this project as well as paint a replacement driver's side mirror. The body shop wanted $350 to do the work. All parts and paint cost me less than $100 and it was very satisfying to repair my own vehicle.
@MTTech
8 жыл бұрын
Thank you for your comment! I am glad that I was able to help you with your repair.
@robertmara2060
4 жыл бұрын
Fantastic! Just finished replacing my driver's side handle on my 2009 Sonata. Thanks so much!
@MTTech
4 жыл бұрын
Glad I could help.
@tombyrne6433
2 жыл бұрын
Perfect instructions, I dedided to do to Home Depot and bought an extended magnetic wand. The tip was a little larger than your version. So got it loose , then used the magnetic tip to unscrew rest of the way while slightly pulling . Came right out! Uses the reverse to put it back in. Thanks for the video. (2006 Black Sonata, so perfect color on replacement) I also replaced the interior handle last year same door.
@MTTech
2 жыл бұрын
Glad to help.
@jamesarthur7118
2 жыл бұрын
I just fixed my door handle after watching this video. Thanks. I would like to add that I needed a T30 Torx bit to remove the screw that holds the locking cylinder.
@inspectahduff8980
8 жыл бұрын
I changed mine today and it was easy. I ordered the replacement handle on Friday and it came today.
@MTTech
8 жыл бұрын
+Demetrick McDuffie that's great!
@dAuNkNoWn360
5 жыл бұрын
I did end up removing the door pannel and couldn't find out how to install it so I searched it and found this video. Thanks for the help!
@MTTech
5 жыл бұрын
You're welcome!
@matthewlebrato6392
3 жыл бұрын
Awesome! Thank you. Much quicker and cheaper than taking it to the shop.
@MTTech
3 жыл бұрын
Glad my video was helpful.
@tweetycatt8030
7 жыл бұрын
your video actually gave me an idea of how to replace Sonata 2011 actuator and I did it!!! I couldn't remove the inner panel after the door panel removed. Thanks so much!!
@MTTech
7 жыл бұрын
Ah yes, I scratched my head the first time I took the door panel off this car in the video to figure out why the window wouldn't go down when pressing the button on the inside, I couldn't figure out how to remove the window regulator even with all the bolts removed. I just removed the window motor, turned the regulator by hand tested the motor, and put it all back together and surprisingly it worked for awhile, but you could tell the motor was struggling to move the regulator. Then came the day where I took off this door handle and dropped the stupid bolt inside the door. I wanted to retrieve this bolt, and found out the hard way that the tiny little bolt was preventing me from removing the window regulator the first time around. Well, I'm glad you found my video helpful in helping you solve your issue. The lock actuator on my 07 Azera doesn't work, and its on my list of things to fix.
@martinberger1000
6 жыл бұрын
Very helpful video. Suggestion: Put a small piece of masking tape over the screw head. That will make the screw a tight fit in an 8mm socket, so it will hold the screw in the socket as you remove it and put it back in place. No need for the magnetic pickup. Hyundai part is available on Amazon for $11.
@MTTech
6 жыл бұрын
Good tip! Hope it helps others who watch this video!
@ArtzFenix
7 жыл бұрын
This is a fairly easy job if you take your time. I guess I got lucky because I put a strong magnet inside my socket but the screw stayed in the white plastic like it was captive. I then carefully removed back piece, slid in the new $11 handle (my part came glossy black so no need to paint), carefully put back piece back on with socket over bolt and tightened. Took maybe 15 minutes once I dug out the right tools. Oh yeah, my handle replacement was on a rear door and the dust cap is facing inside the car but it looks exactly like the one on the front door. If you don't want to scratch the paint use a plastic pry tool, Harbor Freight and other places have them cheap. Good luck and thanks MTTech.
@MTTech
7 жыл бұрын
Thanks for the tip. Glad I could help.
@vibrantone220
6 жыл бұрын
Thanks for this video, I replaced a couple of handles on my husband's car. You saved us time and money!
@MTTech
6 жыл бұрын
Glad I could help!
@monkwerks
7 жыл бұрын
Thanks for the links for the part and the paint. I couldn't believe the paint costs more than the part!
@MTTech
7 жыл бұрын
Haha, yeah. Parts online will be cheaper than buying at the dealership aka "stealership".
@inspectahduff8980
8 жыл бұрын
My handle just broke today on my 2008 Sonata now I will have to order one to repair. This video will help me out a lot.
@MTTech
8 жыл бұрын
I have 4 words for you. "Don't drop the bolt" can't stress that enough. haha. Good luck fixing your door handle! Post an update once your're done.
@JUANRODRIGUEZ-ue7cc
7 жыл бұрын
MTTech good advice.
@samueln300
5 жыл бұрын
Thanks, was able to do this in 5 minutes. Mainly because the old handle came of completely, so all I had to do was remove the lock thing and replace, put back and screw back and I used a magnetic socket. Saved me at least $50
@MTTech
5 жыл бұрын
Nice work! Glad you found the video helpful.
@ronnny3008
4 жыл бұрын
Thanks a lot!!! It is so simple and well explained that although I do not speak English I could understand perfectly and it came out perfect. really a million thanks. and the man who repairs cars was charging me 150 dollars for that.
@MTTech
4 жыл бұрын
You are welcome!!
@unclebrucelive
Жыл бұрын
Excellent instruction....I will be doing this as soon as handle arrives from Ebay.
@MTTech
Жыл бұрын
Thanks for the feedback. Good luck on your repair!
@joemccarthy9192
Жыл бұрын
Great video. This saved me a lot of time and money. So easy to follow.
@MTTech
Жыл бұрын
Glad it helped!
@rapvj1
7 жыл бұрын
Great video, all the basic info at beginning of video saved a lot of time, just broke the handle of my 2009 Hyundai elantra. Your video saved me time and money since I use my car for work.
@MTTech
7 жыл бұрын
Glad my video was able to help you out with your Elantra. Cheers.
@mikailahiggins3911
8 жыл бұрын
You've helped me twice now. Thank you!
@MTTech
8 жыл бұрын
Haha, I'm glad that I was helpful for you. Feel free to subscribe to my channel to be notified of future videos.
@nelsonayotte4583
5 жыл бұрын
Thanks for the video. It took me less than 10 minutes to change my broken door handle.
@MTTech
5 жыл бұрын
Glad I could help!
@joeprincipato3540
6 жыл бұрын
Thanks for showing how it's done. Saved me a ton of time. Well done!
@MTTech
6 жыл бұрын
Glad I could help!
@BillMiller43
7 жыл бұрын
Very good video. I found new handle for $10 from China, made of ABS. Parts stores want $50, and say each one is a different part number! Hyundai wants much more. So I can replace all 3 on friends Hyundai for $30. Good deal!
@jpchen3987
7 жыл бұрын
where did you ordered it?
@rapvj1
7 жыл бұрын
Bill Miller, can you tell us where you find the parts, the link for Ebay in the description is not available anymore. Thanks.
@BillMiller43
7 жыл бұрын
Simple, searched for Hyundai door handle, sound several for about $10.
@clintonshort2602
7 жыл бұрын
we found new OEM parts on Amazon for $15 each. just replaced both back handles with the package (ordered Thursday, arrived Sunday on MOthers day) My wife is very happy (Next weekend I will remove them and paint them but at least she can open the doors this week with our 2 small kids)!
@rapvj1
7 жыл бұрын
Bill Miller ,that's exactly what I did. Ordered the part on Amazon on Sunday and got the part on Tuesday, I wanted to get next day delivery but it was $ 22 more . So I got a free trial and it worked out fine. Total was $13. have a great day.
@terrydudley6860
3 жыл бұрын
you saved me a bunch of money...with the money I saved I can buy my girl some flowers...thanks
@MTTech
3 жыл бұрын
Glad I could help
@marksprague582
7 жыл бұрын
MTTech: Thanks so much for video! I pulled handle on Sonada in a hurry and it broke. I originally bought. I already got handle, just need to get paint, and especially magnetic pick puller. Nice job on capture video for your showing!
@MTTech
7 жыл бұрын
Glad I could help with the video. Let me know how it goes! Good luck!
@theshadypersonify
5 жыл бұрын
This video has saved my life, Thank you sir :)
@MTTech
5 жыл бұрын
You're welcome!
@bridgetgergens6628
2 жыл бұрын
Thank you! I was so not looking forward to removing the door panel. Going to order the part right now.
@MTTech
2 жыл бұрын
Glad you found my video helpful.
@termostato
2 жыл бұрын
A piece of PVC pipe together with the magnet and ratchet works also to prevent loss of the screw.
@samsneed6238
5 жыл бұрын
Thank You! Worked just as you said it would - very easy. My local NAPA does custom paint mixing and can match almost any car paint. Was about $25.00 for an aerosol can. Thanks again, nice job.
@MTTech
4 жыл бұрын
Glad I could help.
@gk10002000
5 жыл бұрын
I am told my 2008 Kia Sorento uses a 10 mm bolt. This video says it was an 8mm on this car. Either way, if you do happen to lose or drop it and don't feel like messing with the door panel, the bolts are easy to get
@NavigatingwithNafe
6 жыл бұрын
Great footage. 👍 I have to do this for my girlfriend's daughter's 07 sonata & you provided the best detailed explanation compared to the other videos I've reviewed. Thanks for sharing!!
@MTTech
6 жыл бұрын
That's great! I'm glad you found my video helpful.
@maryellenmillour1604
6 жыл бұрын
Hello again MTTech. I just found the part! (I should have looked a bit closer before bothering you. Thanks again for teaching me how to do this. You have a new subscriber.
@MTTech
6 жыл бұрын
You're welcome!
@celb7897
2 жыл бұрын
Great, very detailed video. Thank you. Straight to the point!!
@MTTech
2 жыл бұрын
Thank you for watching.
@socratesnyongobela3628
8 жыл бұрын
Thank you so much for helping me save $200. I feel a great accomplishment for doing it myself
@MTTech
8 жыл бұрын
That's great! Glad I could help!
@EdmondLau2007
8 жыл бұрын
Great tutorial. I'll be doing this on a Kia Sorento but looking at it, they appear to be quite similar. Great step by step way on how to do it with great explanations. Thank you.
@MTTech
8 жыл бұрын
Steps should be similar depending on the model. Thanks for your feedback! I appreciate it.
@haddadw1
4 ай бұрын
Thank you very much bro, you saved me a lot of money, and I appreciate that you shared your experiences 👍 😀 .. best regards
@MTTech
4 ай бұрын
You're welcome!
@yolandarivera6872
7 жыл бұрын
Great video thank you .now I will be able to do it myself.keep up the good work
@MTTech
7 жыл бұрын
+Yolanda Rivera Thanks! More to come.
@taboo8614
3 жыл бұрын
Fantastic video! Thanks for taking the time to make this
@MTTech
3 жыл бұрын
You're welcome!
@fearmydooom
8 жыл бұрын
Thank you - just had to use this video to fix my 06 Sonata and was a 2 min fix thanks to this video - scariest part is that little bolt and scared that I would lose it in the door
@MTTech
8 жыл бұрын
Haha, yes I totally agree about the little bolt. I learned the hard way. Glad you were able to fix your handle.
@wtfjpgmailcom
8 жыл бұрын
thanks buddy this helped out a ton as the used car lot broken my wifes hundai drivers handel as he was lookin at it for trade lol
@MTTech
8 жыл бұрын
Wow that sucks. Glad you were able to fix it yourself!
@pseudoinvert7041
7 жыл бұрын
Thank you! This information is extremely helpful.
@MTTech
7 жыл бұрын
pseudo invert You're welcome!
@Patrickmetaldetecting
2 жыл бұрын
Just done this today thanks for posting this video.it was helpful
@MTTech
2 жыл бұрын
You're welcome
@francesmagee9720
4 жыл бұрын
Thank you for your excellent video! I was able to repair my door handle myself in 10 minutes.
@MTTech
4 жыл бұрын
Glad it helped!
@scottjohnson5828
5 жыл бұрын
Awesome video great walkthrough I will let you know how it goes. I am worried about the installation losing the magnet, but I will figure it out! Thank you for an awesome video.
@MTTech
5 жыл бұрын
You're welcome. You can actually use the socket to loosen the bolt, then hold the socket in its place so the bolt doesn't move, use your other hand to pull out the lock cylinder. You can then use one hand to remove and install the new handle. After, put in the lock cylinder with one hand then with your other hand holding the socket, tighten the bolt a bit so it won't fall then tighten it all the way. Its a balancing act, but that'll prevent the bolt from falling.
@sambeasley6357
7 жыл бұрын
thanks for this video. changed out the door handle in 5 minutes (2008 Sonata).
@MTTech
7 жыл бұрын
Glad you were able to do it yourself!
@nicholasj.rapanotti4830
8 жыл бұрын
This is great! It looks easy and I am lazy! I thought I had to take the entire door apart. Now I an order the parts and do it myself.
@MTTech
8 жыл бұрын
+Nicholas J. Rapanotti Yeah, the is a pretty easy part replacement. The hard part was painting the new door handle, and not dropping the little screw/bolt.
@mattyoung4080
8 жыл бұрын
perfect... had same year, same color, same door. ya saved my ass.
@MTTech
8 жыл бұрын
Haha, glad I could help man.
@saundersjones3095
7 ай бұрын
My problem is not getting the handle back on the car, but figuring out what I need to do to replace the lock portion that is missing. Any ideas? Plus, with a new lock I guess it has to be configured so my key fits it, no?
@jaeceechristensen3390
5 жыл бұрын
Thank you for this very informative video. It helped out a lot!
@MTTech
5 жыл бұрын
Glad I could help!
@jongabso9498
5 ай бұрын
Very simple! I wonder: my BF's driver side handle on his Azera appears to have broken off at the base where the gasket is closer to the lock mechanism, as opposed to at the inner latch part as it did in your video. So likely, instead of just the little bit at the end having been removed from the broken handle, the entire plastic arm from the gasket inward is still inside his door. Do you think the inner part of the handle could be removed easily with pliers through this method or does the entire door interior have to be removed in this case?
@joellimon9812
2 жыл бұрын
Thank you abundantly, god give, you more,triple fold,god bless you .0n behalf on 08 hyundai sonata car door handle exterior, it was very helpful 👍🏾 it gets annoying when you have to open other door,but thanks to your video tutorial.
@MTTech
2 жыл бұрын
You are welcome
@hectordehesa2118
6 жыл бұрын
Can’t wait to try this soon as I get home
@MTTech
6 жыл бұрын
I wish you luck!
@mattgaston307
4 жыл бұрын
I just used this walk through. Wish they would sell prepainted handles. The rear doors are a bit different and a bit more difficult to see, but the same basic principles are present.
@MTTech
4 жыл бұрын
Yeah, it would be easier for us if they had prepainted handles, but it would cost more considering they'd have to cover all colors between 2006-2010 as well as the Kia models that use the same handle.
@ericbartels6185
7 жыл бұрын
Great video. Worked like a charm on a rear door. Even *I* was able to do it. Thanks for posting. --Signed Most Repair-Inept Man Alive.
@MTTech
7 жыл бұрын
Glad it worked for you. Thanks for watching.
@StephenL128
8 жыл бұрын
Thank you for this video, I am going to give it a try and impress the wife, LOL. Great job, thank you again for the information. Once complete I will update.
@MTTech
8 жыл бұрын
Haha, you got this! Just don't drop the bolt. I repeat, DON"T drop the bolt! Let me know how it goes.
@deathlyqueen23
4 жыл бұрын
Lol! How did it go?
@gabestorm7150
6 жыл бұрын
Thank you for the video. I have a similar problem on my 2012.
@MTTech
6 жыл бұрын
No problem!
@DragonThruster
7 жыл бұрын
This was super helpful and well instructed. Thanks!
@MTTech
7 жыл бұрын
No problem! Glad I could help.
@vanseventy
3 жыл бұрын
Thanks for the video. This is why I love old American cars. Never had to do this. They got us by the balls for making money off of us now.
@boualombayluangsouvanh3086
10 ай бұрын
Looks so easy good job thanks
@anthonyandthemachine
8 жыл бұрын
Thanks for making this video. It really helped a lot.
@MTTech
8 жыл бұрын
No problem!
@Skibone21
8 жыл бұрын
My handles didn't come with a didn't come with the little clear plastic piece. Will this be a problem?
@MTTech
8 жыл бұрын
Yes it will be a problem, as inside the door a latch rides along the clear plastic piece, without it your handle will break sooner than with the plastic piece. I suggest you either contact the seller that sold you the handles or reuse the old plastic piece from the old handle if you have it.
@VevoKIlledUtube
8 жыл бұрын
Good video, wish I watched this before I took the whole door panel off XD Time to either go pull a handle from a junk yard or buy one from the internet. Thanks for the helpful video!
@MTTech
8 жыл бұрын
Yeah, some cars require the whole inner door panel to be taken out. However, this car doesn't which makes the job a whole lot easier! I'm glad you found my video helpful. Good luck!
@VevoKIlledUtube
8 жыл бұрын
Lmao back again just after 2 months having to fix the door handle. This time the passenger door was ripped off by a coworker. Why don't they just make the little pull piece metal? the flimsy ass plastic breaks off way to easily.
@MTTech
8 жыл бұрын
Haha, that's pretty funny. But yeah, this door handle is a poor design. I'm just glad that newer Hyundai's have a better quality handle. Opened some of their show room cars while my car was in for service, and the handles feel much more solid. Good luck with your second repair!
@patsanders8295
7 жыл бұрын
Great video! Helped me out tremendously! Thanks!!
@MTTech
7 жыл бұрын
Glad I could help!
@debbieparker4456
5 жыл бұрын
great video, thank you..missing the old cars with metal Not Plastic Parts
@MTTech
5 жыл бұрын
Agreed. Cost cutting at its finest.
@boualombayluangsouvanh3086
10 ай бұрын
Leaning a lot of you thanks
@altagraciapascual2876
2 ай бұрын
What are the tools you used, please.
@miguelcortes662
2 жыл бұрын
Thank you, it was so useful!
@MTTech
2 жыл бұрын
Glad my video was helpful.
@nicholaskeierleberjr3964
7 ай бұрын
Great job, great video!
@MTTech
7 ай бұрын
Thank you!
@djameldjamel3241
4 жыл бұрын
I love your tutorial! Thank you so much!
@MTTech
4 жыл бұрын
Glad it was helpful!
@dwightclark7627
4 жыл бұрын
EXCELLENT video! Thank you for uploading it. However, I had a bad experience with automotivetouchup.com and, personally, would not recommend their products. But that's just me and YMMV.
@MTTech
4 жыл бұрын
Thanks! Huh, interesting. I didn't have trouble with them at all. Then again...this video is a few years old, so things may have changed since then.
@gk10002000
5 жыл бұрын
My 2008 kia sorento front passenger side handle just broke. So this replace procedure really does look like plug and play. Do your automatic door locks and key turn all work properly now?
@MTTech
4 жыл бұрын
Sorry for the late reply. Yes, after replacing the door handle, everything works perfectly.
@clintblatchford75
7 жыл бұрын
Great video. Thanks a lot! My Sonata is black. Are the door handles for the black models painted?
@MTTech
7 жыл бұрын
Clint Blatchford No. Parts come unpainted. The handle comes in a solid black color. it doesn't have the metallic sparkles that would be on some cars that are painted black.
@eilliw40416
7 жыл бұрын
Great job man, really helped me..
@MTTech
7 жыл бұрын
eilliw40416 Thanks, glad I could help.
@maryellenmillour1604
6 жыл бұрын
Thank you for the excellent how to video. I am confident I can do this (with the right tools:). I have a 2006 Azera limited and the handles have a "chrome" accent. Any idea as to how to find the replacement with "chrome"? Thanks again.
@MTTech
6 жыл бұрын
You need part number 82651-3L000. www.fourgreen.com/store/scripts/HANDLE-ASSEMBLY-DOOR-OUTSIDE-p-826513L000
@gk10002000
5 жыл бұрын
7:37. Yep, I can see why it breaks there. As a mechanical engineer that is literally one of the highest stress points along with the thinnest amount of material
@MTTech
4 жыл бұрын
Agreed. Not sure what Hyundai/Kia engineers were thinking with that design. The fact that they used the same handle design across 5 different model years is pretty insane. At least they're newer vehicles are way more reliable.
Пікірлер: 385