Thanks for the video. I checked the metal screen before ordering a new pump. I cleaned the screen and it is working great!
@vacuumsrus
11 ай бұрын
Glad it helped!
@raybeis
Жыл бұрын
Excellent description. Everything he said was helpful, with no unnecessary filler. I appreciate the content! If I hadn't already purchased my pump I'd buy from you. Thanks!
@vacuumsrus
Жыл бұрын
We're glad to hear! Thank you!
@dawoodgul8301
10 ай бұрын
Very help full very good explanation
@craigrice3798
5 ай бұрын
Appreciate the video. With no experience I was able to replace my pump and we are up and running as good as new. Great video and instruction. Anyone with this problem following this video WILL NOT be sorry!
@vacuumsrus
5 ай бұрын
Glad it helped!
@joserodriguez724
10 ай бұрын
I just wanted to say the water pump for my mighty pro fixed the problem, and your utube video instructions did help alot.
@vacuumsrus
10 ай бұрын
Glad we could help!
@michaela.6698
3 ай бұрын
Thanks again Aiden! Great video. The replacement pump from Vacuums R Us works great. You weren’t kidding about the factory clamps being hard to get to and remove.
@vacuumsrus
3 ай бұрын
Glad to help!
@robertb.501
Жыл бұрын
This shop is awesome. The pump failed on my Rug Doctor. This video explains exactly how to replace it, and I was able to order the replacement pump from VacuumsR-Us which was delivered in three days.👍
@joshyouwa
Жыл бұрын
Your comments mean a lot to us! It's honestly a lot of work to create these videos and the people who put in the most work are not the ones in front of the camera. It takes me maybe a half hour in front of the camera to pop out a video like this. Our media lead spends hours and hours cutting and splicing it together (mostly removing me swearing). Our inventory team worked hard sourcing the pumps from a reputable supplier. Our technicians spent even more hours QA'ing each pump prior to sending it back to inventory to package and ship out to you! Finally our front end fields calls and orders for them. It really is a team effort here and your comments mean a lot!
@farklek
10 ай бұрын
Thanks! New pump went in great! It's as good as new!
@vacuumsrus
10 ай бұрын
Great to hear!
@joshfrierson1268
Жыл бұрын
Great video just replaced mine today thanks
@vacuumsrus
Жыл бұрын
Glad it helped!
@JuanCastillo-jh3vf
12 күн бұрын
Does those pump elbow are universal? I have a mighty pack that elbows get cracked and need to be replaced, are the same for mine machine,model is mp-r2d TIA great video!!
@trashbagofficial
Жыл бұрын
Which direction does the pump flow?!
@PNWTraveler
18 күн бұрын
Is it possible to replace with a higher PSI pump/motor?
@RuthLake-l6k
Жыл бұрын
Great description! Ordered part and fit perfectly.
@vacuumsrus
Жыл бұрын
Great to hear!
@omarferraez8591
5 ай бұрын
I have a rug doctor that trips the circuit breaker after it has run for about 15-20 min. I let it cool off, reset it after 10 min or so and then it runs again for another 15-20 min until circuit breaker trips again. Do you have any ideas? It’s a personal use machine. Don’t use it often. I am thinking that the vacuum motor may be pulling to many amps. Thank you.
@constanzakearney6940
Жыл бұрын
I wish I could just drive to you but I’m in AZ. Do you have a video on how to repair my rug doctor back hose. Not the ones on top, but the big thick hose (I think it’s a suction hose) that runs in the back?
@davidnunez2075
8 ай бұрын
Is that pump for the carpet cleaning mode or for the Upholstery? I have a Wide Track and it has 2 pumps
@Bitsanddoings
Жыл бұрын
I wonder if you could help me I’ve an older rug doctor it’s about 30 years old I’ve got a problem that when in hand tool mode the pump is constantly running even though main switch for vacuum and pump is turned off, I’m in the UK I’ve tried to get a wiring diagram for it but can only find the USA and Canada one, I’ve contacted RugDoctor UK and they refuse to provide me with one when it works like it’s new out of the box except for that issue. If you can help me it’s greatly appreciated
@megladon89
Жыл бұрын
Thanks for a very informative video!!
@vacuumsrus
Жыл бұрын
Our pleasure!
@donnaguest5389
8 күн бұрын
The wire connectors are different on my new pump, small females and only one male connector on the machine that is too wide to fit the new one! When I removed the diode wire, I was left with a too large female connector. What a mess! LOL
@joshuawiesman7651
Жыл бұрын
Any way to show the wiring for both the brush motor AND the pump?
@vacuumsrus
Жыл бұрын
Due to how they run through the machines it is almost impossible, especially with a tech trying to hold everything in place.
@gatorent.productionbuffrec8797
11 ай бұрын
Hello, do you have a video for no Suction
@danielgriff2659
10 ай бұрын
This looks relatively simple. Been thinking about buying a Rug Doctor Pro but I was concerned the repair of these was purposely complicated to generate repair profits. Am I wrong?
@vacuumsrus
9 ай бұрын
There are no "repair profits". Service and repair is break even at best for service centers and more often is a loss leader. The question is if a manufacturer even sells repair parts and components and offers documentation. Shark for example does not sell service components whatsoever nor does it issue schematics. Traditionally Rug Doctor did partner with service centers to facilitate repair which allowed for availability of parts and documentation. That has changed recently with newer models but we may see that change back again when they are inevitably acquired by another company.
@bobholst874
Жыл бұрын
The pump is like a shaker siphon hose. There's a 1 way valve that is in a piston inside the coil - aka pump. The water stays trapped in this and the piston freezes from rust and corrosion. You can disassemble this, making note of what goes where and this piston can be pushed out, cleaned up with fine steel wool and so can the barrel inside. You can reassemble it and reconnect everything. I just did this and I found getting axel out of the way and get at everything. There is a Y/T Video of fixing a pump. No need to spend $90-$110 on a new pump!
@markvu1575
Жыл бұрын
😍 Thank you, you save me $100.
@mitchvass4498
9 ай бұрын
Ok very good. mine had a tinge of rush pushed it out light clean workd like new. Good hint.
@WilyTuber
3 ай бұрын
Those are called OETIKER clips, and they are largely used for BEVERAGE systems. Possible Correction: Where you point and state "this is one of the pumps that has the diode inside the pump, that may be a klixon sensor it is a thermal fuse that will open if the pump gets too hot.
@debbieford5335
3 ай бұрын
My problem is mine is like yours but won't extraact
@noobgamer754
6 ай бұрын
Question is is there enough room in there to install a 135psi prochem pump from the prochem 5 star would be a doctor on steroids at that point.....
@untrendepalabras9775
2 ай бұрын
Where I can get a RugDoctor x3 pump?
@vacuumsrus
2 ай бұрын
linked in the description www.vacuumsrus.com/product/cleaning/vacuum-parts/rug-doctor/rug-doctor-pump/
@jf8322
11 ай бұрын
I have the old model smelt burning smell and it quit spraying were can I find pump motor
@joshyouwa
11 ай бұрын
If there is a burning smell there are likely issues other than the pump. I've never seen a pump smell when it goes. Often the pump cracks and the leak takes the brush motor out however. In that case you would need both a brush motor and a pump which gets rather pricey.
@jf8322
11 ай бұрын
@@joshyouwa lol it’s the pump I checked the whole machine brushes work flawless
@doobielawson702
Жыл бұрын
My machine trips the breaker as soon as I hit the red button on the handle. It does this in multiple outlets and has done it at another home. Any ideas as to why this is happening? The red reset button ON THE PLUG feels like it's spring loaded. When I press it down it pops right back up. The white test button moves a little, but not much.
@vacuumsrus
Жыл бұрын
What commonly causes this is the pump has sprung a leak resulting in water getting in to the brush bar motor. This causes the breaker to trip instantly since obviously water in an electric motor will cause a short. This typically turns out to be a repair that is not worth doing since both pump and brush motor need replacement. Generally when we open the base of machines with this symptom it is pretty obvious what the issue is since the water damage is clearly visible.
@doobielawson702
Жыл бұрын
@@vacuumsrus a friend and I opened it up. The lid to the brush motor has come apart. The portion of the lid that contains one of the screws broke off. It doesn't appear there's any water damage. We confirmed the water pump will come on and now the breaker doesn't trip. I think we could fix this.
@codyantrim8700
Жыл бұрын
Thanks man 👊
@vacuumsrus
Жыл бұрын
Any time!
@adypenney
7 ай бұрын
My pump when on carpet wont stop pumping do u no what that would be
@vacuumsrus
7 ай бұрын
If the red button engages and disengages the brush motor without any problems then this is likely crossed wires and is very dangerous. If the brush does not engage with the red button then the most likely issue is the button. Although crossed wires is still not ruled out.
@adypenney
7 ай бұрын
When pressing the botton the brush comes on and water starts. When let go of the botton brush stops but water dose not.
@vacuumsrus
7 ай бұрын
@@adypenneyyeah that's firmly in "take it to an authorized service center" territory.
@adypenney
7 ай бұрын
I live in the uk so not really a thing here. Which why i come on here
@jf8322
11 ай бұрын
We’re can I find a cheap pump
@joshyouwa
11 ай бұрын
We sell good ones. You will have to search elsewhere for cheap however.
@seanhiatt6736
Жыл бұрын
Mine came brand new without a working water pump.
@vacuumsrus
Жыл бұрын
That can happen unfortunately. Check with the company and see if you can get an exchange.
@TurkeyCreekjackjohnson_
Жыл бұрын
1,000 subscriber
@kukaida
Жыл бұрын
Why is it $100 shipping to Hawaii?!?! Ridiculous!!!
@workfromhouse
Жыл бұрын
for an island in the middle of somewhere, that sounds cheap.
@jimibel
Жыл бұрын
Bummer. They're out of stock
@vacuumsrus
Жыл бұрын
we should be back in stock today
@vacuumsrus
Жыл бұрын
yup back in stock www.vacuumsrus.com/product/cleaning/vacuum-parts/rug-doctor/rug-doctor-pump/
@netsurfrdude
Жыл бұрын
@@vacuumsrus Out of Stock again
@vacuumsrus
Жыл бұрын
@@netsurfrdude Yes unfortunately these are literally on a slow boat. We expect them to come back in stock on 6-7 weeks
Пікірлер: 67