A small zip tie would help keep it in place too. Thanks for the video
@Francois997.2
Жыл бұрын
I would do both as zip ties often get hard after a while and break.
@jorgenoneya5382
Жыл бұрын
@@Francois997.2Get metal zip ties
@Francois997.2
Жыл бұрын
@@jorgenoneya5382 Rust ? And metal will cut into the bump stop. Let’s buy a new car ;-)
@jorgenoneya5382
Жыл бұрын
No rust where im from Texas southwest. Feel bad for you and your cars if that is the concern
@Francois997.2
Жыл бұрын
@@jorgenoneya5382 No rust in Vegas, but not everyone lives in the climate we live in.
@donaldpmurt2446
Жыл бұрын
Wet your knife blade and it should cut easier. What a great idea and video, I didn't even know I had such a thing.
@CarFanatic
Жыл бұрын
Great tip!
@Hoster987
8 ай бұрын
I used an exacto knife and a vice, and worked well
@jvakos
Жыл бұрын
great tip thank you..wish I saw this months ago!!!! I paid about $1500 to have all 4 bump stops on my 996 turbo replaced. They also did the front strut mounts which was a few hundred more in parts and done within the 8 hours of labor charged. how has your fix held up? even if you did this once per year its much cheaper than the route I went down! cheers
@danzvanovec7337
3 ай бұрын
This is the wrong way of doing this. It’s a very bad idea !!!!!! The crazy glue stick to the seal. Then as you let the car down the seal of the shock lets loose. It cost me two shocks!!!! Again, bad idea. Don’t do it !!!!!
@tdiparts
2 ай бұрын
I think you're saying the glue went out the back of the bump stop and down the shaft. Use less glue, maybe some saran wrap behind the bump stop (which you can pull out after, maybe) and I think this would work. Also thinking a diagonal cut vs a vertical one is better, since on compression it will want to open up again and follow the seam of the cut.
@Hoster987
8 ай бұрын
Was about to do this and probably saved hours of my time!! How is it holding up?
@CarFanatic
8 ай бұрын
There aren't any issues yet!
@Hoster987
8 ай бұрын
Sounds good and I just did my 987 boxster both rear and front. Removing the old bump stops were difficult as well as getting the boot align.properly with those bump stops, especially the rear ones. Posted the steps on planet-9.. If this can last a year or so I would be happy as I expect the Krazy glue to dry out....
@pandabear8142
Ай бұрын
Did this on all 4 struts last year and everything is holding up fine. I taped the shaft to prevent any krazy glue from sticking. Thanks 🙏 👍
@drwindsurf
Жыл бұрын
Great tip - Thank you
@matthewtaylor9407
10 ай бұрын
So, four months in, how didnthis hold up? I need to do my bump stops on my 996.2...
@ParMonSun
6 ай бұрын
I have sport suspension too but the link you provided in the description isn't for the ones you're using in the video. Can you please provide the link for sport suspension bump stops?
@Secn00b
10 ай бұрын
Can you post the part number for the bump stops for the standard 029 Suspension? having issues finding it
@jimf5160
Жыл бұрын
excellent idea. thanks for the tip...I have a 2011 C2S same color as yours
Пікірлер: 28