Five years later I truly appreciate your detailed video! I am a 40 something year old woman and was able to replace with no problems. After just a few minutes engine light turned right off!
@TheRandomMechanic
2 ай бұрын
Im very glad that after all this time people are still watching so thank you .
@nancyirvine4797
4 жыл бұрын
Thank you for your video, I’m 74 year old woman and I was able to Chang it out with some mussel power from my 13 year old grand son thanks again
@TheRandomMechanic
4 жыл бұрын
Happy to help
@nicholoscolegrove4549
2 жыл бұрын
I really like that comment .To your grandson...your grandmother is obviously a smart woman so get to know her well young man and the things you Lear from her will stay with you for life
@MARINADUDE
4 күн бұрын
Thanks, I followed your instructions exactly and think I fixed my HHR!
@MrMyrrhlin
5 жыл бұрын
Thanks ! Great video. I have a HHR hack to share. Serpentine belt replacement calls for specialty tool that costs 59.95 at O'reillys. Then you need to cut it into two pieces to get underneath vehicle to leverage the tensioner out of the way. I cut a broom handle and placed a piece of 1 inch board on ground underneath. Placing the cut edge of the handle on tensioner and using the round end on board, I tapped it until tensioner released enough to install belt. I know there are hazards but this worked for me and may save someone 60 bucks.
@priteshpatel8194
3 жыл бұрын
Clean video clear audio thoroughly explained at a good consistent speed overall a very helpful tutorial wish they were all like this one..Thanks!
@natemishaan6410
5 жыл бұрын
This was the most informative and easy to follow video on this topic. It was a simple repair!!!
@fibblestix
3 жыл бұрын
Excellent man, making my weekend repairs easier every video!
@spheriscope
2 жыл бұрын
The Dorman ones I got were both black but each had the corresponding different plug. Got the in and out info on each at the parts store that did have them in stock. Got them in but the light didn't go out. Putting stuff away found a note to get an oil change when you do that. Got the oil changed right away and the light went out. Thanks for posting this. It helped me get the job done and saved me some money. Now on to the other problems with that devil car from hell.
@mrleger45
2 жыл бұрын
Great video. Much more informative and to the point than others I've watched on changing these out. Doing tomorrow morning on my daughter's 2011 HHR. This really will help. Good clear video and audio. And I know extra tools I'll need to pack since she lives an hour away and has no tools on her end. Looks like I'll need some shops towels for sure. Her car was throwing P0010, P0011, P0013, and P0014 codes. Thanks! PS, if you look closely, the cable end connections have different shaped plug ends for the two parts.
@RobGoblin2000
3 жыл бұрын
Very straightforward and to the point. RESPECT.
@680davidd
4 жыл бұрын
This is an excellent video. It really helped me out. Also, you might mention that the inside of the intake connector is gray or white and the inside of the exhaust connector is pink or purple. This helped me notice which was which easier.
@path.1243
2 жыл бұрын
Thank you soooooo much. I fixed it. The feeling of amazement when I drove it after completion and the check engine light went out! Again, thank you sharing your gift with us.
@TheRandomMechanic
2 жыл бұрын
You are most welcome :)
@martindesomma9623
5 жыл бұрын
Thank you for your great video. The best tutorial I have seen on this subject. The best step by step instructions and close up video hands down. Made it really easy for me to fix my car myself and save money. Thank you again.
@TheRandomMechanic
5 жыл бұрын
No problem Happy to help .
@lonfahs1612
5 жыл бұрын
Perfect visual of the job, thanks. I found a pair at Amazon for $26, OReilly's wanted $60 APIECE
@stephengibson54
Жыл бұрын
Excellent video, detailed great audio, even the details about the holding clips, thanks this is excellent!
@sandrasalazar-jay3736
3 жыл бұрын
Omg you are awesome i did have a little trouble getting the solenoid in but my brother put a little oil on the cylinder thank you so much you saved me allot of money.
@Apparel869
5 жыл бұрын
Just changed both of mine today, and the parts were $19.98 from Ebay. You get the (Intake), and (Exhaust) with a 2yr warrant. It took me about 45 minutes to complete the process, but it was well worth it. Saved a lot of money just doing myself thanks for the video bro.
@kingrichards101
5 жыл бұрын
Did you disconnect your car battery before doing the job? I only ask before I do the work myself
@chasekatiedarr5214
5 жыл бұрын
Thank you for the tutorial! I got my pair off eBay at your suggestion and about to replace 'em for a grand total of $25 and some elbow grease.
@johngilson9623
2 жыл бұрын
Thanks for the video, just a note if it is not in the comments but when you remove the air filter housing there is actually another screw toward the bottom on the left side. Most people don't remove this screw because the housing sort of snaps onto it however the plastic around this screw will sometimes break if you don't remove the screw. Also I've always got WAY better service at O'Reilly. They knew exactly what I needed and why. They even had the part numbers memorized, grabbed them both and marked them for me.
@iNetSpy
5 жыл бұрын
Very well done sir... Local Chevy dealership wanted $400 + parts to do this same service in Jan of 2019.
@trickheaddd
3 жыл бұрын
Thanks I never do my own repairs but I’m def going to do this soon this isn’t so hard thanks for the video .
@anthonywilmes9055
6 жыл бұрын
Thank you. Now I'm comfortable to do the work myself. Your awesome. Good tutorial
@TheRandomMechanic
6 жыл бұрын
Thanks , Happy to help , let me know how it goes
@kirstimanning4215
9 ай бұрын
Thank you so much for this video!!!!!!
@TheRandomMechanic
9 ай бұрын
Happy to help
@myronmiller2737
4 жыл бұрын
Thank You Your video made it very easy, Your is best how to out there.
@kitcarson9047
4 жыл бұрын
Great vid. my brother.... very informative without a lot of barn yard small talk.. keep doing vids!!
@j0hndobile802
2 жыл бұрын
Well goddamn, you got yourself a new sub.
@charlesbranham875
3 жыл бұрын
Awesome job done. Awesome informative and straight to the point. Thank you and you just scored another subscription...
@gmoney2103
4 жыл бұрын
That was so easy thank you man You're the best!
@steverussell1963
5 жыл бұрын
many thanks ...well done, easy to follow, no wasted words
@maidahpuhname9490
5 жыл бұрын
Awesome!! Now my wife thinks I’m a real man!! Thanks for the toot oreo.
@tallynmichael
4 жыл бұрын
Great video super easy fix. Mine is throwing the tc light and then then the check engine light comes on after. Its intermittent but does shift hard from 1st to 2nd when its on. Didnt realize it was this easy to change out. I found the set on ebay for 15 bucks. And I just had the whole air box off last weekend when I put a new air filter in it lol.
@arturokst
3 жыл бұрын
Excuse me sr. Does the hard shifting disappear after you change the vvp sensors? Thanks for any info
@tallynmichael
3 жыл бұрын
@@arturokst Yes it does disappear after you change it. You only need to change the intake solenoid. The one with the grey connector. The exhaust one with the black connector doesnt affect shifting.
@DoctorHemi
Жыл бұрын
1:55 You actually don't need to remove that hose clamp on the rear of the air filter assembly. You can leave it connected and just pull out the other end of that hose from the passenger side engine bay wall ventilation hole (it's just tucked into the hole with no fasteners...very easy to take out and put back). That could save you some time and aggravation.
@TheRandomMechanic
Жыл бұрын
Actually you do cause that hose unravels really easily since its just coiled fabric and they arent exactly cheap to replace technically yes you could leave it but you would most likely ruin the intake hose
@DoctorHemi
Жыл бұрын
@@TheRandomMechanic, good point, but I would think as long as you realize that you need to be very gentle when manipulating that hose, it could be an overall win to leave it on.
@Happycat-p8r
2 жыл бұрын
This has been amazingly helpful thank you soo much!!!!
@loganhicks4590
5 жыл бұрын
This was super informative and AWESOME! Thank you so much for your help.
@marcchestnut9077
3 жыл бұрын
this video helped alot may have to buy vice grips to pull them out thanks!!
@hippinator1366
3 жыл бұрын
Thank you.
@fenderbender3664
5 жыл бұрын
Thanks Much! Do some more videos! Very helpful!
@TheRandomMechanic
5 жыл бұрын
No problem Happy to help , i will try to have more videos uploaded as soon as the temps get out of the triple digits
@brucelowry3354
3 жыл бұрын
Thanks. Very informative video. Gives me hope.
@robynmarie9270
Жыл бұрын
This is so helpful. This is my first time trying to fix something by myself on a car. My engine light came on. The code is P0013. I’m assuming this will be the fix. I’m having a very hard time getting the bolts out due to them being rusted. Any advice on how to loosen them? What’s the tool you used? Also, I found a hole in the tube holding the grey thingy in place. Should I patch it with electrical tape? Also, I broke the black clip holding that white piece in place. Will that cause troubles?
@brianchesser576
2 жыл бұрын
Nice video very helpful
@77vmr
4 жыл бұрын
Awesome vid Bro! Thanks for the help! Boston, MA
@nicholoscolegrove4549
2 жыл бұрын
Okay ,um years of experience as an auto motive technician...I'd blow out any debris with an air wand shoot a shot or two of PB blaster down where they actually go into the intake. If a guy has spark plug pliers these would be ideal.my self I take a rubber glove and slide over the solenoid for extra grip and use a pair of channel locks to turn and wiggle and one of my nylon interior panel pry bars . I can't imagine what a pain it would be if one of these broke while trying to pull it .I've not experienced that but I wouldn't want to either. I'm thinking its possible like an egr valve to soak it in some carburetor cleaner or diesel fuel and brush it and blow it off and it may work. I've been able to accomplish things like that before as well. As a repairman that's mindful of things like oil eats rubber ,a guy could use die electric grease both on the o ring and the electrical plug .personally I use just a small amount of water based lubricant for the install. I ran a small automotive repair shop for years before fabricating race cars and now head up an auto motive repair outreach program through our church and in all actuality I'm going to pull the wife's HHR out back here momentarily and perform this procedure.incidentally this is a perfect time to replace the spark plugs if its been awhile .
@ATX45
2 жыл бұрын
Great video, thanks!
@Shawps
6 жыл бұрын
You made this very easy for me thank you.
@TheRandomMechanic
6 жыл бұрын
No Problem , Happy to help
@cindyleggett8946
5 жыл бұрын
Nice to know how to take off the retaining clip without breaking it!!
@bossbullyboy195
3 жыл бұрын
Amazing and glad I found this...new sub
@ottodetroit
5 жыл бұрын
thx, this helped alot. Will get 'r done today hopefully !
@victorbaciogaxiola3834
2 жыл бұрын
thx a lot
@curtn7076
5 жыл бұрын
Nice and concise video! THANKS!
@TheRandomMechanic
5 жыл бұрын
No Problem , Happy to help .
@renemartinez-cabrera9245
4 жыл бұрын
Thanks man this video really help
@oxygen454
2 жыл бұрын
If you want to test before replacing, the ohms resistance should be close to in the range of 4.1 to 7.7 ohms on intake and exhaust solonoids. Also adding 12 volts to each should make them click.
@saadaldinabdelnabi4020
3 жыл бұрын
Good job thank you
@praautoss6613
6 жыл бұрын
Nicely done 👍🏽
@TheRandomMechanic
6 жыл бұрын
Thanks !
@praautoss6613
6 жыл бұрын
The Random Mechanic u are welcome 🙏 I’m gonna do one ☝️ on this vehicle 🚗 before my client comes to pick it up this weekend 👍🏽
@darryllawler2777
4 жыл бұрын
Great video. Thank you so much.
@ibrahimnasser4167
4 жыл бұрын
Thank you
@maniacalgorilla
5 жыл бұрын
Helped me a lot
@TheRandomMechanic
5 жыл бұрын
Glad to hear it , Btw love the channel name
@freddyarana1969
4 жыл бұрын
My HHR turns on SERVICE TRACTION / SERVICE ESC continuously and the Check Engine too, take it to AUTO ZONE and the code that indicates is: "Definition: P0301 indicates that Cylinder 1 had too many misfire within a predetermined period of time", And in "Error codes Read : P0301 Cylinder 1 Misfire Detected", what I recommend is to change the coil and spark plug, I did it twice and worse each time the SERVICE TRACTION / SERVICE ESC indications are always on now, which were previously deleted when the car was turned off and on. It does not give more alarms but I think about changing these selenoids since the flaw is that the changes kick when changing speeds and other mechanics indicated that they were these selenoids.What do you recommend me?
@gotcho34
5 жыл бұрын
All these years I drove with my TC light on and this is all it was. Hell I could have fixed this myself. I currently have my car at the mechanic getting this fixed along with an oil leak and tune up
@joessepirangel7744
2 ай бұрын
How much do they cost each
@Val_Gal_2017
2 жыл бұрын
Camshaft position timing control solenoid
@Val_Gal_2017
2 жыл бұрын
Camshaft Position actuator solenoid valve
@nena_366
5 жыл бұрын
Same exact error codes appeared with autozone paper.i have a 2011 hhr..My husband is going to follow your video....I will update when he is done😊 In the meantime, is it safe to still drive?
@TheRandomMechanic
5 жыл бұрын
We kept driving ours while the part came in , as long as it doesn't appear to be running rough it should be fine you just wont be able to pass inspection .
@lewisautomotive9853
5 жыл бұрын
Love the Harbor Freight light ! . ;-)
@TheRandomMechanic
5 жыл бұрын
Heck yeah you gotta love the 20% coupons one free flashlight with any purchase . i have 4 of them lol
@lewisautomotive9853
5 жыл бұрын
@@TheRandomMechanic ...what part of the country do you live ?
@TheRandomMechanic
5 жыл бұрын
@@lewisautomotive9853 I live in texas
@lewisautomotive9853
5 жыл бұрын
@@TheRandomMechanic ...... thanks for the video ....I missed buying the car today by only minutes .....your info allowed me to try to buy it with confidence that I would know the actual repair ..... From an old man [ 68 ] that has turned wrenches for most of his life .... keeping up is difficult .....and guys like you and Eric O at South Main Auto Repair help me try . As I told someone in 1969 ..... . As always my friend ..... . Keep on ........... . Keepin on ...... .
@MasterMex1
4 жыл бұрын
What symptom do you have before change the actuators?.. I mean whats the reason you need to change that VVT VALVES
@AdamMT1618
4 жыл бұрын
I tried this using aftermarket solenoids, what a mistake in buying the $30 set from Amazon. My car idled dead and still threw the errors. So I ponney'd up the $90, bought a set of ACDELCO OEM (GM) and it worked great.
@TheRandomMechanic
4 жыл бұрын
You may have gotten a faulty one , it happens
@AdamMT1618
4 жыл бұрын
@@TheRandomMechanic Possibly, I checked the resistance on the aftermarket ones and they checked out. Other than that I have no idea why neither of the solenoids in the set worked. I read a review by another person who had the same problem. I'm not suggesting that aftermarket parts should be completely avoided, in this case, I didn't want to try another aftermarket brand until it worked. Believe me, I'd rather have paid $30, the $90 set from Acdelco for something so simple makes me shake my head. It's obvious by reviews that aftermarket Solenoids have worked for other people.
@xsteel3292
3 жыл бұрын
I had the scan P0013 and P0014 and replaced them. After driving 30 miles the check engine light went off on it's on. Cool, right? The error code is still posting when scanned to get inspection. Now they are saying it's the wiring harness. If it's the wiring harness to the actuators, then how did the car process it to turn the check engine light off.? This is crazy. Great video and was easy to replace with the help of this video. Thank you! I did NOT clean the codes after replacement. Should I?
@oxygen454
2 жыл бұрын
Did you ever get this figure out?
@streetfighter1234ish
Жыл бұрын
now when loosening them dont wigal back and forth they will break at the base and my black one was in the front buy the the part from ebay lot cheaper
@joesims2895
2 жыл бұрын
Can't locate the solenoid to replace on the eco tec 2.2
@brittanycooke1667
5 жыл бұрын
So helpful
@Kasperisalive
4 жыл бұрын
I replaced mine, and when I started my car to check it said service esc, service traction and when I re looked under the hood there was oil coming up from under the Camshaft Position Solenoid
@TheRandomMechanic
4 жыл бұрын
it may have a damaged Oring on the solenoid
@TheRandomMechanic
4 жыл бұрын
our car often says service esc and that is normal , it does it at random because you are supposed to replace your tpms sensors in your wheels every few years but we havent , sometimes it just means that you have to air up your tires perhaps one is low
@Kasperisalive
4 жыл бұрын
@@TheRandomMechanic I took it to a small business mechanic and he fixed it, the little ring where the screw goes in was bent and it wasn't allowing the sensor to go in all the way. problem solved!!
@Kasperisalive
4 жыл бұрын
@@TheRandomMechanic and thank you!
@brandonbath6097
5 жыл бұрын
Thank you!
@carolynprator8441
Жыл бұрын
Why would everything be soaked with oil
@citywide550
5 жыл бұрын
Should I disconnect the battery first? Thx!
@TheRandomMechanic
5 жыл бұрын
You don't have to but you can if you feel more comfortable , i didn't disconnect the battery
@citywide550
5 жыл бұрын
@@TheRandomMechanic thx buddy, appreciate it keep up the good informal videos
@lexuses3942
3 жыл бұрын
Is their a way to clean these ? Before buying
@TheRandomMechanic
3 жыл бұрын
its not so much that they are dirty it is that something internally failed , i am not aware of anything that can be done to temporarily repair them , sorry
@randyhowell7544
4 жыл бұрын
I can't get the parts for a few days, ok to drive in the meantime? Like 300 miles? It just runs a little rough now and then.
@TheRandomMechanic
4 жыл бұрын
It should be alright
@katelynnetyrrell7304
3 жыл бұрын
Is there a big difference between the error code P0010 and P0011?
@TheRandomMechanic
3 жыл бұрын
Not much , p0011 is also caused by a malfunctioning camshaft solenoid , now weather or not the solenoid is bad or the fault of the ecm giving it bad infornation is the real question , i would say go ahead and replace the two cam acuators since they are far cheaper than an ecm , 90% chance this will fix it , let me know how it goes
@tammyjumpp7663
5 жыл бұрын
Thank You!!!!!!!
@TheRandomMechanic
5 жыл бұрын
No Problem , Happy to help
@reythegreattt9576
3 жыл бұрын
I replaced the parts but than I went to take the car for a test run and the car leaked oil pretty bad all over the place. What did I do wrong? I'm thinking a didn't push the solenoids down all the way?
@TheRandomMechanic
3 жыл бұрын
It sounds like it didnt seal right , check that they are completely seated and that the seals arent damaged
@valemodsVD
3 жыл бұрын
I changed them both in the proper way, not forgetting any steps but the engine light is still on. Also theres a bolt on the left side below the air box that needs to be unscrew in order to take it off, this video don't mention it and I think I damaged the bolt hole with the rubber seals.
@TheRandomMechanic
3 жыл бұрын
The light wont go out immediately , you may have to drive up to 50 miles for the computer to reset , you can reset it by unhooking the battery for 30 seconds , if the light comes back on then you may have recieved a defective part which happens more often than you might think .
@valemodsVD
3 жыл бұрын
Ok thanks! I'll try that
@roycassity8328
3 жыл бұрын
will this repair make the check engine and TC lights go off?
@TheRandomMechanic
3 жыл бұрын
The check engine light yes , the tc light is another issue caused by either low tire pressure or faulty tpms sensors in the wheels
@MsAnna2U
4 жыл бұрын
I got the codes P0010 and P0011. Are the two you just replaced BOTH of these? I know one is the P0010 like you paper from Auto Zone said, but curious if the other one you replaced was the P0011?
@TheRandomMechanic
4 жыл бұрын
It sounds like that is the case , i replaced both of them mainly because i didn't want to do the same job twice , this is what it says on one of the forums , " P0011 Symptoms Poor Idle Quality- If the camshaft actuator fails while giving the engine aggressive valve timing, it'll idle roughly. Decreased Gas Mileage "
@MsAnna2U
4 жыл бұрын
@@TheRandomMechanic Thank you so much.
@TheRandomMechanic
4 жыл бұрын
@@MsAnna2U No problem happy to help .
@Whatscookingathome
4 жыл бұрын
Has anyone does this and the check engine light doesnt go off...I did it exactly like you said I had the same codes from autozone changed both of them and the check engine light is still on
@TheRandomMechanic
4 жыл бұрын
how far have you driven it since changing them ?
@washingtonmcfarland4710
3 жыл бұрын
What if you do, strip the threads
@TheRandomMechanic
3 жыл бұрын
That would suck to fix , the first thing that comes to mind is using a tap and cutting new threads a size over then using a wider bolt
@squirrelmasters
3 жыл бұрын
I am having an issue the solenoid wires were cut and I can’t find any other wires with cut ends on them so i can wire these back up
@TheRandomMechanic
3 жыл бұрын
as long as you have enough length to do so i would say you need to try to fix those , solder , and liquid brush on electrical tape to keep them from corroding
@squirrelmasters
3 жыл бұрын
@@TheRandomMechanic i can not find the wires that the camshaft actuator connectors wires were cut from i have no idea where to connect the wires i pulled all the conduit crap off all the wiring and I can’t fid anything
@squirrelmasters
3 жыл бұрын
kzitem.inforyYJOsLlePU?feature=share here’s a video of what i am dealing with
@TheRandomMechanic
3 жыл бұрын
@@squirrelmasters thats not good
@TheRandomMechanic
3 жыл бұрын
@@squirrelmasters does it look like it could have broken off inside the connector ?
@JuanMorales-ks4ll
3 жыл бұрын
perfect
@jhuntosgarage
5 жыл бұрын
Grey is intake and black is exhaust.
@lewisautomotive9853
5 жыл бұрын
Did you turn the rear hose clamp around ?
@TheRandomMechanic
5 жыл бұрын
I sure did .
@tallynmichael
4 жыл бұрын
@@TheRandomMechanic I turned mine around when I did the air filter. I was like what dummy put this clamp on backwards haha.
@PaulAliceJ
6 жыл бұрын
What year was this car? My neighbor was told they would have to pull the transmission on her 2006 HHR
@TheRandomMechanic
6 жыл бұрын
this car is a 2011 , it should be in the same place on the 2006
@Oskar_Panacea
4 жыл бұрын
I have a 2006 hhr 2.2 ecotec but those actuator solenoids are not there for me. I just have one big coil pack with an ignition control module.
@ialastairi115
4 жыл бұрын
do you need to unplug the battery to do this?
@TheRandomMechanic
4 жыл бұрын
It isnt necessary to unplug the battery , as long as the keys are not in the ignition it will be fine
@ialastairi115
4 жыл бұрын
@@TheRandomMechanic sweet thank you, im ordering them tonight and replacing them as soon as they come in. My car is trying to die when idling and is fluctuating when driving and the 10 codes on my reader are all the cam sensors.
@valemodsVD
3 жыл бұрын
will this work to fix my hhr 2011 error code P0010 (Bank 1)? I got two of this same error code
@TheRandomMechanic
3 жыл бұрын
Yes , our hhr is a 2011 , this will fix it
@jonathanlimon4967
4 жыл бұрын
It is safer to disconnect the battery first ?
@TheRandomMechanic
4 жыл бұрын
As long as you don't have the ignition in the on position it shouldn't be an issue , you can unhook the battery if you want to , i didn't mainly because its such a pain in the butt to get too
@jonathanlimon4967
4 жыл бұрын
@@TheRandomMechanic it took me about 20mins to exchange both of them and it worked . I appreciate your help
@TheRandomMechanic
4 жыл бұрын
@@jonathanlimon4967 Happy to help
@markdemian5547
4 жыл бұрын
if u got the cash buy the gm oem solenoids,,,,bout 38 ea......
@beardsbucks2365
5 жыл бұрын
What year is the HRR
@TheRandomMechanic
5 жыл бұрын
it is a 2011
@andyc8836
4 жыл бұрын
Save yourself a $260 buck dealer repair the actuator goes about every 400 remote starts faster if you don't keep oil level normal OK 15 minute fix I replace both along with plugs
@wildhog3217
4 жыл бұрын
My error code is P0013 for a 2009 HHR for those same sensors and location.............HuH
@bookwyrm3385
4 жыл бұрын
Can having to replace these help cause an oil leak, or do I have yet another issue I have to fix? Hah. It's a neverending story. (P0013 and P0014 were the codes I got.)
@user-qk7et9kh5k
6 жыл бұрын
Why would you disable comments on cataclean video
@TheRandomMechanic
6 жыл бұрын
i didnt know that the comments were disabled on that video , youtube has been glitching out alot lately , i have had alot of problems with receiving comments and having settings change on videos at random ,
@doccpu7
2 жыл бұрын
Sweet video.Looking forward to the project.Wish they didnt build such complicated garbage anymore.didnt improvemileage or emissions that much but the cost of repairs has become a major expensence of car ownership.Chevy makesafortune off their plasticknobs,leversand door handles that break break break. Plastic american garbage.
@rightglve
5 жыл бұрын
Thank you so much for this video
@Astralpilot2.0
4 жыл бұрын
What noise does the car make that indicates that is bad? Mine is turning over and not starting
Пікірлер: 166