√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@xzx4696
Жыл бұрын
Thats my motto do-it-yourself and save money! Good to see people still teaching and showing ways and how to fix things yourself Instead of relying on others to fix the issue
@samsaunders1107
Жыл бұрын
If anyone plans on doing this at home do NOT USE DORMAN BUSHINGS YOU WILL END UP WITH THEM CRUMBLING APART!!!
@unicornsqueezins7906
Жыл бұрын
While this guy got lucky, I would highly advise against hammering in the bushings, because they shatter easier than your hopes and dreams! Use a bolt and nut to "pull" them in squarely.
@scott9478
2 жыл бұрын
This helped me a ton. What I didn’t know was how weak the brass bushings are from dorman as I cracked one of the new ones installing it
@pale1889
2 жыл бұрын
Bronze lol
@pnwadventurer9674
2 жыл бұрын
Hahaha I just posted about this too
@trevonball3278
Жыл бұрын
Cunningham machine has the best ones on the market
@Twag-yh8xc
Жыл бұрын
My compliments. Clear, concise, good camera angles and explanations.
@TRQ
Жыл бұрын
+Twag1958 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
@Chris_at_Home
3 ай бұрын
I just did this after watching your video. Thanks for your help. I have two garage doors close together. I backed the truck in till the door was under two garage door rails by the support. I used two ratchet straps along over the rail with the jack underneath similar to the way you did it. I also used a 1/4” bolt with washers and a socket to press the bushings in.
@ZZZRSC
2 жыл бұрын
Its nice to see a Professional do the work with detailed instructions. I knew you were a Pro when I saw you using brass punches the way it should be done.
@OGfancy420
11 ай бұрын
Video helped, just changed mine with parts suggested. Unfortunately the new door hinge pin with the roll bearing was too big and wouldn't fit so I had to reuse the old one. Still works but quality control failed me on that one.
@obsdwayne
Жыл бұрын
Going to do this today! Thank you guys! I wish there was a video on how to change out the Blend Door Actuator 😬
@TRQ
Жыл бұрын
+OBS Dwayne We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ
@pwlyons759
2 жыл бұрын
Best hinge pin video I've seen out of the three watched Thank you
@youngdustin25
Жыл бұрын
Just wanted to say thank you for a great video. Just completed this job and your guide made all the difference.
@eddyhewitt4726
5 ай бұрын
This video was GREAT. Thanks for all the step-by-step instructions and close-up shots of the actual replacements.
@BeRae12
3 ай бұрын
Great vid. Much better than the others I wasted time watching. I just wonder why you're used the Pin retainer? My parts came with new ones.
@tedmaguire1110
6 ай бұрын
I got great bushings from Cunningham machine and tool to install great company great stuff
@christopherthompson4389
Жыл бұрын
Idk wher you got your kit but the ones in your link are exactly like Dorman. They were like they’ve been made of clay.
@warrenw2u
7 ай бұрын
Thank you for making this video. I found it excellent and it reassured me that I can do it properly.
@mrManos-fd9sn
2 жыл бұрын
great video you just taught me how to do my own doors I really appreciate it
@celticman138
Жыл бұрын
Bought a pair, the bushings were some type of brittle pot metal. Did not last. Where do you get parts with quality bushings?
@Deltaparker
11 ай бұрын
This KZitem channel is the best
@Chubick
2 ай бұрын
Loved the video helped me install my Cunningham machine parts
@cbernstorf
2 жыл бұрын
This is how you make an instructional video.
@Someguy3.8
6 ай бұрын
Is that the same spring compressor tool you would use on a 2004 Buick Regal? What about the process?
@mikey3570
4 ай бұрын
So what to do next if the door is floppy as described at the end?
@luisahuejote129
Жыл бұрын
Hey @TRQ can i use the exact same pieces you uses in this videos to fix a 1988 chevorlet c1500 door hinge
@miguelrobledo875
Жыл бұрын
Does it apply to Suburbans of the same year
@cameronthornton6624
3 ай бұрын
Confused me because the bushings go in one side of the body and one side of the door but after I figured that out it was easy. Bought a 20$ set off Amazon and they came with everything and worked fine, fixed my door sag and it rubbing on the bottom of my cab. Thankfully my holes were not wore out but if they are for anyone else, get oversized pins off the internet (cost more 100$) and hammer them in.
@cj8172
2 жыл бұрын
Is it a good idea to put grease on the inside of those bushings before driving the pins in?
@Mo-Khan
2 жыл бұрын
Thanks for uploading, please restock the kits
@louishurr393
2 ай бұрын
That was excellent!! Thank you!
@luismaldonado562
Жыл бұрын
Thank you your video has VERY HELPFUL. 👍🤝
@TheDonConrad
2 жыл бұрын
Yes very nice video, I'll be ordering parts soon.
@HadenPeon
2 жыл бұрын
Where can I get that spring compressor? Or one that small
@Aaron-xq4gl
Жыл бұрын
Hey it's the 1A auto guy
@chieftejay
10 ай бұрын
How much is labor for this job per door or for both ?
@JasenFromBoston
Ай бұрын
well done Brofessor, I love that, i'm smiling but still super angry and may hurt you vibe.
@gabrielkoby6308
2 жыл бұрын
Your roller pin went in way too easy. I hammered for hours before grinding some splines to get it to finally fit. I even used a tapered sanding roll in the hole first to clean out any burrs and help the install. Gonna fabricate a press tool for the other side. Other than that, it’s a simple process.
@skindianu
Жыл бұрын
Same here and I used an air hammer. I haven't gone as far as to remove any splines yet, but if this doesn't go in within the next 30 min, I'm going to try that.
@mikee1369
11 ай бұрын
I need that spring compressing tool...anyone know the proper name of that tool been trying look it up to buy one and cant find it?
@JACKALBACK
Жыл бұрын
Where they regular bushing kit or heavy duty
@joebourke1018
Жыл бұрын
Awesome video thanks
@buddygallagher1193
Жыл бұрын
Please sort of video I learned something appreciate it
@ropenstein
2 жыл бұрын
I wish there was more focus on the cam roller pin. Mine appears to be flared/staked at the top, so I’m thinking there’s going to be a Sawzall involved.
@skindianu
Жыл бұрын
I used a die grinder to remove the flare at the top and on the re-install of the new roller pin I used an air hammer
@curtismcdaniel6264
Жыл бұрын
Thank you sir!
@shrekscousin6926
2 жыл бұрын
Need a tool like that. Compress spring.
@HK-qj4im
Жыл бұрын
I bet changing the top one solves the issue. Seems to be the one that's always worn out.
@col.0292
5 ай бұрын
Surely this can be done without removing the spring
@luperojas2817
Жыл бұрын
Thanks
@carlosbravo201
Жыл бұрын
I need the spring tool name please
@madmikescustomDaily
Жыл бұрын
Wow y’all the best #MadmikescustomDaily #KZitem #TRQ
@kani4mac
3 жыл бұрын
I liked this video! To the point and easy to follow. TY
@albertlatscha
Жыл бұрын
Even with that tool to compress the spring I can get it to fit
@bartsiegwart2996
2 жыл бұрын
Great. Good Job. I subscribed. Make more.
@Deltaparker
11 ай бұрын
I could of figured it out but just watching a video on it before going in just is the mandalorian way lol😅
@mrhamburger6936
2 ай бұрын
The save yourself a lot of this work if you oil to your hinges on a regular basis
@pnwadventurer9674
2 жыл бұрын
Don’t use dorman hinge pin kits either!!! The bushings are copper and they just crumble!!! I don’t get why they are so crappy
@michaelkennedy6000
2 жыл бұрын
Hey! What bushings do you use? I’m in Canada and Dorman aren’t too great.
@PastanDa
2 жыл бұрын
Yeah my Dorman bushings shattered aswell. But if you look at 1A auto they look the same as Dorman. Not at all the same as in this video.
@edgardomatos7742
Жыл бұрын
Very well explained. Thank you
@tomallen9075
2 жыл бұрын
You’re a harbor freight man; the wire brush gave you away. No shame. I’ve got the same one.
@rommeljaramiillo6590
2 жыл бұрын
En donde las consigo en Ecuador
@michaelroyal3509
10 ай бұрын
What if I don't have a door spring
@OGfancy420
Жыл бұрын
I like how a replacement door striker doesn't exsist :/
@therealdramey
Жыл бұрын
✅
@mountainman8908
Жыл бұрын
Have never seen a hinge pin clip as shown
@petergreenan9178
Жыл бұрын
Yes never turn spring toward your face, as he does. lol
@perrydavis3612
2 жыл бұрын
I tried your directions- watched your video many times - not so good - bushings shatterd when tried to put it an didn't really tap on them like u did - the wiring boot is right in the way an difficult to work around - the jack had to be moved up an down many times- overall nothing happened like it did for you- nothing- left it an gonna take to a bodyshop- learned my lesson about utube videos
@domingueze93
Жыл бұрын
I bought these and they didn’t fit my truck
@user-qt8zt6zg6w
Жыл бұрын
Do not buy cheap bushings. Ac delco or cuningham machine are the only ones that dont crumble when you look at them
@flowmaster71485
2 жыл бұрын
Bet they didn’t last 3 months using a hammer to knock those bushings in.
@sanjosesteve
6 ай бұрын
TRQ makes good videos but has extremely poor quality parts. If you want to have to do the job twice, try TRQ first.
@drifter233
2 ай бұрын
Bro got that ChrisFix energy lol
@matthewharrington5246
Жыл бұрын
how come he can hit the new bushing with a hammer and they dont just fucking shater but if i so much as drop one of the bushing and let them hit the ground, they just fucking shater into pices
@skindianu
Жыл бұрын
I pressed mine in with a c-clamp and socket and they still cracked.
Пікірлер: 82