Okay, so hands down the best instructional and sales video I've ever seen.
@SailriteDIY
8 ай бұрын
Thank you for your amazing feedback! It means a lot to me that you found the video helpful. I put a lot of effort into creating content that is informative and engaging, so it's great to hear that it resonated with you.
@downfallofwow
8 ай бұрын
@@SailriteDIY I really liked how you included part numbers for what you were using
@deanslegos1990
4 жыл бұрын
I average 60 hours a week on KZitem. This is a HIGH QUALITY STANDARD video. Thank you.
@SailriteDIY
4 жыл бұрын
Thanks for your positive comment!!!
@angel_the_gamer_girl5909
3 жыл бұрын
@@SailriteDIY 8 0 888p080808p 0 08p8p9pppppppppppppppppppppppppppppppp 9pp pop ppppopoopiip up IP Dr
@TWMAC2011
2 жыл бұрын
Great tutorial. Getting the old, stiff sling fabric out was a challenge. After taking one side out, with a good deal of effort, I had an idea....Dawn to the rescue! I put a thin bead of the dish detergent on each side of the fabric, ~ wiggled the fabric back and forth as you did. Then my husband slid it out with the vice grips pretty easily and quickly! As we needed to give the chair a final clean, win win!
@patioex
7 жыл бұрын
we make and install hundreds of slings every year, a few more tips... mount the rails to the chair frame, one side at a time when sliding the sling down the rail. its much easier to do when the rail is supported. trim the spline and cap the rails before installing the spreader bars, it's easier to do when not under tension. most chair styles only require one rail to be taken off for installing the sling. to make it easier to slide heavy fabric into the rail you can slightly nib the corners of the rail channel. it's also easier to cut and slide the old fabric out of the rail with the rails still mounted to the chair frame. spraying water down the rails will make it easier to slide the old fabric out. great video guys!!
@SailriteDIY
7 жыл бұрын
Excellent suggestions! Thanks!!!
@sdjfromMN
3 жыл бұрын
Wow! What a phenomenal instructional video! I was going try to find someone to redo our chairs, but after watching this detailed video, I think we can actually do the job ourselves. Your formulas, explanations, and instructions...in addition to fantastic detailed video; make it easy for the most inexperienced DIYer feel confident to take on this project. Thank you so very much! I will be figuring out my measurements and be placing an order next month.
@SailriteDIY
3 жыл бұрын
Thanks for the very kind comments! We appreciate your loyal patronage to Sailrite.
@marythecontrary
Жыл бұрын
Having grown sons, I see how excited yours was, to help you. 😂 I'm wondering how he feels about it 5 years later. I'm betting that he's grateful for the time spent with you and learning how to restore something in order to save money, instead of buying something new. ❤
@goldensmamma
2 жыл бұрын
I want to thank you for the fabric calculator it is great help. You don't waste fabric ! I used it to make dog beds and had barely any scrapes worth keeping. Great videos always too! THANK YOU !
@cuervojones4889
4 жыл бұрын
After FINALLY replacing the fabric on my glider, I feel compelled to point out that the dude here is a PROFESSIONAL so he makes it look like a walk in the park. In truth, there will be much cursing and gnashing of the teeth! But don't give up! Just watch the video again - especially the part about bending the tension bars if they won't fit. They seem to get straighter over time as weight is applied so bending them a little will help them fit back into the rails. Once it's done, you can brag about how you "upcycled" your old patio furniture and made it all match! Way to go!
@ArthurDent0042
4 жыл бұрын
I don't know about MUCH cursing. I've never used a sewing machine before, and I only cursed a little bit. (Not nearly as much as when I sat down on the chair and the old material ripped on me.) ;) If a complete novice like me can do it, I'm sure pretty much anyone can. MANY thanks for the helpful video (and great sling material, too)!
@efrainreyes6833
4 жыл бұрын
Simply put, this is one of the BEST instructional videos I've come across on KZitem. I was planning on ordering slings for my 22 year old 6-piece Tropitone patio chairs. However, the cost...and mostly the delay in receiving them in time has me changing my mind on that. I am very experienced at sewing machine work and this video makes it abundantly clear that this is entirely doable at home. Now if I could find a heavy duty sewing machine so I can employ heavier duty, more durable fabric on the project. The fabric weight chart was super helpful. Great job guys!!
@SailriteDIY
4 жыл бұрын
Glad you like it! You can do it.
@luthiersmercantileinternat5786
6 жыл бұрын
I thought this was a great video. I don't get how anyone could give it a thumbs down. I took my chairs apart and ordered the fabric for about $100 and very little will go in the landfill. Seems like a good deal to me. Thanks for the lengthy and very informatiive video.
@SailriteDIY
6 жыл бұрын
Thanks for your positive comments and good job replacing your sling fabric.
@musicman1685
4 ай бұрын
It’s because the average Joe doesn’t have a sewing machine, for example, so that automatically cancels me outta this “very easy DIY”. Now I have to hire someone to sew these.. I was very disappointed.. maybe there’s a glue method for this step .. but I quit watching so I’ll never know. Stop bringing Pros in these videos making us believe it’s sooo simple.
@christicarl4612
4 жыл бұрын
This is a great video to watch if you have never done this because they have covered all the parts, especially the corded part that was very hard for me to do. I like that it is a family thing. It makes for more warm family memories when they grow up. I remember doing things like this with my family when we all joined in to help make our old cabin cruiser new again. I will never forget those happy times, it made us a closer tight net family. Making family memories for tomorrow. What a great video.
@SailriteDIY
4 жыл бұрын
Glad you enjoyed it!
@katmahbub
5 жыл бұрын
This is one of the best instructional videos i have ever seen, using the best descriptions for the tiny movements and chair parts, so I know exactly what i need to do. I hope I can salvage my 4 old chairs that cats have been sitting on and ruining the fabric.
@SailriteDIY
5 жыл бұрын
Glad you liked it! Let us know if you have any questions.
@deborahlabarbera4822
3 жыл бұрын
This video was great. I ordered the fabric from Sailrite, and I did the sewing. My boyfriend helped me sand and spray paint the chairs. It was a little hard getting on the fabric tight enough, and we did end up buying 2 new stretching clamps. The chairs came out great, they look brand new. Thank you Sailrite, I love your videos.
@SailriteDIY
3 жыл бұрын
We are so glad your sling chair project went well! Good job!!!
@bking0220
4 жыл бұрын
Ha, ha, four years ago I bought the Sailrite fabric to repair a chair. This weekend I finally completed the project with your help! Great, great video. Best tip is stapling the fabric before sewing. Genius! Thanks.
@SailriteDIY
4 жыл бұрын
So glad that you liked it.
@luthiersmercantileinternat5786
6 жыл бұрын
I was doing this myself and had a problem pulling my material through the channel even after widening it because it has long floats (threads that do not intersect) and they kept getting caught on the opening to the channel. I found it really helped to use a zipper foot and stitch along the spline cord. I also use a bit of WD 40 to lubricate the channel.
@jillaristizabal8188
6 жыл бұрын
Can you die the covers to a different color
@georgehebert1
5 жыл бұрын
V out the ends of the channel with a hand fils and use a silicon spray for a easier install.
@georgehebert1
5 жыл бұрын
files
@lindasacco7635
11 ай бұрын
Hi, I did tayloring for over 20 years and found this video very helpful!
@SailriteDIY
11 ай бұрын
Glad it was helpful!!!!
@simpleandgrandlife1274
3 жыл бұрын
This was an extremely well done video! I was a bit intimidated by the project before me but now I am completely confident. You did an excellent job carefully explaining every important detail and showing it on the video. Thank you so much!
@SailriteDIY
3 жыл бұрын
Glad you like it!
@Civilcaveman.
4 жыл бұрын
The fabric is really easy to put on, a certain way. I accidently made a couple fabrics too long, and instead of removing the stitching, we just folded the hem and made a pocket at one end. So we slid the pocket end first and as we pushed the sleeves in, the poles helped push the sleeves through. It was pretty easy and fast. We did the last three like this because those were the ones I screwed up, but ended to being the easiest ones to put together.
@mmiinncchheerr
4 жыл бұрын
Some Sunbrella, v69, and my mother's old Kenmore sewing machine, and I was able to very easily replace the backs of 6 chairs. Replacing was very easy as I think the chairs were better constructed than most; didn't have to fight the spreaders as much as you did. This is my second project with materials from Sailrite -- previously replaced the seat and back on a wooden glider with Sunbrella and that has survived years so far in the snow and sun near Yosemite. I keep thinking I'll buy a Sailrite machine, but that old Kenmore just keeps working. Definitely need the hot knife for cutting Sunbrella.
@michaelpatenaude3434
Жыл бұрын
Awesome video. The trick about bending the horizontal support bar was epic. That solved my biggest challenge. Thanks so much.
@pamelakaplan617
5 жыл бұрын
Thank you for an excellent guide. I referred to the video again and again during my project! My hands are somewhat sore but worth the effort . Its like I have completely new patio furniture for a fraction of the cost! I have a suggestions for your readers you may want to add to the instructions (or not!) 1. I used 3" long metal hemming clips - the 3 inch long metal ones with quarter inch marks. Helped alot when sewing the hems! and are an easy way to semi crease the fabric where desired.. . I will use again and again for various home projects and easier to use for my arthritic hands vs pins! 2. Please recommend readers get a heavy duty longer stretcher. I have both. I was first using the medium and just could not get enough strength to stretch as needed. The heavier duty one with the longer (and more rubber-y pads) stretcher was so much simpler (albeit more expensive). Maybe thats what you sell on line. . I already had 3 of the medium duty ones at home from other projects. 3. For Sunbrella fabrics with more stretch: to avoid sagging, cut the fabric a little smaller by 1/8-1/4".... when I used your measurements there was sagging. When I cut smaller more taut, no sagging.... of course that is probably why the stretching was more taxing but it did the trick! Hopefully I am not stressing the fabric out beyond its limitation!!! Time will tell. Would love to attach photos but can't figure out how to do this....
@SailriteDIY
5 жыл бұрын
Wow, those are great suggestions. I can't modify the KZitem video, but I do hope that people read your comments here. You can post your excellent comments and photos on our website here: www.sailrite.com/How-to-Replace-Fabric-on-a-Patio-Sling-Chair (just scroll to the bottom of the page at that link and add your comments and photos to the discussion).
@IamDaytrader
2 жыл бұрын
Great video. Only one I found that is very detailed and clearly addresses removal and installation in a professional manner. Well done thank you.
@raylenehill2550
2 жыл бұрын
Wish I’d watched this before I threw out a good quality, 26 yr old, heavy duty, patio chair. But thanks to this video I can refinish the other 5. Very informative. Wish me luck!! Thanks!!!
@tammykonarski6528
4 жыл бұрын
I wasn’t sure if repair was possible for these chairs. Mine lasted 18 years and I still love the chairs. Thank you for this video and detailed instructions.
@smill3form3lov3
3 жыл бұрын
I have 6 chairs I need to do and omg it looks like so much work
@jeanettedawson8500
11 ай бұрын
Excellent video. Always loved Sailrite products. Your portable industrial sewing machine is amazing.
@computerbuild1447
7 жыл бұрын
Also you can make a point at the end of the spline like a pencil to push it through the sling easy. I have been doing this over 10 years can do a chair in under 15 minutes
@SailriteDIY
7 жыл бұрын
Very, good idea. Thanks!!!
@edchester3150
4 жыл бұрын
I started out looking for a place to recover our four chairs then saw this. Less than $100 for four chairs to look new again. My old spline is solid plastic and pretty rigid after years so if I did not use some WD40 on it I would not have gotten it out without cutting up the old fabric a lot which we wanted as a size double check. The new fabric matches our frame color very closely .
@jonathangoodall3880
4 жыл бұрын
Where did you get new fabric?
@williamjackson5942
Ай бұрын
@@jonathangoodall3880 The links below the video?
@thebeatonpath
6 жыл бұрын
Wish I had seen this BEFORE making and installing my mom's new replacements. That bar spreader tip would have saved me a lot of headaches.
@dianaanthony2981
2 жыл бұрын
Great instructional! I feel confident to sew and install my slings now.
@onehans
Жыл бұрын
I fixed my patio chairs,. The video was a big help, I would not recommend to use a striped material for your first set of chairs, your first chairs are hard, and I didn't want to make sure the strips were straight, my patio set was 15 years old, it looks like new, and should be ready for another 15 years.
@brightideasjones8377
2 жыл бұрын
I have learned a lot from you now I can cover my chairs for this summer thank you
@supernova8962
3 жыл бұрын
This is a great video. I just learn about cheap fabric chairs.
@Wild1BillS
9 ай бұрын
What a Great video. My chairs are almost 24 years ols and the fabric is starting to go now I see what I can do to replce it and make them look like New again.
@SailriteDIY
9 ай бұрын
I'm so glad you found the video helpful! It's amazing how a simple change like replacing the fabric can make your chairs look brand new again. Good luck with your project!
@al68fc11
5 жыл бұрын
EXCELLENT!! I have 4 patio chairs to do and this is the perfect video, thanks!! Placing order for fabric and spline cording today. Gracias!
@SailriteDIY
5 жыл бұрын
Awesome! Thanks for your order!!!
@elaineb3843
4 жыл бұрын
Thanks to the kids who had their own experience for the girls to go home for dinner with
@valeriebell717
3 жыл бұрын
Great great video, I just love your store and these videos are such jewels! Thank you so much you have me as a customer for life!
@kimrockett2833
7 жыл бұрын
fabulous!!! I wonder how many people take their old (Expensive) torn fabric patio furniture and throw it out because they don't realize there is hope for this problem.... we need to measure and order some covers.. Thanks for the Video!
@SailriteDIY
7 жыл бұрын
You are welcome! Glad you liked it.
@lupusk9productions
6 жыл бұрын
i just salvaged two chairs like this from my neighbor who threw them away for that exact reason. wish the fabric came in better sizes though i only need a small amount.
@bft5775
4 жыл бұрын
Thank you, for the video. i watched it ordered the material and watched it again. material came and we did the bottom part of the chaise lounge. Thank you!!
@SailriteDIY
4 жыл бұрын
Excellent!
@tvelazqu1
Жыл бұрын
Love the tips of spraying the sling holders, folding fabric on ends pulling sling & fabric. Little confused on using that spreader bar. I just inserted mine back in as I put back together. But I have 5 to go & still have 2 lounge chairs which Im not looking forward to complete!
@harrynewton6437
2 жыл бұрын
thanks for the video was very helpful saved me having to replace two chairs
@davidlis6709
4 жыл бұрын
I struggled like you pulling the fabric threw the channel for the first chair. I also had to use a pair of players. I took a bar of hand soap and rubbed it on the part of the fabric that goes threw the channel. The soap lubricated the material. All the rest of the 5 chairs went very easy and did not need anything except my hands.
@SailriteDIY
4 жыл бұрын
So glad that you got the job done. Good job!!!
@jayveespencer
8 ай бұрын
I would not recommend that thick fabric if you have a chair that has the two sling rails unseparatable. I had to use two vice grips with lighter fabric. This was a very helpful video. Thank you.
@SailriteDIY
8 ай бұрын
I appreciate your feedback! It's always good to consider the specific requirements of your chair before choosing the fabric. Thanks for watching and I'm glad the video was helpful to you.
@lindaj.hoffmanesquire9498
4 жыл бұрын
Awesome job explaining and demoing. Thank you all!
@SailriteDIY
4 жыл бұрын
Glad you enjoyed it!
@susanmiller9682
3 жыл бұрын
Great instructions! We just did this for 6 chairs and they came out very nice with one exception. The seat area is a bit saggy on a couple of chairs. Does this mean the fabric is a bit too wide? We can't stretch it any more due to the frame but i could make the fabric a bit narrower.
@SailriteDIY
3 жыл бұрын
Yes, the panels may be slightly too wide on those couple of chairs you mentioned. When I have an issue like that (fabric not as tight as I like) it is usually because the tension bars are not pushing against the sides as tightly as they once did. If possible, it is not always possible, try inserting a washer or two between the tension bar ends. This will provide instant tension to the fabric. Or if possible try bending the tension bars to extend the length slightly, that may not be possible depending on the thickness and design of the tension bars.
@MrJonw9
6 жыл бұрын
If installing the sling with the spline, it's good to be sure that about 3 inches of spline extend beyond the sling at the end opposite where you start. Otherwise when you finish the last inch of fabric will have no spline. Also, it helps to use a file and be sure that there are no sharp edges where you start to feed the sling.
@SailriteDIY
6 жыл бұрын
Good suggestions, thanks!!!
@peblum
4 жыл бұрын
I used a dremel tool to take off the sharp edges of the rail for the start.
@danpuchalla6959
3 жыл бұрын
If you have trouble pulling out the spline, it might be because the fabric is too tight around the curves in the frame. I cut the fabric very close to the frame (not down the middle), and then I cut flex points into the fabric about every two inches, i.e a cut perpendicular to the direction of the spline all the way to the frame. That way, the fabric flexes easily with the spline as you remove it.
@KevinBarnett1
2 жыл бұрын
Well I am officially a Dad, watching this most dad of all dad videos.
@SailriteDIY
2 жыл бұрын
Congratulations!
@garthstory7521
7 жыл бұрын
Thank you for taking the time to make this video--it's really helpful. The top of our chair measures 16-3/4", and the bottom is 17.5". I wonder how we should deal with this? It seems too big a difference to use the smaller of the two measurements.
@SailriteDIY
7 жыл бұрын
You are correct. Since the top and bottom measurement are that much different you will need to match the panels shape accounting for that difference at the top and bottom.
@bluerocketgirl46
4 жыл бұрын
Thank you for this vidoe. I just may try it. I have four chairs to do!!!
@SailriteDIY
4 жыл бұрын
You can do it!
@2522eva
2 жыл бұрын
Gratidão 🙏🏽 aprendo muito com seus vídeos🇧🇷🇧🇷🇧🇷🇧🇷
@amydeason2136
4 жыл бұрын
Do you mind telling me what is a good price for this labor? Excellent video. I followed your instructions and chairs turned out great!
@michellebwilson2610
Жыл бұрын
Manufacturing labor in the US Midwest, to contract out, was running at $50/hour pre-pandemic; I’d imagine its closer to $60 now.
@jeankadera6419
Жыл бұрын
Great video, TY. What size needle did you use for this project?
@jeanh.7513
Жыл бұрын
Really nice video! Thank you 🙏
@brendagaw8732
Жыл бұрын
Do I need a special foot for my machine, I have. Brother’s machine. Thanks love the video. Can’t wait to redo my chairs. Brenda
@jeanettedawson8500
11 ай бұрын
I spray some WD-40 and turn the spine the opposite way in the grove or channel before pulling the spine out. This helps to cleans the grime and makes the old spine come out easier. Wipe away excess WD-40 once spine is out.
@realist8082
2 жыл бұрын
This is a fantastic video!
@debscott3948
2 жыл бұрын
Wonderful video. Noticed that I actually purchased (4 or 5 yrs ago) the same fabric that you are using in the demo. I’m having a hard time getting the fabric stretched lengthwise. It wants to bunch up (so to speak) at the curve. Any tips or suggestions?
@laurengrover7563
2 жыл бұрын
Quick question... When you were sewing the sleeves and you marked the 1/2" then 2" on each side and said between the two 2" lines was the final measurement of 20" (which was the measurement of the chair... rail -> rail before disassembling)... Where did the channel measurement go? I completely sewed the fabric for one chair, but I haven't assembled yet and I'm trying to imagine how the measurement of my final width being 20" won't be too short when that was the measurement that didn't include the channel at all. My fabric was too beat up to measure once I cut it off. I'm hoping when I assemble it just magically works but something seems funny to me here. Please please please respond.
@SailriteDIY
2 жыл бұрын
Our chair from rail to rail was 19 3/8" after the sleeve size is added (0.31" x 2 = 0.62") It would then equal 20 inches. So.... I think you are forgetting to add the .31" for the sleeve size. Use this fabric calculator to help: www.fabric-calculator.com/SlingChair/index.html
@reichan4187
Жыл бұрын
@@SailriteDIY I was thinking the same thing as @laurengrover7563. I'm glad you pointed out your final measurement was not 20" and that 20" includes the sleeve size for both ends.
@zobysunday6941
2 жыл бұрын
Great instruction video!
@danieljolla1985
2 ай бұрын
Why not use the original fabric as a pattern ? Also, wouldn't the double sided seam tape you all sell be better for holding seam down while sewing? I have 80 pool side chairs to change out (60 lounge and 20 chairs similar to that chair). I will be ordering fabric from you guys. Great video
@SailriteDIY
Ай бұрын
Thanks for your kind comments and ordering from Sailrite! If you remove it carefully and it is not damaged by age, you can use it as a pattern. Yes, the seamstick would be helpful, just don't get it in the sleeve for the awning/sling cording. www.sailrite.com/Seamstick-1-4-Basting-Tape-for-Canvas-50-Yds
@bryantmatthews9265
3 жыл бұрын
Great video. V helpful. Thank you
@OurBengals
2 жыл бұрын
Great video and good job!
@pamsorensen150
4 жыл бұрын
Great video! So helpful. :D Thanks so much
@chickad5820
2 ай бұрын
If one can't afford this fabric could upholstery outdoor fabric be used? I thought about denim and using naphtha to make it water proof. If it's not in the sun due to a porch cover, would this work? I also thought about patio outdoor fabric and making a weave pattern but the channel itself would be one layer like a border to slide easily through the channels. I'm a seamstress and a quilt maker so I have lots of fabric. Would any of these ideas work? What thread would you recommend with a home sewing machine?
@marthalough5641
3 жыл бұрын
This is a fantastic instructional video. One question though - could you clarify where the second row of stitching goes on the lengthwise edges? It seems like you are saying it goes about a quarter of an inch to the right of the first line of stitching - is that correct? Or could you fortify the first row of stitch by just going over top of it? Thanks in advance for considering this.
@SailriteDIY
3 жыл бұрын
Glad you liked the video! I usually place the second row about a 1/4" from the first. Since the hem is rather large you can place that stitch on either the left or right side of the first stitch. Do not stitch right over the first stitch, that will weaken the fabric since the needle is penetrating it so many times in the same spot, it sort of perforates the fabric.
@marthalough5641
3 жыл бұрын
@@SailriteDIY great, thank you for the guidance!
@jerrywilson4795
5 жыл бұрын
Wow, Quite a job for this old guy with arthritis but great video. If a new chair is cheaper than hiring this done i'll have to go that route ? Thanks
@rominhawk3949
6 жыл бұрын
Excellent presentation; Thank you very much.
@SpiritBear12
7 жыл бұрын
I think rubbing some bar soap, or dish washing soap, or rubbing white candle wax or even Vaseline on the edge of the fabric that's to be slid through the rails will help it slide easier. You can put some liquid soap or Vaseline on a Q-tip and run that through the rails to lube the insides. I'm not sure why you measured the old fabric while it was still on the chair, and then measure it again while it was removed and flat on the floor. I would measure it after it's been removed. That would be much easier and it's more accurate than trying to measure around curves.
@SailriteDIY
7 жыл бұрын
Good suggestions! Why measure the old fabric on the chair prior to removal? Many customers do not want to disassemble the chair prior to ordering the fabric. Measuring in advance to ordering new fabric means they can use the chair up until the date they are ready to sew and assemble the new panels.
@SpiritBear12
7 жыл бұрын
Sailrite That may be so, but, it's a real pain measuring curves esp when you have a floppy measuring tape. You'll get more accurate measuring if you do it while the material is flat. Also, at that point you can see all the hems so you can measure those too and add those measurements to the main ones to get the final size of the fabric.
@gaylemoore7722
4 жыл бұрын
I noticed that when you talk about layout of fabric, you don’t talk about how much extra for seams...don’t I need to add that before I can figure out how to lay it out? My length is 49 1/8...adding in seam allowance is probably going to put me over for the 54” wide...just curious.
@soniabell2141
2 жыл бұрын
What can I use if I don't have a sewing machine to keep the fabric binded
@SailriteDIY
2 жыл бұрын
Well.... I don't think it will work well without a sewing machine. We have not tested, but it may or may not work, to use HH-66 Vinyl Cement to glue Phifertex Plus sleeves in place. If you try using it and it works or not please comment back. I would think that sewing is better than gluing a sleeve, but who knows until it is tested.
@stevenvercruysse5577
6 жыл бұрын
Very clear video,thanks
@amydeason2136
4 жыл бұрын
Another question I just thought of, why do you have to turn under the side 1/2"? Can you just fold it over like you did the top? It won't ravel. It sure would make it easier to begin pulling it through the rail.
@SailriteDIY
4 жыл бұрын
The edge with the sling cording is the edge that will come under a great deal of stress when the occupant sits in the chair. So, creating this half inch fold is kind of important to help reinforce the fabric. The 1/2" fold should not get in the way of the fabric that has to be pulled through the metal channeling, since it is only folded back a half inch. I hope this information helps.
@BR-iq2wm
Жыл бұрын
Great video! How much to have someone do this work for you…For 6 chairs?
@sandywjo5
Жыл бұрын
Just got new slings for 2 lounge chairs. Bottom seat parts both perfect and tight, top part on both is tight enough to use, but very subtle waving and loosness in it. Measured correct and sling tops came correct size. Any way to adjust chair frames even more to tighten it more? I already added a couple thicker washers in one spot where back bars connect to back of seat and that helped maybe 30% but still not great. Is this normal to happen when doing replacements?
@SailriteDIY
Жыл бұрын
Adding washers is always the first thing to try. If that does not work simply remove the fabric which is loose and rip the stitches and make the hem on one side a little larger, which in turn makes the chair tighter from frame to frame since the hem is folded over slightly more. It is that easy!
@StockDude
Жыл бұрын
great video. But don't the manufacturers of these chairs make pre made replacement fabric already cut and stitched so I don't have to go through all this? Asking bc I don't know.
@SailriteDIY
Жыл бұрын
I have not found any manufacture of the chairs selling replacement fabric panels. However, I know of some canvas and upholstery shops that say they can make them for you.
@yolandarates3298
7 жыл бұрын
thank you for the information I willl learn how to replace some than you
@SailriteDIY
7 жыл бұрын
You are welcome!
@mandiehutton
7 ай бұрын
When measuring the width would one need to add the 2” slot on each side along with the 5/16 hem? If one doesn’t add this dimension I would think the measurements would be too narrow and possibly ruin the entire project causing one to need to start over and order more fabric.
@SailriteDIY
7 ай бұрын
At 11:03 min we show calculations for the width (cut size) as follows: Width + (Slot x 2) + 4 = Cut width of fabric. Use the Sailrite Fabric Calculator for Sling Chairs and get it right the first time: www.fabric-calculator.com/SlingChair/index.html
@MariahChan96
3 жыл бұрын
If my fabric ends up being too long after I pull it through the chair do I have to take it out and essential start over??
@marjorierochon8751
Жыл бұрын
Our chairs have 3 side to side bars that are welded to the sides. We don't have stretch bars to remove. Is it still possible for us to get the right stretch? We have 6 chairs and will try one to begin if it is possible.
@SailriteDIY
Жыл бұрын
Ya, I have seen sling chairs where frames are welded together rather than using removable stretcher bars or bars that are screwed together. In those situations it is very difficult to push new sling fabric panels into the grooves of the chair frames. I do not have much advice for a process except to possibly make smaller panels for easier installation. The manufacture was not thinking about replacing the fabric, but instead wants you to buy new chairs when the fabric wears out. I try to avoid buying sling chairs that are welded together to avoid that issue. I did see a youtube video (can't find it now) of someone installing slings to this kind of lounger, but they used 2 large clamps to bring the side rails closer together, slightly bending the already curved stretcher bars. Then after getting the fabric in place I would lay the chair frame on a flat surface and apply pressure to the welded tension bar (probably by standing on them or using some of my body weight) bending the bars back to original shape to tension the fabric.
@fergferguson7370
Жыл бұрын
Wow after watching this excellent video I decided to buy some new chairs..
@gcoxjr
Жыл бұрын
You mentioned at the beginning of the video that you had a source for replacement end-caps would you please post the link.
@SailriteDIY
Жыл бұрын
We do not sell end caps for sling chairs, but I have found this website which may help you find the correct end cap for your chairs: www.patioproducts.com/slinginserts.asp
@tammymeier9157
2 жыл бұрын
Thanks!
@sadiemathison3892
2 жыл бұрын
I realize this is an old video, but what size spline did you use? My old spline is neither of the sizes carried by Sailrite. Is it possible it shrank?
@SailriteDIY
2 жыл бұрын
The spline for most chairs is 1/4" in size. No, the spline should not shrink in time.
@bettyescookingchannel
4 жыл бұрын
Thanks
@gregoryvanek9038
4 жыл бұрын
Well done
@karenmcjunkin172
Жыл бұрын
My fabric is puckered where it the chair curves most. I’ve pulled and pulled from both ends. I reused the chord form my old chair. Everything else is just like in the video.
@fmesj
3 жыл бұрын
is there any ready made to purchase of any size of the chair? how many yards of fabric in one chair.
@SailriteDIY
3 жыл бұрын
You can use this calculator to figure how many yards you need. In most cases 1.33 yards will complete two sling chairs.
@BigSur16
5 жыл бұрын
what kind of thread to use for home sewing machine and 15-16oz fabric???
@SailriteDIY
5 жыл бұрын
A home sewing machine usually cannot handle any thread larger than a V-69 Polyester, so that is what I would recommend. However, if your machine could handle a V-92 Polyester that is what I would want to use.
@athenaglasby7831
3 жыл бұрын
@@SailriteDIY How can one find out if it can handle V-92 thread. I have a Bernina 445 if that helps any. Also if it can't handle V-92 to you suggest a more reinforces straight stitch or still use a normal straight stitch?
@SailriteDIY
3 жыл бұрын
@@athenaglasby7831 A Bernina 445 is considered to be a home sewing machine. I don't think it will be able to tension a V-92 thread. So instead get V-69 Polyester thread. Just use a normal straight stitch.
@SailriteDIY
3 жыл бұрын
@@athenaglasby7831 It, Bernina 445, will not be able to handle the tension of V-92 thread, sorry. I would expect it to handle V-69 Polyester easily. Use a normal straight stitch.
@gaile2241
7 жыл бұрын
great video
@SailriteDIY
7 жыл бұрын
We are glad you liked it. Let us know if you have any questions.
@cathywarwaruk1907
6 жыл бұрын
can you please give me the name of a person that covers them in the monterergie region
@bcoliver8
6 жыл бұрын
Cathy Warwaruk ;(67(
@itsgoingtobeok-justbreathe4808
2 жыл бұрын
maybe i missed something, but is there any reason why you don't slide out the old fabric and then measure it, rather than measuring with it slid in the frame already?
@SailriteDIY
2 жыл бұрын
That can be done, if your old fabric is in good shape and not stretched.
@monicagibbs2190
Жыл бұрын
Soo what type of thread should be used?
@SailriteDIY
Жыл бұрын
We usually consider two types of thread for outdoor projects: Polyester thread or PTFE thread. Sailrite carries two brands of PTFE thread: Sailrite Lifetime Thread (formally called Profilen PTFE) and Tenara PTFE. The PTFE threads will last the life time of the fabric no matter the climate they are used in and they are chemical resistant and fade proof. However, PTFE threads are more costly and slightly more difficult to sew with. Sailrite Lifetime Thread PTFE sews easier than Tenara brand PTFE threads on an oscillating hook sewing machine (like what the Sailrite Ultrafeed uses). Both sew wonderfully in a rotary hook sewing machine. Most customers pick Polyester thread because it is less expensive and easy to sew with. A Polyester thread is UV resistant, but its life is totally dependent on the amount of UV (and other outdoor elements) it is exposed to. If used in the Midwest a Polyester thread may last 5 to 10 years if used in the tropics or desert it may last only a few years. If you purchase Polyester thread the best fade resistant colors are Black and White, they are solution dyed (colors run all the way through the thread) the other colors of Polyester threads are only coated on the surface and will fade faster.
@dejakjoller6569
Жыл бұрын
Why do you need the 1/2 hem on the sides?
@SailriteDIY
Жыл бұрын
The half inch hem finishes off the raw edge of the fabric adding both a better looking edge and also a little more strength for the sleeve.
@nancytaugher7962
6 жыл бұрын
Is the bar-clamp/spreader used in the video a "heavy duty" 24" spreader (600 lb max), or is it a regular 24" inch (300 lb max) spreader? I plan to buy one, since all my chair slings are wearing out at the same time and I can do everything except reattach the spreader bars.
@SailriteDIY
6 жыл бұрын
In this video we used the Irwin Quick-grip one handed bar clamp "heavy duty" 36" (Irwin part #1964715) which is rated for up to 600 lbs. We do not need the 36" length a 24" length is sufficient. Also a 300 lbs. rating would also work.
@ellenmartin5885
4 жыл бұрын
Can you rent one instead of buying one?
@peblum
4 жыл бұрын
I just did my 3 chairs which had an extra curve at the bottom of the chair. The Irwin heavy duty bar spreader(600 lbs max) wasn't strong enough. I ended up trying a bottle jack(HFT) with 4x4 wood block to stretch the sling frame. It was a very controlled high pressure stretch. My chairs fought me every step of the way. The bottle jack made stretching easy. Pledge spray helped loosen the sling material for removal. Vaseline helped during sling installation. I am not sure if Vaseline is compatible with the chemical properties of the sling material but it sure helped during installation.
@pbrenneraz
4 жыл бұрын
@@peblum Can you share which exact jack you used? The Irwin spreader didn't work for me either, and I can't bend the spreader bars at all.
@peblum
4 жыл бұрын
@@pbrenneraz Harbor Freight Tools Item69472 4 Ton Heavy Duty Hydraulic Bottle Jack. I had to add oil to the jack to get it to work after purchase before first use. Jack is about 7.5 inches tall and very cheap with coupon.
@melrufrano
4 жыл бұрын
Can I use the old spline that I remove from the chair and sew it into the new fabric? Just trying to save some money.
@SailriteDIY
4 жыл бұрын
Yes you can. If it is still in good shape use it.
@bertosantos9699
5 жыл бұрын
Can the fabric be pre ordered with the measurements already cut AND the edges already sewn for easy installation for those who don't have a sewing machine?
@SailriteDIY
5 жыл бұрын
Hi Berto, That is not something we do, but you can order the fabric and find an upholstery shop to cut and sew it for you.
@bertosantos9699
5 жыл бұрын
@@SailriteDIY Maybe there's an opportunity there for the company to make some more money! I'll take a percentage for the idea. Lol. Anyway, thanks for replying.
@anitagarvey465
2 жыл бұрын
@@bertosantos9699 $60+ each sling from Hampton Bay
@chuckdeless9891
2 жыл бұрын
dont have a sewin machine. maybe a stapler will work?
@SailriteDIY
2 жыл бұрын
Hi Chuck, We would not recommend a stapler, it most likely will not hold up.
@karenanderson6360
2 жыл бұрын
Can you buy this pre finished?
@SailriteDIY
2 жыл бұрын
No, sorry. We only supply the tools and fabric for DIY.
@ellenmartin5885
4 жыл бұрын
Where can I buy the cording? I have a few pieces that have broken. I cannot find it on the sailrite site
@SailriteDIY
4 жыл бұрын
Here is a link for the sling cording: www.sailrite.com/search?keywords=sling%20cording
@shawnriordan3004
5 ай бұрын
My sling chairs have one tension bar at the bottom that is welded on!!?
@SailriteDIY
5 ай бұрын
So... the chairs have tension bars, except they are welded in place. If so, I have not replaced the fabric on a frame like that, so I may not be able to offer good advice, but I will try. I have seen sling chairs where frames are welded together rather than using removable stretcher bars or bars that are screwed together. In those situations, it is very difficult to push new sling fabric panels into the grooves of the chair frames. The manufacturer was not thinking about replacing the fabric, but instead may just want you to buy new chairs when the fabric wears out. I did see a youtube video (not our video ): kzitem.info/news/bejne/p22JrJ-pbYuad4Y of someone installing slings to a lounger with welded bars, but they used 2 large clamps to bring the side rails closer together, slightly bending the already curved welded stretcher bars. Then after getting the fabric in place, if it were not as tight, I would lay the chair frame on a flat surface and apply pressure to the welded tension bar (by standing on them or using some body weight) bending the bars back to original shape to tension the fabric. For your chairs I would try this..... If the front and middle tension bars can be removed then you still may be able to slide a finished new sling fabric panel into place. Yes, it may be very difficult to slide the new fabric panel into the groves, especially at the top. Use a lubrication (I love to use McLube Sailkote or WD-40 or petroleum jelly) and spray or coat the groove of the rail. Even pushing a rag soaked or coated with the lubrication through the groove before inserting the fabric can help. Then use a pair of vise grips (with scrap fabric, doubled up) over the plier’s teeth to protect the fabric, and pull the fabric panel into the grooves carefully. A second person can help hold the rails as you pull the fabric with the vise grips.
@shawnriordan3004
5 ай бұрын
@@SailriteDIY thank you so much for your reply- only one of the tension bars is welded so I’m gonna try 😊
@karens6053
4 жыл бұрын
What fabric choice and color or id was used in this video?
@SailriteDIY
4 жыл бұрын
Here is the fabric that was used in this video: www.sailrite.com/Phifertex-Vinyl-Sling-Sisal-Aloe-54-Fabric
Пікірлер: 222