Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ic/1ABCR00461
This video shows you how to install a front brake caliper on your 2007-2013 Acura MDX. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX
Tools you will need:
• 17mm Wrench 1aau.to/oKd/1AXAA00010
• 19mm Wrench 1aau.to/oKd/1AXAA00010
• 10mm Socket 1aau.to/oaJj/1AXAA00017
• 14mm Socket 1aau.to/oaZh/1AXAA00015
• 22mm Socket 1aau.to/oki/1AXAA00266
• Brake Caliper Hanger 1aau.to/oga/1AXAA00084
• 1/2 Inch Air Impact Gun 1aau.to/oni/1AXAA00252
• Ratchet 1aau.to/obdh/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oaZh/1AXAA00015
• Torque Wrench 1aau.to/oajh/1AXAA00044
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Gloves 1aau.to/ows/1AXSS00048
• Safety Glasses 1aau.to/oq6/1AXAA00343
• Drain Pan 1aau.to/osT/1AXAA00320
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Негізгі бет Автокөліктер мен көлік құралдары How to Replace Front Brake Caliper 2007-2013 Acura MDX
Пікірлер: 4