Thanks I'm only 14 and I just did this for my grandma's car it was so simple
@ljmccray5324
10 ай бұрын
Lmao it Is simple but u run into lil road blocks nothin goes as plans lol
@RasputinKechenko
6 ай бұрын
@@ljmccray5324Don't be hatinnnn
@HhhGggg-rz7bu
4 ай бұрын
Who bought the parts and tools?
@rocquegartland1905
Ай бұрын
Good job
@Jimmy-hc8sf
24 күн бұрын
Grandma still alive?
@sammer021486
2 ай бұрын
Great video, I am about to do my brakes for the first time on a 2020 pathfinder. I did notice though that you referenced the Newton meter for the torque specs. General Information page 5, lists white wrench as N.m (kg-m, ft-lb), black wrench N.m (kg-m, in-lb). Front bolts white wrench for all bolts, 17mm bolts 45.6 N.m (4.7 kg-m, 34 ft-lb), 22mm bolts there are two styles, bolt with flange 123 N.m (13 kg-m, 91 ft-lb), 22mm bolt with washers 144.5 N.m (15kg-m, 107 ft-lb). Rear white wrench for all bolts, 14mm bolts 43.15 N.m (4.4 kg-m, 32 ft-lb), 19mm bolts 84.3 N.m (8.6 kg-m, 62 ft-lb).
@jamesrichardson771
4 ай бұрын
Nice job💥-- Man those calipers really look good in that "golden orange" color !!
@edhazzlerigg8661
10 ай бұрын
Very thorough. Nice job!
@jordanceliano
8 ай бұрын
Amazing video thanks
@Leroy-h9f
9 ай бұрын
Great instruction, you have video on broken lugnut stud?
@dial2fast
9 ай бұрын
Sorry no video on removing broken lugnuts.
@CarlosRodriguez-qt2qb
5 ай бұрын
Profecinal gracias
@taylorfamily2x380
Жыл бұрын
Awesome video
@sweetdonutluckywolf6252
4 ай бұрын
Good video very informative Thank you
@RasputinKechenko
6 ай бұрын
Which cordless impact are you using ?
@dial2fast
6 ай бұрын
It's a Ryobi P261 18V impact. They have newer one with brushless motor. Works great and plenty of torque.
@spins8085
Жыл бұрын
Awesome video thanks
@US37mmGunner
Жыл бұрын
I have finally found the PERFECT guide for an auto repair! The video is clear and the explanation is easy to understand! Thank You!!!
@NashvillePastaman
3 күн бұрын
Thanks for the vid- my wife just lost her job so I’m gonna do this break job and save a couple hundred bucks-even though we have a lifetime alignment and brake pad with Firestone-I’m gonna follow your video and clean and grease all of the calipers….. then I’ll have them check the brakes and do the alignment to Make sure I didn’t screw anything up.
@JohnnyHarbeson
Жыл бұрын
are you sure about the torque spec on the 17mm because I was looking at the service diagram and it says 45.6 N-m (4.7kg-m, 34ft-lb)
@dial2fast
Жыл бұрын
You are correct about the ft-lb value. I misread the service manual. Thanks for mentioning it.
@jeffkezerian4169
Жыл бұрын
Perfect, as always. You have given me so much confidence to do these jobs myself. You've saved me thousands! 💙
@DakhilB
3 ай бұрын
Don't Follow The Torque Value He Gives You... Way Off...
@sagekim7143
2 ай бұрын
Where did you get the bronze calipers? Did you paint them? Owned many pathfinders ('96 SE, '01 LE, '05 LE, '13SL which was my last one in 2015) many years ago. I moved since then to mustangs, but recently got a 2017 Pathfinder SL for my son and i am excited to be wrenching on an R52. I did the CVT service after seeing your videos. The rear caliper was seized and fronts i had to rebuild, so seeing your bronze calipers, i am wondering where you got them?
@dial2fast
2 ай бұрын
I painted them. Here is the vid: kzitem.info/news/bejne/qYaY3XiirquanHo
@teddyhernandez7259
8 ай бұрын
You are a good men to do this for person to wan to lerning to do that you
@navarrowmariscal4387
9 ай бұрын
Such great detail in this video for a simple front brake job!! I really enjoyed it, amazing video.
@eli4nations
6 ай бұрын
My man, thank you so much! I was having such a hard time understanding those abutment brackets 😅
@erichappyvideo6691
Жыл бұрын
Do you have the video of Nissan pathfinder power steering flush? if you have a chance kindly do the video as well
@rubensimerman2043
Жыл бұрын
More videos of Honda odyssey please!!
@shreddininfla
Жыл бұрын
Nice video however when looking at the torques for the bolts in the nissan manual they are in metric and need to be converted to foot pounds
@Mexicoallstar
5 ай бұрын
Thanks for the upload
@MrMikej
11 ай бұрын
whats are the torqu specs for the calipers
@NorwoKamure
7 ай бұрын
Thank you for making this video
@GraemeDumbrell
Ай бұрын
Very good, informative video
@deangatlin7111
11 ай бұрын
Very good
@brianfreeh8247
Жыл бұрын
Fantastic video!
@ResterRegencia
Ай бұрын
now i have confidence doing my 2015 Pathfinder thanks a lot!
@blakebuyshouses401
Жыл бұрын
How big is the socket for the Lugnuts?
@dial2fast
Жыл бұрын
21mm
@Dogpound819
7 ай бұрын
Very well done!
@dial2fast
7 ай бұрын
Thank you! Cheers!
@marvvalens4522
Жыл бұрын
Hey, I have a 2020 Pathfinder consuming gas like crazy, getiing 15 mpg. Also, when i fill up the tank the miles vary every time. Any clue what it could be?
@claygerard-ys1hi
5 ай бұрын
Maybe try fuel injector cleaner, or using supreme gas. Or check the pcv valve
@fryadahmed
Жыл бұрын
Changing the rotors wasn't really necessary. Was there any reason for changing them but you didn't talk about it in the video? I would rather keep the original ones on.
@dial2fast
Жыл бұрын
Whenever you change the brake pads, you either machine the old rotors so you have a new flat smooth surface for the brake pads to bed in, OR you replace the rotors. These days with rotors being relatively inexpensive, you should just replace them. Most automotive stores don't even offer rotor machine service anymore. If they do, it will cost you $20-$30 for the service. If you just throw new pads on these old rotors, you will have braking problems like brake vibration, or bad braking (very dangerous).
Пікірлер: 47