Great video, precise and to the point! Used it this morning to add copper grease to stop brake squeal. Just to add it's a 14mm spanner.
@TEAMR4ULTV
2 ай бұрын
Thanks for watching really appreciate it
@rahulkapila1204
3 жыл бұрын
Thanks so for making this video . I pitted new break pads for my wife’s car .
@luluh2019
2 жыл бұрын
Thanks for the vid. What are the torque settings for the brake calliper and brake bracket?
@TEAMR4ULTV
2 жыл бұрын
Al be honest I just do them tight as posible
@SandySuit
4 ай бұрын
Caliper mount: 65-75ftlbs Caliper (small bolts that go into the pins): 20-30ftlbs
@calvingifford9442
3 жыл бұрын
Good video! I personally would remove the spacers, cleaned & greased them up but maybe for the newer vehicles it is not necessary, along with 'roughing up' the pads with sandpaper?
@TEAMR4ULTV
3 жыл бұрын
To be honest you should do that,sliders should be nice and free cant remember if I mention it or not anyway thanks for watching
@SandySuit
4 ай бұрын
Not sandpaper unless it’s a high grit. Honestly would recommend a scotch brite pad instead. Or brake cleaner and a microfiber. No need to remove and metal just cleaning grease.
@taichihead42
3 жыл бұрын
Would you un screw the bleed nipple before compressing the pison on cars with abs
@TEAMR4ULTV
3 жыл бұрын
Sorry for late reply, no dont unscrew the bleed nipple just undo the brake fluid reservoir cap and compress the caliper piston hope that helps
@taichihead42
3 жыл бұрын
@@TEAMR4ULTV It does and that's exactly what I did. It's my first brake job, I was nervous but I did it and all's well. My car now brakes like a track car.
Пікірлер: 19