Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ic/1ASB...
New Ball Joint Set from 1AAuto.com 1aau.to/ia/1ASF...
This video shows you how to install new front lower ball joints from TRQ on your 1994-2004 Ford Mustang. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This repair was done on a 2003 Ford Mustang Base 3.8L Convertible 2-Door RWD Automatic and the process should be similar on the following vehicles:
1994 Ford Mustang
1995 Ford Mustang
1996 Ford Mustang
1997 Ford Mustang
1998 Ford Mustang
1999 Ford Mustang
2000 Ford Mustang
2001 Ford Mustang
2002 Ford Mustang
2003 Ford Mustang
2004 Ford Mustang
Tools you will need:
• Pry Bar 1aau.to/o5e/1AX...
• 21mm wrench
• 15mm Socket 1aau.to/obVI/1A...
• 18mm Socket
• 19mm Socket
• Ball Joint Press
• Brake Caliper Hanger 1aau.to/omk/1AX...
• Trim Tool Set 1aau.to/oarj/1A...
• Pliers
• Wire Cutters
• 15/16 Inch Socket
• E8 Inverted Torx Socket
• Ratchet 1aau.to/obYN/1A...
• Socket Extensions 1aau.to/obVI/1A...
• Torque Wrench 1aau.to/oa3i/1A...
• Copper Anti-Seize
• Gloves 1aau.to/oaNk/1A...
• Safety Glasses
• Floor Jack 1aau.to/oaqo/1A...
• Hammer
• Jack Stands 1aau.to/oacC/1A...
• Pick 1aau.to/oX6/1AX...
• Pole Jack
• Wheel Chocks
• Wire Brush 1aau.to/owN/1AX...
Subscribe: / @trq
Check out our playlist:
Ford Mustang 4th Generation 1994-2004: • Ford Mustang 4th Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Негізгі бет How to Replace Front Lower Ball Joints 1994-2004 Ford Mustang
No video
Пікірлер: 3