Buy Now!
New Wheel Bearing & Hub Kit from 1AAuto.com 1aau.to/ia/1ASHF00486
This video shows you how to install a front wheel bearing & hub on your 2003-2007 Toyota Corolla. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obeb/1AXAA00013
• Pry Bar 1aau.to/oP5/1AXAA00020
• 19mm Wrench 1aau.to/oSo/1AXAA00010
• 17mm Socket 1aau.to/objM/1AXAA00015
• 19mm Socket 1aau.to/oabo/1AXAA00043
• 21mm Socket 1aau.to/oabo/1AXAA00043
• 30mm 12-Point Socket 1aau.to/oaa/1AAST00002
• Press
• Pliers
• Snap Ring Pliers
• 1/2 Inch Impact Gun 1aau.to/oqV/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench 1aau.to/oaxA/1AXAA00044
• Gloves 1aau.to/oR5/1AXSS00048
• Safety Glasses 1aau.to/oKp/1AXAA00343
• Floor Jack 1aau.to/oXU/1AXAA00068
• Hammer 1aau.to/oRj/1AXAA00091
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Негізгі бет Автокөліктер мен көлік құралдары How to Replace Front Wheel Bearing & Hub 2003-2007 Toyota Corolla
Пікірлер: 53