Man I wish I came across this the first time. There were no videos. I took my whole front apart grill and all.
@drizler
3 ай бұрын
I have one to change on mine and saw that other one, screw dat! Thats the same degree of hassle as replacing the front bumper cover on my wife’s car after she clocked a suicide buck at 55 MPH. This way is so much easier than taking off the entire grill all the way to the radiator👌🏻
@valdiereynolds6444
Жыл бұрын
Thank you Roadside guy. May the blessings of a thousand Kings be yours...wherever you may roam.
@kennethbrown1879
Жыл бұрын
Just turn the tire inward with the steering wheel. That gives you all the clearance you need. 5 minute or less is all it takes to change the bulb.
@roadsideguy5902
Жыл бұрын
Yeah, thanks. I said that in the video. I also said it's easier for me to pull off because I have a floor jack and an impact, and I change tires for a living. The average person wouldn't want to do that, I said. Thanks for watching.
@welltheregoestheneighborho8584
26 күн бұрын
Thanks man. $128 an hour for labor they told me. I need to charge more money as a mason.
@chrishearron4669
Жыл бұрын
This is way better than the others on KZitem where that have you taking about 30 parts out and coming in from the front. Make sure and take the wheel off.
@sk8r4life92188
3 ай бұрын
I miss my ram 1500. They include access doors so you don’t have to remove any of the wheel well.
@ipodboy2015
2 жыл бұрын
Watching this has me missing the simplicity of my 06 Silverado headlights compared to what all I'm about to go through on my 2019 tomorrow
@jeremiahjohnson7919
Жыл бұрын
For real! We used to just pull up the pins and out pops the light!
@drizler
3 ай бұрын
I think it’s purposely made like this to get more 💰 flowing to the stealerships.
@mercado20083
2 жыл бұрын
Thank you for the video saved me a lot of time
@garretburleson8230
Жыл бұрын
Great video! Thank you brother. You saved me a ton of time screwing around on my own. I appreciate ya!
@arkadyberezovsky1705
2 жыл бұрын
thanks for the video, makes me decide to go to service for this :)))…
@nathangoffiii7718
25 күн бұрын
This was a P.I.T.A. If I do it again… imma take wheel off like u said
@VanNiemela
Жыл бұрын
Worked great thank you! Just had to remove one more fender screw near the top.
@eliteefficiencypros6401
Жыл бұрын
I didn't think I could hate my Ford any more
@mrzachduzan
5 ай бұрын
Do NOT take your wheel off. Just turn your tire in the direction you're working and it opens the whole area up.
@roadsideguy5902
5 ай бұрын
Yeah I said in the video that you don't have to take your wheel off. The only reason I took it off is because I have a floor jack and an impact and I change tires all day so to me it's very easy and it gave the viewer a better view of what I was doing. Thanks for watching and commenting.
@LifeTries_STEVE
2 жыл бұрын
I got to take off a whole tire to replace just the bulb good God I do have all the tools but my old cry eas a pop the hood and pop the new one in style ford is not playing with us anymore trying there best to send us to the dealership
@TheReaperCNF
Жыл бұрын
Thank you. This helped a lot.
@roadsideguy5902
Жыл бұрын
Glad it helped! Thanks for watching and commenting. Much appreciated.
@Christopher-so4dn
Жыл бұрын
What. The fuck. Is this bullshit. Why did they make it so complicated to replace. A fucking. Headlamp.
@roadsideguy5902
Жыл бұрын
Exactly!
@Christopher-so4dn
Жыл бұрын
@@roadsideguy5902 and how many people have a 5.5 mm driver!? Not me! So either I buy a special nut driver, use a pair of pliers, or pay ford service to do it for me. I wonder which one does ford wants me to choose 🤔
@MrCdog12323
Жыл бұрын
What a pain in the ass to change a headlight
@roadsideguy5902
Жыл бұрын
Yes it is! Thanks for watching.
@david37203
2 күн бұрын
Thank you
@timmymalbrough9100
2 жыл бұрын
Had me watch this thinkin wtf...lol I ended up jus removing the tube to the air breather to get to it
@wendyh4083
Жыл бұрын
Watching this is helpful but just goes to show how human's have managed to complicate the simplest things. Seems way over the top for Ford to make this such a pain in the ass!
@CJG-bk4bk
2 жыл бұрын
I miss my 85 Suburban.
@roadsideguy5902
2 жыл бұрын
I just changed a flat on a mint 87
@TheDac12046
4 ай бұрын
Did you put the rubber cover back on the back if the bulb
@THEVROD64
2 жыл бұрын
Thank You !
@timothycraig2206
Жыл бұрын
Thanks for sharing, I had no clue. I didn't have to Jack the truck and take the tire off though.
@roadsideguy5902
Жыл бұрын
Thanks for watching and commenting. Much appreciated. Yeah I didn't either but I change tires for a living and can do it pretty quickly so I figured it helped my neck a little by doing so. Not needed, but if easy to do it may help. Thanks again for commenting. Take care.
@timothycraig2206
Жыл бұрын
@@roadsideguy5902 , it still wasn't bad. Took me about 20 minutes or so. Thanks again.
@mattmichniuk2727
Жыл бұрын
Am I the only one who sees the idiocy in all this,jacking up vehicles, taking off tires wtf is going on here?This is why the big auto guys are failing???
@roadsideguy5902
Жыл бұрын
Like I said in the video, you don't have to remove the wheel. I just did that because it's easy for me. I change tires for a living. I have a floor jack and an impact. Took me like 60 seconds to take the wheel off, and it gave me more room. It's not necessary at all, but it's definitely convenient. Thanks for watching.
@MrKenf60
2 ай бұрын
Taillights are sooo easy,headlights are a pain in the ass !🤬
@roadsideguy5902
2 жыл бұрын
Tell me about your experience trying to change this headlight or find information on how to change this headlight. Do you think Ford makes it easy or complicated?
@arkadyberezovsky1705
2 жыл бұрын
its crazy… lol. thanks for the video, went to service for this.
@fierceeagle2003
Жыл бұрын
All that to change a build?? You sir guaranteed me to never buy a Ford newer truck.
@InCloseFighter
2 жыл бұрын
What model bulb did you get? I say Sylvania I think it was, but what was your model number? Mine went out today and I'm going to have to do this.
@roadsideguy5902
2 жыл бұрын
Not sure I think it was Sylvania. Thanks for watching.
@LifeTries_STEVE
2 жыл бұрын
My low beams went out last night after watching this idk if ima even fool with it today. jesus all this labor for a bulb screw lol
@bobbysealejunior6590
Жыл бұрын
I just picked up a bulb from OReilly and watched this. I can’t believe Ford makes you go through all this to change a headlamp bulb. Tf.
@johnadams8082
5 ай бұрын
@@bobbysealejunior6590it takes 5 min per side lol don't remove the tire it's simply not necessary. Plenty of room without doing that
@tundradude4894
Жыл бұрын
All you gotta do is pull back the plastic fender well on each side,reach up and remove each bulb.Why all the extra labor in this?
@roadsideguy5902
Жыл бұрын
Cause as I said taking a tire off to me is nothing. Takes me one minute.
@Bustercherri
2 жыл бұрын
I should have just kept my 13 🤦♂️
@GamerDad1987
11 ай бұрын
I like Ford vehicles in general, but this is stupid design. Should be able to access the headlights from the engine bay wothout having to remove anything. I get design trade-offs have to be made sometimes, but its surprising how many vehicles screw up changing lightbulbs
@ronnieb3936
2 ай бұрын
This is fucking ridiculous for a headlight 😂
@robertfreese4356
8 ай бұрын
Going through all that just to change a headlight bulb... come on ford. Do better
@user-ie6mm4ni6p
9 ай бұрын
You absolutely do not have to take the wheel off you have absolutely plenty room taking just 3 screws out it’s less than 5 minute job.. this guy may work at ford
@roadsideguy5902
9 ай бұрын
I said that. I said you don't have to take the wheel off! I said I'm only doing it because it's easier for me because I'm not fat and lazy and I have a jack and impact and taking a wheel off to me was easier. Now of course I know a person doesn't need to or have to take the wheel off. That's why I said so in the video, but thanks for saying it again in comment format so those who don't listen can read.
Пікірлер: 62