√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@andrewstambaugh8030
Жыл бұрын
*You can change the driver side headlight bulbs without pulling the bumper cover and headlight assembly.* You just have to swear a lot at the frustrating spring lever mechanism and have a really good pair of pliers. Pull the cover off your fuses just to get a little more room.
@gavinlee5933
2 жыл бұрын
Great video guys, extremely helpful. Got the job done in less than two hours start to finish with no idea what I was doing in the first place 🤘🍺
@josephgendill4091
4 жыл бұрын
Wow. Not even my VW GTI was this complicated to just replace a freaking head light. 🤯
@KitinNO
9 жыл бұрын
This was great! Very detailed. I think I will need a bit of help on this. An exploded diagram would be extremely helpful to keep track of the screw placement.
@MrJLewis59
Жыл бұрын
Great video! Whole time I was doing this I was thinking why so much effort to change a headlight bulb? I love the Mazda but dang what a pain!
@jefffrench1981
11 жыл бұрын
Thanks - that was helpful. Luckily it was my right headlight and I didn't have to remove the whole bumper, but now I'll know when/if I need to replace the other side.
@XVTPR
2 жыл бұрын
Thanks a lot for this video. I've been able to change all of the lights. Blessings and keep up the videos.
@rictaleagle
10 жыл бұрын
Thanks a ton! You saved me a lot of $$$ !! People like you are so wonderful.
@MaxPower-ws7ei
11 жыл бұрын
Thanks for the upload. I could have used this video a year ago. My right headlamp was out on my 07 Mazdaspeed 3 and I needed to remove the bumper. It turned out I needed a ballast replaced and not the HID bulb itself.
@matrodmedia
7 жыл бұрын
I know this comment is 3 years old so this reply is not neccesarily intended for the original poster; it's mainly for anyone like me who is just googling how to do this. This comment above is a decent reason why it may be a good idea (when replacing bulbs), to consider just upgrading/swapping out the entire HID set for a new set, with brand new ballasts, harnesses and such. You can even change the color temperature if you wish.
@Thunderstorm9667
4 жыл бұрын
Did you happen to have the clips in the middle of the bumper like it shows on this video? Can't seem to find out how to remove after getting all the clips and bolts off!
@andrewduggins4132
9 жыл бұрын
You don't have to remove the bumper on the 2006 mazda 3's to replace a headlight bulb on either side. I would know because i just replaced both the high beam and low beam without having to remove anything but the battery cover.
@1AAuto
9 жыл бұрын
We were replacing the entire unit in this video. However it is not always necessary to remove the entire housing if you are doing the bulb only. Thank you for watching! 1aauto.com 888-844-3393
@andrewduggins4132
9 жыл бұрын
O ok i was like remove a bumper to change a headlight who came up with that design haha
@zxbaby
9 жыл бұрын
Hey man, can you give me a mini guide on how to just replace the bulb on the driver side? It would be really appreciated! :D
@archie977
9 жыл бұрын
Andrew Duggins the main bulb is extreemly difficult it seams that the desighn is very impractical for replacement. thank you for posting.
@gg55592
9 жыл бұрын
If you have the factory Xenon/HiD headlights, it's impossible to access the bulb for the low beam from under the hood on the passanger side. With the regular halogen headlights, it looks like there is more room. @1A Auto Parts. Thanks for the video! I was stymied and could not figure out how the bulb could possibly be replaced.
@jameslamev
2 жыл бұрын
Very good information and well presented
@ninsiimaronald6458
2 жыл бұрын
thats dismantling the entire bumper, am selling MY MAZDA NOW
@christopherwu7385
5 жыл бұрын
Do you sell headlight assemblies for those of us with the Xenon/HID OEM Headlights?
@Lilx0N3
6 жыл бұрын
Very helpful! Thank you so much 😊
@1AAuto
6 жыл бұрын
+Mireya Elizondo Thanks for checking us out. 1aauto.com
@christopherwu7385
5 жыл бұрын
are the headlight assemblies for HID the same? or do I need to purchase a different set?
@PFanat-xj6mi
3 жыл бұрын
Um is there a vid on a good cliff to drive the car off of? THATS WAY TOO MUCH WORK TO CHANGE A BULB
@LoveMyCountryAussie
10 жыл бұрын
Thanks mate money saver
@1AAuto
10 жыл бұрын
Thank you for watching! 888-844-3393
@BoroZGB2008
6 жыл бұрын
This mazda is without position lights?
@asapsoon7
11 ай бұрын
they made it very difficult
@BoroZGB2008
6 жыл бұрын
is there any difference in removing the bumper on mazda 3 2006 5 door?
@1AAuto
6 жыл бұрын
+Boro ZG It should be a similar procedure on that vehicle. Hope this helps you out. 1aauto.com
@BoroZGB2008
6 жыл бұрын
I just replaced headlights. Clips in the bumper are pretty difficult to reach since they are not in the same place like on 4 door.
@ComfortableFetus
5 жыл бұрын
i'm sure glad I didn't do my left one myself the other week, i don't have a jackstand or a lift so pulling the bumper off is a bit er well *not fun*
@ComfortableFetus
5 жыл бұрын
Update: right headlight went out, nigh impossible to move the wire to get the bulb out
@ianhillman4007
3 жыл бұрын
Can you not just replace the clear front plastic cover that has glazed up over the years???
@Mickeystyles1
10 жыл бұрын
Is it the same way with the 2010 mazda3?
@1AAuto
10 жыл бұрын
It may be a different procedure. We currently do not have an auto repair video with this particular repair. You may be able to reach around the back of the headlight to remove the headlight bulb. 1aauto.com 888-844-3393
@Mickeystyles1
10 жыл бұрын
ok,thanks for the reply
@vince_only_way_is_up
4 жыл бұрын
2 HOUR job should be 20 MIN JOB !!!
@1AAuto
4 жыл бұрын
+Vinnie T Thanks for checking us out! 1AAuto.com
@maniaque37
3 жыл бұрын
oops i just wanted the bulb replacement lol
@kylenicholson8392
Жыл бұрын
Smh
@k1llshot
18 күн бұрын
God I regret buying this car for my son. Everything is hard to work on. Toyota, I will never stray from you again!
Пікірлер: 46