Much appreciated Lucas. I only need to replace the thermostat housing gasket and you explained in very good detail how to get there with clear close up shots , thankyou .
@ashermergard5795
Жыл бұрын
Thank you, very detailed video, helped me out heaps!
@antoniopetra6983
Жыл бұрын
Thanks pal, gem of a video.
@alexwinterz
Күн бұрын
Make sure your top bolt goes back through the bracket for the harness. Didn't show the installation of the thermostat itself?
@tonyseptember7091
5 ай бұрын
Thanks for the video. Is there a reason why you didn't install the new thermostat or did you do it off camera?
@thepartsfactory4239
5 ай бұрын
Just off camera
@paulomachava1856
Жыл бұрын
Nice video I look buy this car so know what to deal with 🤝
@thepartsfactory4239
Жыл бұрын
Good choice! Getz are reliable overall if you keep up fresh oil and filter! Try get a manual gearbox though, Thanks
@darksideleroux
Жыл бұрын
Hi Lucas , i have the very same car , i see you didnt replace the thermostat since it wasnt there to start with i have some heating issues ,will i have any problems if i was to remove my thermostat ,ive got some heating issues ie,boiling
@3nityconcepts922
2 ай бұрын
I have an Hyundai Getz car, 2008 model that was just giving me headache of overheating I notice that when am using the AC with the car, the engine temperature raises. The radiator was removed and washed properly. Still, it raising in temperature in the traffic. I notice that when it does that, by the time there is a movement in the traffic, the temperature that raises from 28 degree fly to 75 when it traffic and start flashing the number 75 but when there is a movement, it drop back to 28 degree. the temperature drop from 75 degree back to the normal 28 degree temperature. The only cooling system that we work on it the radiator
@3nityconcepts922
2 ай бұрын
Additional coolant temperature sensor for hyundai getz 2008 model
@syahxxdomo8155
Жыл бұрын
Is it the same way for hyundai accent 1.6 2009?
@thepartsfactory4239
Жыл бұрын
Should be almost identical. Thanks
@Ninja666ism
4 ай бұрын
What about the ground that was connected to the thermostat?
@thepartsfactory4239
4 ай бұрын
Yeah put it on after this video. Just assist with grounding the moving water
@gerharddutoit1426
2 ай бұрын
Those bolts are not 12mm, they are 8mm with heads that fit a 12mm socket.
@3nityconcepts922
2 ай бұрын
additional the 2 gum with it
@pendulum2001
9 ай бұрын
Is that dog factory fitted🤣👌🏼
@NapoleonBorn2Party
10 ай бұрын
This doesn’t apply to getz 1.1
@chooiseah1377
9 ай бұрын
Very clear tutorial here mate....👍👍👍👍👍👍👍👍👍👍👍👍👍👍❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤Thanks for the upload
@gerharddutoit1426
2 ай бұрын
Those bolts are not 12mm, they are 8mm with heads that fit a 12mm socket.
@thepartsfactory4239
2 ай бұрын
Unsure what country you're in but they're a 12mm head.
Пікірлер: 22