√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@pamelawebster851
Жыл бұрын
I’m a 66 year old grandma and did this. The only thing I had a hard time with was the electrical connection-be sure to pull back pretty far so you can connect it. Great tutorial. Thank you!
@frankstear2225
2 жыл бұрын
Mention that having window in down position makes it a bit easier removing/installing door panel
@MrTheatreworks
Жыл бұрын
I'm so grateful for your video...! No extra talk, just the straight goods, and it all worked..! We actually kept pace with you, because we used an electric driver, instead of a manual screwdriver. Mention to your viewers that it can be a bit tricky to get the electrics re-clicked back in, but it worked. ALL GOOD. THANKYOU...! And the handle, from Amazon, was 19 bucks. Job done..!
@HandwritingHelper
8 ай бұрын
Omg I can’t thank you enough! I thought it was going to be too complicated but your instructions were amazing! Easy rough for a girl to do! 😅
@scotts1356
9 ай бұрын
I was able to replace the handle without taking the door apart. I made sure that the correct cable was on the locking part of the assembly. After I put it back together, the door lock will not lock or unlock. It's as those the cable has too much slack. The piece barely moves. The locking mechanism, (plastic part), barely moves, when I try to lock or unlock it. This is the 3rd handle I've ordered and they all do the same thing. What is causing this and how can I fix it? Thanks in advance.
@sweetcaramelsmile
2 жыл бұрын
Thank you! Thank you! Thank you! This was a life saver. My son some how had the entire handle broken in pieces. I was tired of rolling the window down to open the door and decided to repair it myself. Your directions were spot on. Especially that part about making sure to pull the lock case back.🙄
@vsgrp417
Ай бұрын
Thank you for your well-detailed video tutorial. It was incredibly clear and to the point, making the entire process straightforward to follow. In addition to purchasing the part you recommended, which was very reasonably priced, I also picked up a set of plastic pry tools at Harbor Freight for just $6.00. They were a tremendous help in easily prying the door panel open. Thanks to your outstanding tutorial, the whole replacement procedure took me around 30 minutes, and now everything works like new. Thank you again for sharing your expertise!
@arturovences8599
Жыл бұрын
Your video was great! I followed it step by step and now the handle is fixed and works just fine. Thanks man.
@jagstax7746
Жыл бұрын
Anyone help me the door is closed and I can't open it....? Any suggestions?
@powersinc6705
Ай бұрын
I’m am 61 years old 👩🏽 and this video save me so much money. I was able to do it myself❤ thank you
@august31queen
11 ай бұрын
Much appreciated tutorial. Very easy replacement while using this as a reference!
@bobbaker430
Жыл бұрын
Today i want to the junk yark i bought one and i replace it my self. Thanks o lot.
@MarkHarrington-xs8de
Жыл бұрын
Excellent vid - direct and no unnecessary stuff. Many thanks
@Finesse460
6 ай бұрын
Love this tutorial, super easy and I love how the technician explained it.
@tasel-js2qc
2 жыл бұрын
thank you for this video. this was VERY helpful!
@jquibble
Ай бұрын
Excellent small details in this video for removing and reassembling the door. I watched a different KZitem tutorial for taking the door off for a window replacement and had lots of little frustrations (like making sure the electrical slider is pulled all the way back before re-inserting) that this video makes clear ahead of time. Great work!
@RKO10S
2 ай бұрын
اشكرك شرح ممتاز بس واجهت مشكله في تركيب الديكور وتوزينه بس 👍🏻👍🏻
@luiszelaya6299
2 ай бұрын
I just replaced both my car fronts using this video. It's worth mentioning that most probably the screw caps are going to break. Both mine broke and I just spent $24 at autozone for replacements.
@tonyojeda-lv7qo
Жыл бұрын
Awesome guidance. Walked me right through it. Thanks so much.
@Riceburner30281
2 ай бұрын
At 37 seconds.. The second screw will be likely be rusty and hard to remove, I had to drill the head off of it just to get it out
@Christopher-vt4kq
2 жыл бұрын
Had trouble putting the connector with the locking mech. It’s a lot easier when you straighten the wires to pull it back further. Looking back at the vid the wires are straight whereas mine were bent 90 degrees.
@charlieinsingapore
Жыл бұрын
That's more than likely because someone had put them in with needle-nose pliers without removing the interior door panel. Mine was the same, plus a cable tie holding the broken bits together. Gotta love professionals!
@michaelfreeman681
2 ай бұрын
Thank you for your expert. I loved the job that you done and I have done it also. Thank you.
@2ndsam302
11 ай бұрын
My freaking electrical connector it's hard to put back
@Danosdays
Жыл бұрын
Why did this one need replacing?
@user-ju1cy3be4i
Жыл бұрын
video was great, just replaced door handle after viewing this and completed the job in 15 minutes
@meohearn
Жыл бұрын
This is a great video. Thank you! I now have the confidence to do the job myself. I just received the replacement part tonight, so I do the job in the morning.
@charlieinsingapore
Жыл бұрын
1000% spot on, thank you so much for this. The drivers door handle broke and it will be several days before I can get a replacement. I watched your video twice and in less than 10 minutes removed the interior from both front and rear doors, removed the rear handle, installed it on the drivers door, and replaced both interiors. Thank you again! Especially for the tip about the locking slide on the power window connector. And it appears that the door handle was already broken, and some "mechanic" had "fixed" it by holding it together with a cable tie (zip tie).
@ianpeden327
Жыл бұрын
Thank you for the very informative video. I was able to complete the repair easily.
@Barry-mm9ud
9 ай бұрын
I got the door panel off easily enough, but no matter what I do, I can't get it back on. It seems to fit over the top, but I can't push it into a position where the tabs align with the holes. Any ideas?
@Barry-mm9ud
8 ай бұрын
Ok, here is what I had to do, in case anyone else has the same problem. It was too tight a fit to push the whole thing down at once. Do it with the window rolled down, so you can see what is happening from both sides. Tilt the panel down toward the front of the door, and secure the tab closest to the side mirror over the metal edge of the door it is supposed to fit over. Then push hard against the panel (towards the door frame) as you lower the back end of the panel, making sure each tab in turn fits over the edge of the door. It helps to look down the edge of the door so you can see if the tabs are going over the edge. If you've ever installed a stick of memory into a memory slot on a computer, it's the same idea; don't try push the whole thing in at once, get one end secured in place, and then push it down front to back.
@channonredfern2535
Жыл бұрын
I successfully installed my new door handle in 15 minutes thanks to your tutorial ☺️ Much appreciation! Thank you 👏🏻
@Nellyslay
2 ай бұрын
U make it look so easy. I need mind to fix. Be fix
@chamogarcia4401
2 ай бұрын
Thank you bro. That helped a lot .👍
@tomiossi8092
2 жыл бұрын
Just did sons handle. Just followed along. Went well. Thank you
@Iknowyoumadnow
3 ай бұрын
Fool didn't even say the size
@jaytcapinpin
9 ай бұрын
Is there a way I can remove the inside door handle without removing the door panel? My door is stuck in the locked position. I am hoping to get to the rods that will unlock the door through the handle. Any information will help. Thanks in advance.
@ToyotaCamry2004
4 ай бұрын
Same car model 😢
@knobbista
Жыл бұрын
Followed this video step by step and did not encounter any difficulties. Thank you guys so much and God bless.
@CJVideoGuy
2 ай бұрын
Thank you!
@sasino
Жыл бұрын
This made me want to return the new door handles I bought 😂
@nelsondominguez4922
7 ай бұрын
Buen video muy bien explicado, Una tarea sencilla pero no dañe nada de mi carro ✅
@evila71
2 ай бұрын
Perfect step-by-step walk through. Thanks!
@lior9115
2 жыл бұрын
My white rod (top) goes half way back n forth , any advice???
@beck645
10 ай бұрын
Nice video but you forgot how important it is to press the water shield back onto its watertight position. You put the door panel back on with the plastic shield hanging loose. Very important to press it back onto the sticky stuff so you have protection from water getting in places you don't want it.
@TRQ
10 ай бұрын
+@beck645 Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
@KeAsiaShonteyce
2 жыл бұрын
thank you for this because my handle started to come out it’s self
@geo6625
10 ай бұрын
I will be trying this tonight. Wish me luck!
@gracedunn3780
Жыл бұрын
How do I replace the door latch cables to the handle of opening the door on a 2002 Toyota salera please
@TRQ
Жыл бұрын
+Grace Dunn We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ
@darrellroush1733
2 жыл бұрын
Great video. Thank you 😊
@TRQ
2 жыл бұрын
+Darrell Roush Thanks for watching our video! 1aau.to/m/Shop-TRQ
@cupcakemaster2
2 жыл бұрын
i can’t connect my window breaker to the circut
@Winc3Winc3
Жыл бұрын
I have to do this in a few weeks. Saving this
@ceetwyce335
2 жыл бұрын
Thank you, thank you, thank you for this video!
@Evantheplaneguy
2 жыл бұрын
Thank you this was very useful
@abelluviano8723
2 жыл бұрын
very useful video thank you
@joselynflores2158
Жыл бұрын
This is awesome! Thank you !!
@abelluviano8723
2 жыл бұрын
Thank you very helpful
@146whitegorilla
8 ай бұрын
Thank you!
@rammallah3117
4 ай бұрын
Perfect video
@manifestonkomo7323
2 жыл бұрын
Thank you very much
@sportsfan2735
Жыл бұрын
Thank you
@commandZee
2 жыл бұрын
Thanks!
@skywalkerb6746
Жыл бұрын
This helped a lot, thanks.
@TRQ
Жыл бұрын
+Skywalker B Thanks for the feedback! 1aau.to/m/Shop-TRQ
Пікірлер: 71