Howdy Jeepers! Hope you all like this video... chapters are pretty well organized to each task. Let me know what you think!!! www.amazon.com/shop/autoedits/list/3DK63XK3I5IL6?ref_=aip_sf_list_spv_ofs_mixed_d
@Ducati98T
8 ай бұрын
Sucks you had to replace the housing twice! But I bet it got extra clean in there the second time ;-) I just did this at 220k miles on my 14 JKU, so you may get to do it again! I forgot to put the foam back in, though, and I still haven't gotten around to it... Thanks for another awesome video!
@skulldriver1019
8 ай бұрын
On the dorman quality control issues. I read up on this and ordered the mishimoto oil cooler/housing for my pentastar ram that just sprung this leak.
@jimcabezola3051
8 ай бұрын
Excellent video! It can be used not only as a reference work, but also a cautionary tale. Here's to another 10 years and 80,000 more miles. Aloha.
@AutoEdits
8 ай бұрын
From what I've researched... that foam missing hasn't affected many jeepers so rest easy on that one!
@AutoEdits
8 ай бұрын
I'm so thrilled you got that from this video because I honestly wanted more than just a how to!!! Thanks so much for this feedback... I appreciate it a bunch!
@CharlesJBoard
14 күн бұрын
Excellent video. It is a real demotivator when you have it all done and find you have to go back in and disassemble stuff to fix an issue that should not be there. Patience is a virtue for sure!
@AutoEdits
10 күн бұрын
So true!
@jeradmiller4575
2 ай бұрын
Two quick points: 1. I've done this repair twice now and referenced this video both times. It's a fantastic how to guide. Thanks Jason. 2. If you're in a time crunch and can't wait for e-sockets to be delivered, I found some in stock at my local Harbor Freight for $11.99 (Pittsburgh brand). They did the job.
@gillafunk
8 ай бұрын
This is the exact way most of my automotive projects turn out. So it’s nice to see everybody else has the same issues.
@AutoEdits
8 ай бұрын
Glad to share the pain...lol
@kalanipatterson5467
Ай бұрын
Thank for the video, I went with the Mishimoto oil cooler housing instead of Dorman, and the Baxter spin on oil filter adapter.
@Tony3deee
6 күн бұрын
I’m really curious how happy you were with the Mishimoto product. By the way, great video Jason
@steveo6715
8 ай бұрын
Jason is the best Jeep KZitemr!
@AutoEdits
8 ай бұрын
You are too kind... thank you!
@jeradmiller4575
8 ай бұрын
Being the owner of a 2013 JKU with 120k myself, this video is timely and informative. Thanks.
@AutoEdits
8 ай бұрын
Hope there's a nugget or two in there for you!
@jasonjeffries9871
8 ай бұрын
I also have a 2013 JKU, with 130k. My oil cooler failed two days before you posted, and I wish that wasn't the case. I went with the Dorman, and had good luck with the unit, although pricey at my local parts store... My oil cooler was also not cracked, and I probably could have saved the money and gone the seal only route and replaced all you did here instead. Funny that the oil temp sensor in both of ours spun like that... thanks again as always!
@philapodaca3568
21 күн бұрын
Thanks for doing this video! I did mine this week including all the parts you replaced as well. Unfortunately, When I got in to it I found a crack on my radiator so I did that too with a new Mishimoto radiator.. You truly inspired me with this video thanks!
@AutoEdits
21 күн бұрын
I'm very happy to hear this... congrats on getting such a big repair done yourself!
@garygomer7940
5 ай бұрын
Awesome video and excellent job walking through the oil cooler replacement process. I love your passion to be proactive about maintenance of items while you are “all up in it” AND cleaning everything at the same time. When I went to tech college for automotive repair, they stressed cleaning everything around whatever you work on for two reasons, 1) makes for great reassembly of everything and 2) which is huge, it shows the vehicle owner, who just spent a lot of money on whatever the repair was, that someone did something and they can “see it.” After all my years, I have never forgotten #2 and I have actually had people comment that their engine looked new again. Thanks for sharing Jason, I always enjoy your work!
@AutoEdits
5 ай бұрын
I dig hearing stories like that, thanks!
@billgrinder280
8 ай бұрын
Jason, I have a 2013 jku also. I went to have it smogged, it wouldn't pass, had a bad oil temp ( or pressure) sensor. It is one that attached to oil cooler. I had the shop do it as I heard how much of a pain it was. While it was apart I had them do plugs ,etc. I have to give a huge shout out to Ricks care care here in Santa Maria. Super great work and customer service. I really enjoy your channel. Keep it up.
@davidwiersema9415
8 ай бұрын
I know exactly how you were feeling with the realization of having to do the same job over again. I changed out by 3.8L on my 08 wrangler due to a spun bearing, put in a new (rebuilt) engine- oil leak from the rear main seal!!!... Great video as always!!
@AutoEdits
8 ай бұрын
OH MAN! That sounds awful 🤣 Thanks so much for being here.
@RuckusHuckusYT
8 ай бұрын
Godspeed to you man, tackling the ol Oil Cooler Housing is one hellva challenge to service
@AutoEdits
8 ай бұрын
Thanks!
@markshutt6000
8 ай бұрын
I've been there, having to undo hours of work, be it my own fault or a faulty part. But you persevered and got it done in meticulous, clean, AutoEdits style :) Keep on keepin" on!
@AutoEdits
8 ай бұрын
Thanks 👍
@Boggersugar8114
2 күн бұрын
Great video. Thanks for sharing I’m a follower now
@AutoEdits
2 күн бұрын
Hope it helped!
@Jo_Nthejeep
8 ай бұрын
This was an awesome video! Love the trial and error type of content unlike most other KZitemrs who only post the successful parts. This is exactly what us DIY-ers go through about 90% of the time.
@AutoEdits
8 ай бұрын
Hey thanks!
@Petey003
8 ай бұрын
Awesome video, I always miss your posts when there’s more time between them. It always sucks when things don’t pan out the first attempt, then have to order more parts, wait, reinstall… but man the relief and satisfaction after it’s all done is amazing!
@AutoEdits
8 ай бұрын
ABSOLUTELY!!!
@jtb5047
8 ай бұрын
2 times is the charm. Great video Jason. Every Jeep jk owner has had to experience the infamous oil filter housing leaking. Big fan of the channel. Keep up the great work! We say hello from Long Island, NY
@AutoEdits
8 ай бұрын
Thanks 👍 And howdy to the other coast!
@Georgia4Low
8 ай бұрын
2015 JK 110k miles and never an issue with the oil cooler. Crazy how the internet is littered with people having issues.
@evenflowoverland
4 ай бұрын
Had to hit pause and order pizza for some reason. 😅 From one JK Jeepin Jason to another, thanks for being awesome. 👊🏻
@AutoEdits
4 ай бұрын
Awesome! Thank you!
@grt49er
10 күн бұрын
I have to do this pretty soon with my Jeep. It all seems to be under that intake. If you go in I guess it's best to just do everything.
@AutoEdits
10 күн бұрын
That was my thoughts exactly.
@mfranano78
8 ай бұрын
I will definitely be needing this video in the future. The step-by-step and parts list make it seem doable in the garage. Most of all....save money!! Another bonus...if something goes wrong or lights up that check engine light, I will know exactly where it is and how to fix or repair it.
@AutoEdits
8 ай бұрын
Thanks dude.
@christopher273
8 ай бұрын
Kudos to you for taking on such a non-trivial repair! I’ve watched a number of videos about this particular task, and it is definitely not for the faint of heart. Excellent video.
@AutoEdits
8 ай бұрын
Hey thanks!
@samhines2034
8 ай бұрын
Here in the Midwest it's still just a touch too cold for me to bite this bullet yet. I definitely saved this video for a month from now, though! Thanks man!!
@AutoEdits
8 ай бұрын
Bundle up!!! LOL
@jonathanwelter
8 ай бұрын
Bummer that you had an issue with the Doorman product. Mine has been a nonissue. Great video and thanks for taking us along.
@AutoEdits
8 ай бұрын
When I get parts like that... I kind of know there is a chance of this happening. Thanks for watching!
@terrysloan8429
7 ай бұрын
Morning Jeeping Jason. I have watched your videos for the seven years, and you are one of my favorites. I most recently had to change my oil cooler when I notice that right after an oil and transmission fluid change, I saw the leaking oil down the sides of the transmission. Your video just posted, and I looked at it about 5 times because I knew that i had to do this job. I have done a tune up before, so I knew how far I had to go into the motor. I debated with OEM VS Aftermarket and settled on Dorman. After all of the videos I watched I have not found a for sure issue with Dorman products, so I took a shot on it. The job was time consuming, and I gave myself the weekend to complete it. After reassembly, I have two issues. There was a no start condition from injectors 2,4, &6, so back off the upper plenum goes. I found the fuel line was not connected all the way so that was fixed. The 2nd issue was my brown wire (Injector signal wire) in the main wiring harness had backed out during disassembly. I found it by watching more "KZitem Videos". Once corrected, the jeep started and is currently running fine. For the first week i looked down in the valley to look for signs of leakage. So far so good. Sorry for your bad luck with your Dorman install, but for me, this is the second time this job was done. I had the dealership install one back in OCT of 2019 and it lasted just around 5 yrs. I'm hoping this Dorman last longer than that because this is not a routine job I want to keep doing. Keep making great content and keep on "JEEPING". Terry.....
@AutoEdits
7 ай бұрын
That is a serious journey ... glad to hear it's a so far so good situation! Thanks for sharing the story here!
@rodburger7827
8 ай бұрын
Good job Jason, I'm amazed that Dorman is still in business !!
@AutoEdits
8 ай бұрын
Being honest, they make plenty of good stuff and I'm glad they offer parts I couldn't get easily otherwise. It is a bit frustrating to have this type of failure though.
@philapodaca3568
Ай бұрын
@@AutoEdits Those Dorman units are known for failure on the seals and poor casting.
@Roberto68n
8 ай бұрын
You always overwhelm us with your mechanic skills and knowledge, making it look easy and fun!! Thanks for another very interesting and educational video!!
@AutoEdits
8 ай бұрын
Thank you!
@EyalGrossfeld
8 ай бұрын
Jason man, defiantly the best oil cooler jk repair video on KZitem. thank you for your efforts of making it.
@AutoEdits
8 ай бұрын
Thanks 👍
@tae1364
8 ай бұрын
In my opinion you are the best jeep diy guy out there. Keep up the great work.
@AutoEdits
8 ай бұрын
You are too nice! Thanks!
@Tahoebronco
8 ай бұрын
Thanks for new video Jason. I really appreciate your attention to detail in your editting. Your videos are always seemless and easy to follow.
@AutoEdits
8 ай бұрын
I appreciate that!
@JoseOrtiz_1416
8 ай бұрын
This will be a fun one I bet !
@AutoEdits
8 ай бұрын
I hope so!
@fwschnaar3179
8 ай бұрын
You’re a Trooper Jason… I would have lost it… But Thank You for (on KZitem) being real, and dealing with those Things that can happen in Life ! 👍🍻… And Yes the Mopar is into the Gen3 parts now, and very rarely is the actual housing the problem (# OEM Mopar Seals only)… Looking forward to your next Video 👍
@AutoEdits
8 ай бұрын
Oh I did lose it 🤣 Went over and vented to my neighbor, watched a movie and went back after it the next day!
@SilentBob1932
2 ай бұрын
Excellent clear Video, I Did all this except hoses and Radiator Cap. I also replaced Spark plug tube seals, I had one leaking oil on a coil. I also added a Baxter Oil filter Adapter, no more Dry Rattling Starts since it uses a spin on Filter that doesn’t drain back like the Cartridge one.
@AutoEdits
2 ай бұрын
How do you like the Baxter?
@SilentBob1932
2 ай бұрын
Well worth it, It’s my Wife’s Jeep. She likes to use the remote start to warm/cool the vehicle while it’s in the garage and it always made me cringe every time it started up with that rattling at start up , plus I get to use a good Mobil 1 Synthetic oil filter M1-212A
@FightinAggieFarmer
8 ай бұрын
Sorry to see you had a bad experience with the Doorman housing. I used one on my JK after 2 other OEM ones, and it worked great. Never had an issue after that. Glad to see her fixed though and back on the road.
@AutoEdits
8 ай бұрын
In my mind, it's kind of like shopping at harbor freight... sometimes good and sometimes not so much 🤣
@cmsgtjasonh5794
8 ай бұрын
Wish I had this video a few years back when I swapped out my cooler on my 2015 JkU. Great work sir!
@AutoEdits
8 ай бұрын
Thanks! 👍
@1RoadGarage
8 ай бұрын
Dang brother, that stinks! Glad you got it handled though. The bright side is that it failed immediately and not on the freeway or out in the middle of nowhere. While unpleasant, probably the best scenario you could have had. 🤙
@AutoEdits
8 ай бұрын
Hey thanks dude... yeah you are right for sure... I appreciate that!
@fuskk
8 ай бұрын
Ahh that anxiety relief the second time around. I can feel that! 😂
@AutoEdits
8 ай бұрын
I'm glad you got that... it seems to lose something in video sometimes... thank you!
@JEEP-N-DIRT
8 ай бұрын
LOL, I stayed to the end. Agree on the cooler, sometimes sticking with OEM is better. Good stuff buddy.
@AutoEdits
8 ай бұрын
I appreciate that soooo much. THANK YOU!
@sKeetsJeep
8 ай бұрын
Another great how to - thank you so much for taking the time to share. Something that I’ll be referring back to when my time comes to tackle this task. I sure do appreciate your efforts and guidance! Take care and I look forward to the next one.
@AutoEdits
8 ай бұрын
Thanks!
@scottzederbaum2134
8 ай бұрын
Great video as usual. First place I go to when I have Jeep questions. Really felt for you when the oil was leaking after the replacement. I've done the same replacement but was fortunate to have no leaks. Would have been a lot more PO'd than you seemed. Yours was one of the first channels I followed when thinking about and ultimately getting my own Jeep. It's incredibly helpful just to see you working on the Jeeps and explaining things honestly, the good and the bad.
@AutoEdits
8 ай бұрын
Thank you so much!
@adamstewart5340
8 ай бұрын
If it makes you feel any better about what you had to just spend, I just paid $1,200 (on 1/5/24) at the dealership to have just the oil cooler replaced for this same leak on my 2015 Jeep Grand Cherokee with the 3.6L. I wish I would have had the time to do it myself. This video is reminiscent of the early channel. This is the content I really appreciate from you and why I subscribed long ago. Good work!
@AutoEdits
8 ай бұрын
I appreciate hearing this!
@guitarrocker0991
8 ай бұрын
Wish I had done the radiator hoses when I was doing all of these maintenence items and then replacing my rockers and lifters a couple of months ago. I had them off anyway but didn't even think about replacing them. Things always pop up for me during these repairs too. And I swear replacing that pcv valve took me half my overall repair time. I used a small torx bit taped to a small spanner to get to the screws. I also upgraded my lower air intake and fuel injectors to the JL components and they've been great so far.
@AutoEdits
8 ай бұрын
Sometimes good info sharing like this on the web... thanks for that input!
@brian2359
8 ай бұрын
I’ve learned just like you, I’m at the point in my life that it’s well worth buying OE parts! Are they more money? Yup, they sure are, but they work and perform so much better! Great video!!
@AutoEdits
8 ай бұрын
Thanks!
@NightFall_Rubicon
6 ай бұрын
Just did my oil cooler back in November. Would've definitely used this how to as a step by step. Well done! sucks about the dorman issue.. word of advice for those about to tackle this job. Take your time cleaning up any casting issues. No leaks for me as of now, and I strongly feel it's because I prepped the cooler first with a file. biggest regret for me was not doing the "because we're here" replacements (coilpacks, sparkplugs, thermostat etc). Thats going to suck. Keep up the great work! Big fan of this channel
@AutoEdits
6 ай бұрын
Hey thanks for the share!
@thomaslee7684
8 ай бұрын
Great video, I've never worked on a Jeep and was able to follow along easily. I did basically the same thing on my Crown Victoria last year, sans the oil cooiler. Swapped the intake manifold instead and did the spark plugs, valve cover gaskets, fuel injectors, etc.. a classic "while I'm in here" rabbit hole
@AutoEdits
8 ай бұрын
Nice work! Glad to hear from a fellow rabbit hole dweller 🤣
@pattkinder612
8 ай бұрын
Good stuff, Jason. My 14 JKUR is pushing 104k and hasn't had an issue or been addressed yet. I wasn't looking forward to it, but feel much more confident now.😎👍
@AutoEdits
8 ай бұрын
Check that pcv valve! I thought mine was fine until I got it out and looked… it was a mess 🤣
@RubiconUnlimited
8 ай бұрын
wow, yet another EPIC autoedits video. this is so valuable and really wish you made this video before I tackled all of these items already. Love the cleanup job too, top notch!
@AutoEdits
8 ай бұрын
Ha thanks! You know the old, while I'm there thing just takes over and next thing I know... stuff is clean 🤣
@billjennifer8803
8 ай бұрын
Thanks for the video. My JK is 10 years old with about 60K. These jobs are on the horizon. I just hope my oil housing holds out. Thanks for the honest review on the Dorman.
@AutoEdits
8 ай бұрын
I do my best with that stuff!!!
@richcrum7683
8 ай бұрын
Yep this is common and changed my out to an aluminum one ( not Dorman). I did replaced my heater hoses and hose to the oil cooler while back there since I don’t think they will last 10 more years 😂😂😂. Good video!
@AutoEdits
8 ай бұрын
Thanks for sharing!
@timothymillsaps5104
8 ай бұрын
Hey Jedi Jason... I was looking forward to seeing this video come out. I knew it would be a tedious job... phew! So glad I took the easy route and had my trusted mechanic do this one for me. He also talked me into staying with the Mopar oil cooler brand... kinda glad I did now. Anyhow, excellent job brutha... keep them coming!
@AutoEdits
8 ай бұрын
Thanks!!!
@khalidkhatib5621
4 күн бұрын
It will leak again after 60k miles if you used the plastic housing again. Ask me how i know. 😅
@PedroGarcia-bu3vb
8 ай бұрын
Always love your videos and your Jeep. Thanks again!!! Continue doing more Jeep videos. Greetings from Puerto Rico 🇵🇷
@AutoEdits
8 ай бұрын
Thanks, will do!
@brainards11
8 ай бұрын
I look forward to seeing what new stuff you are doing to your Jeep Jk...it always helps me with my JK. Thank you.
@AutoEdits
8 ай бұрын
More to come!
@jeepinwithjulia
8 ай бұрын
I recently had to replace my oil cooler and radiator. I love how you do so much DIY! However, I gladly paid my mechanic to do that! I did install my Cargo Dog system (from your video) and am thrilled with it! I linked your video in mine.
@AutoEdits
8 ай бұрын
Ha! Great job on your video! I'm still really liking the Cargo Dog set up!
@kdubgarage7202
8 ай бұрын
Perfect timing… I just ordered these parts for mine that started leaking oil.
@AutoEdits
8 ай бұрын
Heck yeah... good luck on the project!
@sjf2853
8 ай бұрын
I just bought the Mishimoto oil cooler for my JKU and have been waiting for your video before I do my install. I gotta say the Mishimoto looks so much better than the doorman. Thanks man for another great video. You're one of the few KZitemrs I trust.
@AutoEdits
8 ай бұрын
Thanks so much!!!
@i-Lion9
5 ай бұрын
Did you install the mishimoto oil cooler yet? I'm between dorman and mishimoto
@sjf2853
5 ай бұрын
@@i-Lion9 Not yet unfortunately.
@TXFarmRoad
4 ай бұрын
@@i-Lion9 I put one in and it worked great . Except I did switch out the o rings it came with for some better Mahle o rings 👌🏻
@i-Lion9
4 ай бұрын
@@TXFarmRoad awesome thanks
@EricScheck
4 ай бұрын
Thank you! I just bought a 2014 Jeep Wrangler Unlimited Sport that I'm prepping for many of the things you demonstrated! Coil packs and plugs to be changed first. Thanks again! Have saved this vid for future reference.
@kfkf1922
8 ай бұрын
perfect. will do this maybe this summer. i appreciate the editing/music as well. always such a professional job!
@AutoEdits
8 ай бұрын
I appreciate hearing this... I got a little carried away but was having fun with the edit 🤣
@chernissjd1
8 ай бұрын
Really appreciate the honesty and frustration. So many of us have the same WTF experience when doing self maintenance.
@AutoEdits
8 ай бұрын
I try to keep it real over here... sometimes it stings though 🤣
@dh227644
8 ай бұрын
Hey Jason enjoyed the video and your honesty with the issues. I didn’t see that you replaced the sensors, just transferred them. I had to replace the oil temp sensor in my daughter’s jeep with 90k miles so did the Dorman housing while there. Just a thought. I actually had it done at a shop due to my work schedule but now I need to replace the housing in my wife’s JK. Don’t have the funds to have a shop do this so I’m doing it myself Other videos I’ve seen claim that the plastic plug on the housing can come out and showed an example of that issue. Also the ridges around the seals can become brittle and break down causing a leak. For those reasons I think I’m gonna do the Mishimoto housing with Mopar seals per the rest of the internet’s suggestions Thank you for your video offering on this subject. Reminded me that I also need to add a PCV valve to my list
@AutoEdits
8 ай бұрын
Unless I suspect or know a sensor is bad, it's best to re-use what works. I'll be curious to hear what you think of the Mishi unit.
@dh227644
8 ай бұрын
@@AutoEditswow! What a weekend and what a process. First of all, this was the only weekend I had available to do this so I ordered the Mishimoto with rush delivery only to find that the item was back ordered indefinitely so I had to cancel the order. I then had to source an oil cooler locally which meant the Dorman. I must have watched a dozen other videos on the subject and non called out the seals so I stayed with the Dorman ones. It was late Friday and couldn’t get any. Mopar locally anyway. Well wouldn’t you know…thers a constant drip of coolant coming from my bell housing. Now it’s Sunday and no Mopar parts available so I took it to my local shop on Monday to have the seals replaced with Mopar ones. Let’s hope it works. Geez Note- this shop used to use the Dorman coolers but has since gone back to OEM as they say they have been more reliable. Mayb Mopar has made some refinements to their oil coolers?? Certainly makes me question the decision of engineers to put that item so deep into the motor
@dh227644
7 ай бұрын
Update: the seals on the Dorman cooler still leak. I don’t have the time to replace so I took it back to the shop that did my daughter’s Jeep. They’re replacing the whole things with their own so that they can warranty it. Understandable. They are giving me back my old Dorman so that I can seek a possible refund from the auto parts store. Reminder: I never got to try the Mishimoto because they were out of stock at the time I did the repair
@nastycbr
8 ай бұрын
I feel your pain, I recently installed a new thermostat housing on my ranger and it was a faulty unit. Only positive is it comes apart way easier the 2nd time. Like many others have said, thanks for showing the oops and not just the ups.
@AutoEdits
8 ай бұрын
Glad you’re here!
@bcnomadsoffroad2110
8 ай бұрын
Thank you for your great videos, Jason! They are always very educational and easy to follow along to.
@AutoEdits
8 ай бұрын
Glad you like them!
@brucesinclair9628
8 ай бұрын
Great video Jason, I'll be doing some of these in the spring once we get out of our -30c weather so I'll book mark this :) Keep them coming love the content !!! Peace from the great white north
@AutoEdits
8 ай бұрын
Howdy and thanks!
@pch-395
8 ай бұрын
Love your positivity! I enjoy all your content and this one was especially great!
@AutoEdits
8 ай бұрын
Thank you so much! Keep me in mind for some those trail runs this year.
@nicholai40
8 ай бұрын
Be glad that it happened in the garage rather than on the road.
@AutoEdits
8 ай бұрын
True
@trike4
5 ай бұрын
I feel your pain.....Yesterday I installed the Dormans Oil Cooler on my JK.......today I have P0522 and P0523 code ...low and high oil pressure code.........I'm guessing bad Oil Sensor on the Oil Cooler........I did install brand new ones.........Guess I have re-work to do this weekend..........Thanks for this video........
@AutoEdits
5 ай бұрын
Sorry to hear that
@tazin8r
8 ай бұрын
Another great video. I always look forward to them. I've got a few notes on this one though. You shouldn't just replace the seals on the oil cooler, replace the whole unit. Not only do the seals go bad but the housing also warps. Allegedly you can use the upgraded version from later models on the earlier 3.6's. I've heard mixed stories on Dorman parts. Some people swear by them, others swear at them. As JT from @OnlineMechanicTips says "It's Mopar or no Car". Getting a pick under the edge of where the hoses connect helps to release them. You missed telling everyone about the bleeder screw on the thermostat housing which helps with bleeding air from the cooling system. There is a massive debate online about whether you should use Anti-Seize on spark plugs. If you don't reduce the torque spec when you tighten them you can overcrank the threads. Most modern spark plugs already have an Anti-seize treatment and most plug manufacturers don't recommend using anti-seize. This video explains: kzitem.info/news/bejne/2ZBjsYOCbZmLraw
@AutoEdits
8 ай бұрын
Solid bunch of info.
@eggdashure
8 ай бұрын
I'm going back in again myself. Three years ago, replaced the oil cooler, had to use an Amazon one during the pandemic. Failed in 6 months, replaced with Mopar, lasted two years and failed again. Finally replaced with the Dorman which has been good so far. Unfortunately, now I have a knock sensor error, which is right under the oil cooler. *Eyeroll* As was said, do it while your in there!
@AutoEdits
8 ай бұрын
OUCH!!! 🤣
@tarzan30809
8 ай бұрын
Thank you! Excellent video, doing my 2012 Rubicon oil cooler filter housing today. Going with the Mopar part with confidence after your advice!
@AutoEdits
8 ай бұрын
Good luck! Have fun!
@tarzan30809
8 ай бұрын
Just finished, everything looks well, Thanks again!@@AutoEdits
@darenbabcock9005
8 ай бұрын
WHATS UP JASON!!! Glad to see another great vid on the Jeep bud!
@AutoEdits
8 ай бұрын
Howdy!
@xTinBenderX
8 ай бұрын
Excellent video that will help many Jeepers as always! Dealing with Mopar maintenance on multiple vehicles and gleaming experience from many like minded others, it seems the OEM replacement parts are usually best way to go. Unless it's a known part failure that hasn't been improved.
@AutoEdits
8 ай бұрын
Sometimes I must learn the hard way 🤣
@EngiTrek
8 ай бұрын
Still enjoying the Grease Monkey gloves I won in your give away. Thanks!
@AutoEdits
8 ай бұрын
Glad you like them!
@RobertGeneretteIII
8 ай бұрын
Right on time! I was getting that burning oil smell in my 2015 JKU and will need to replace the oil cooler. Today, I had a code P0301 pop up. Ugggg. Wish you were my neighbor.
@AutoEdits
8 ай бұрын
That's an interesting cylinder misfire code! Well, if you were close by... I do work for fig newtons or pizza. Good luck on that repair!
@TXFarmRoad
4 ай бұрын
Been there .... PCV valve for the P0301 . A bunch of gunk gets stuck in 1 if it's faulty
@onemorep6
8 ай бұрын
Great video, did my oil coolant system a few years ago on my 2013. Intimidating but doable, just take your time.
@AutoEdits
8 ай бұрын
Nice!
@DAVIDYEATS-bd8qr
8 ай бұрын
Me and my brother replaced mine on my 2018 JKUR. It’s not to bad. Just a lot of bolts in awkward places 😂💪😎👊
@Teddy_bear155
8 ай бұрын
Great video Jason. This kinda seals the deal for me. I was bouncing back and forth on doing the doorman or mishimoto oil cooler filter housing. I'll be going with the mishimoto for sure. The lack of quality control and the extreme differences between the same parts on the doorman is too much for my liking. Keep up the good work!
@AutoEdits
8 ай бұрын
I would agree with your assessment!
@i-Lion9
5 ай бұрын
Hows the mishimoto oil cooler holding up?
@overlanduh
8 ай бұрын
I just did all of that over summer since I had to open up head to replace rocker arms. Definitely took the weekend to get it done. I found the aluminum oil housing after replacing with Mopar unit and wish I had found that before. Everyone keeps saying I should have gone with the aluminum one.
@AutoEdits
8 ай бұрын
I don't necessarily believe the aluminum housing is best. The mopar unit is very good.
@Seveer1313
8 ай бұрын
The only suggestion I would add, is change the sensors with Mopar sensors at the time of install regardless of the type of cooler used. We run into a lot of Aftermarket sensors failing shortly after swapping them. Also as you found out the removal from OEM cooler can be a huge P.I.T.A. Just a side note Champion 9407 Plugs(Same as OEM just no Mopar labeling) can be 9 bucks or less if you shop around
@AutoEdits
8 ай бұрын
Good tip!
@StlrNtn95
8 ай бұрын
I was so frustrated for you when the first part failed! On a positive note, I am on my 3rd oil cooler housing (including the original) and can tell you that the last time mine was replaced (about 6 months ago), it cost me about the same, thru a local shop, as your total bill, but I only got the new housing!
@AutoEdits
8 ай бұрын
Wow, that's a lot of coolers! Thanks so much for the support!
@Thexkidd
8 ай бұрын
I have a 2013 also. 210 thousand kilometres. The cooler was done once.
@hamelthvillalobos4555
8 ай бұрын
I really wanted to see how you got the spark plug socket/extension on the passenger side plugs. I could not fit an extension in there because of the battery tray. I had to remove the tray which was the toughest most annoying part of the job. I changed plugs when I had a lifter tick that I tackled. Even that was easier than getting an extension into that passenger side plug by the battery tray. Sorry you had to go through the failure point, happens to us all especially with how complicated mopar decided to make maintenance on these jeeps.
@AutoEdits
8 ай бұрын
oh darn... I very easily used two shorter extensions on the socket and would connect/disconnect going down the plug hole. I thought about sharing that part but this video felt so long already. Sorry dude.
@hamelthvillalobos4555
8 ай бұрын
thanks for the info! I'm not very tool savvy, but i'll definitely do this next time I get around to the plugs@@AutoEdits
@richardlo
8 ай бұрын
Recently did my spark plugs put everything together and then I saw the foam thing on driver side spark plugs on the floor still. So I had to undo everything just to make sure everything went back the way it came off. Not as much work as you but I get the feeling.
@AutoEdits
8 ай бұрын
HA!
@ajantics
8 ай бұрын
Another amazing autoedits video! Thank you for taking the time and going through everything as always. I am bummed that the new doorman oil cooler you installed was faulty! I was really wanting that thang to be bullet proof.
@AutoEdits
8 ай бұрын
Thanks! I am hoping the second time around is the one 🤞
@jacksjeepinchannel5349
8 ай бұрын
Great video. I have a 2014 JK Rubicon with 93k on her. I'll be doing this soon also.
@AutoEdits
8 ай бұрын
Good luck!!!
@28Jcarlo
8 ай бұрын
Yea avoid Dorman if possible! Great video
@toddhobert
8 ай бұрын
Great video. What a bummer about the Dorman. I had considered that but not anymore!
@AutoEdits
8 ай бұрын
Thanks! Yeah, I’m still not exactly sure what failed.
@alexpallares3733
8 ай бұрын
My jeep just threw the P0128 code this morning I’m at about 120,000 miles so I’ll be doing these exact repairs this weekend. Thank you Jason! Good to see another video!
@AutoEdits
8 ай бұрын
Thank you for watching... best of luck on your repair!!!
@cyclonekevin6199
8 ай бұрын
Good to see u back
@AutoEdits
8 ай бұрын
Glad to be back, thank you!
@baldeaglegarage
8 ай бұрын
Yep, sometimes new parts are bad right out of the box. Hopefully that 2nd Dorman unit holds up. Is there a better aftermarket unit that is a completely different design? Maybe something that doesn't mount under the intake, or just plumb up a separate radiator style cooler in the grille.
@AutoEdits
8 ай бұрын
I'm not sure interesting suggestion... hmm
@ericruud4412
8 ай бұрын
Jason, I thank you so much for the video. This is true to life, the problems that arise when we DIY. I really felt your disappointment after starting the Jeep. You could have easily edited all of that out and I appreciate that you did not. Great job as usual!
@AutoEdits
8 ай бұрын
Being honest... it's a little embarrassing to fail like that (and share) but I'm hoping in sharing the authentic truth... more people will feel comfortable at least trying to push their comfort zone and grow their mechanical know how.
@JasonsFourCamFox
8 ай бұрын
You should've added the Baxter Motorsports Spin-on Oil Filter option, to prevent dry engine starts! Whenever I get around to doing this same swap, I plan on installing it too :) Just something you should look at!
@AutoEdits
8 ай бұрын
I'm interested in the Baxter option but kind of ran out of budget for this particular service. Maybe down the road a bit.
@adamjohnson319
8 ай бұрын
Nice Jason! Great video like always! I’m getting ready to do plugs and wires on my jeep. Maybe I’ll do the pcv also since I’m removing the intake.
@AutoEdits
8 ай бұрын
I highly recommend that course of action!
@mzk6550
8 ай бұрын
Wow!!! I really enjoyed this video. Thank you!
@AutoEdits
8 ай бұрын
Thanks!
@BurninRubber6
8 ай бұрын
I was late to the autoedits party but found your channel after buying our jk just over a year ago and have used many things you've recommended over the years. On a different note, I'm an auto tech professionally and have done a number of dorman oil coolers without an issue and dont have any problem recommending them to customers, which makes me think your issue with it was a random occurance. Theres nothing wrong with going oem though, there seems to be less chance of a defective part going that route
@AutoEdits
8 ай бұрын
We both mostly agree. Being the face on the video sharing my experience I feel the need to be honest and help others make informed decisions before being elbow deep in a repair. I ended up with a Dorman unit in there and have other parts from there in service. But even a random bad luck failure on a part that tedious to replace is a no go for me.
@BurninRubber6
8 ай бұрын
@AutoEdits I totally get it and I think we all appreciate the absolute honest review on a part that you're installing. It's necessary to show the good, bad and ugly of whatever you're doing if you're name is attached to a product. Prior to the dorman unit coming out we installed oem cooler and filter adaptors, again, without failure
@Demon_Outlaw
8 ай бұрын
Great learning experience watching what to do in case of install issue and how fix problem hey were human nothing gose right all the time.
@AutoEdits
8 ай бұрын
👍
@stephensharpe2029
8 ай бұрын
Thank you so much for these videos and for keeping your JK. Im not a mechanic but you’ve helped me tackle so much more than I ever thought I could. And on that note, a question: have you ever heard of the Baxter Performance Oil Filter Cartridge to Spin-on Adapter? If so, I was curious about your thoughts on it or even if you’d consider an install video?
@AutoEdits
8 ай бұрын
It looks good to me... I almost pulled the trigger on that but the budget for this repair got a little out of hand for me. So it will have to wait.
@davids6106
8 ай бұрын
I attempted to use the Dorman unit on my ‘17 JKU and the o-rings failed 3 times (even OEM were pinched or blew out eventually). My factory housing wasn’t cracked so I just reused it and replaced the o-rings with OEM. Been leak free for over a year. Did the same for my gf’s JKU as well. Tip for anyone doing this, reuse your stock part if it’s not cracked and save $. I also replaced the sensors while it was apart, as mine were leaking.
@AutoEdits
8 ай бұрын
If I was paying attention, I would've thrown those felpro gaskets in my stock housing and been much happier. I'm really hoping not to do 3 times like you did... lol
@davids6106
8 ай бұрын
@@AutoEditsI waited about 20-30min letting it idle after each attempt just to verify. Hopefully yours is all good now! Seeing oil drip down the bell housing after waiting was heart breaking each time lol.
@silentjde
8 ай бұрын
I’ve put hundreds of factory coolers in without issue. We had a customer show up with his own Dorman cooler and guess what, it leaked, lol. Also curious to see if those plugs last, jeeps never liked any other plugs
@AutoEdits
8 ай бұрын
Yikes! We'll find out about the plugs together 🤷♂️
@marcus2534
8 ай бұрын
The timing of this video is so good! I have plans to fix my oil cooler but accidentally stripped a bolt. It has been impossible to extract, so with all this extra time I have some more things to plan for. If you have any tips on getting the stuck bolt out they would be greatly appreciated. I run an Edelbrock supercharger and the bolt is on the fuel rails, I have tried drilling for hours and hours with reverse threaded cobalt drill bits and have zero luck.
@AutoEdits
8 ай бұрын
Sounds like you're doing all the right things... bummer... hope you get it!
@Rick-4552
8 ай бұрын
I have heard in my Jeep club of people having problems with the aftermarket thermostats on the 3.6 ? Its more expensive but I try to use oem parts as much as possible I have been bit by the aftermarket quite a bit! Another great video
@AutoEdits
8 ай бұрын
Yes, I would be more inclined to agree at this point with that advice 🤣 Thanks for being here!
@nilesdauphney5925
8 ай бұрын
Another great video. Very well done. Great job! Love your content, keep it coming please!
@AutoEdits
8 ай бұрын
Thank you! Will do!
@Brother_Lander
8 ай бұрын
I did this job on my old 2017 in 20° weather....twice. Both times, I finished, and it dumped coolant. I also used the doorman aluminum housing. Third time was when I found out I had some warranty I had forgotten about, and the dealer did the job under warranty. Not sure what the problem was when I did the job. There were no obvious o ring or seal issues. I sold the jeep a few months after that
@AutoEdits
8 ай бұрын
Yikes!
@Brother_Lander
8 ай бұрын
@@AutoEdits yikes indeed. Never have I missed living in Southern California in my life
Пікірлер: 399