Hi, 20+ years as an appliance tech and 10 as hvac tech. Question: Why didn't you fill the system with nitrogen when checking for leaks? Had you found a leak, you would've had to recover all your refrigerant to fix the leak. I've always done it that way... I realize your way is faster IF there are no leaks. But if there is a pinhole leak in the solder, the nitrogen can just be quickly vented into the atmosphere, then you fix your leak, and then put fresh refrigerant in.
@boondock6055
10 ай бұрын
Less experience lol
@ajcastellon5903
9 ай бұрын
This is how I was taught. Not only that, itll flush contaminants out as well.
@garza7676
4 ай бұрын
@@ajcastellon5903 nice job 👍🏼
@mc1412007
3 ай бұрын
Never did small apliance but i was tought if it pulls below 500 and holds theres no leak. I mostly use Nitrogen during braizing
@seasidescott
3 жыл бұрын
Our compressor was still working so brazed on a valve and replaced R134a (it's only 5 oz which is less than half a can you can get for automotive AC) and it's been working well for the last month.
@devoncrampton5223
2 жыл бұрын
my compressor is still working too, i have bullet valves and gauges coming tommorow, im hoping thats all the issues
@seasidescott
2 жыл бұрын
@@devoncrampton5223 Using the gauges for high and low is usually a waste of time. What matters is the weight of refrigerant you put in.
@lancesmith6864
Жыл бұрын
@@seasidescottonly it’s not. You add the weight (or not) depending on your pressures.
@chadparker9823
Жыл бұрын
Thanks for the confidence boost. Compressor is on the way and I'm buying a new filter dryer.
@rickwmson
2 жыл бұрын
Thank you for sharing this video...I have the exact refrigerator and the compressor has failed. It is under warranty, but it is good to know what will, and should, be done. Thanks again!
@ErichCervantez
Жыл бұрын
How long did you have your refrigerator before it failed? I have this exact same fridge as well. Have had it for 7 years now. Just died yesterday. Such a great fridge too.
@AutismusPrime69
Жыл бұрын
@@ErichCervantezthese are lg linear compressors....they are lg science projects that have really bad service life. If your replace it tap condenser fan com lines and use relay between them and a standard compressor.
@All-about-everything
7 ай бұрын
We had this fridge. It also failed. Garbage.
@All-about-everything
6 ай бұрын
They all fail on this fridge. Ours did too
@celebrityfanta1554
9 ай бұрын
I need this done for a fridge I have. How much would it cost if I have the compressor I only need the labor and the valves. Thanks great video.
@garza7676
4 ай бұрын
Does it matter what direction you put the filter drier ? Or is there an arrow for flow ?
@benerini
Жыл бұрын
Can you provide a list of everything that you used. As if you were telling someone what to buy if they wanted to go into changing compressors?
@MarkWilliams-b8g
4 ай бұрын
Hello, did he leave a List of all the tools etc… he used
@MarkWilliams-b8g
4 ай бұрын
I want to buy those items my son and I fix friges and freezers
@SkyNetGeek
Жыл бұрын
What happens if I don’t update the main board when installing a new compressor?
@Enonymouse_
2 ай бұрын
Controller may cause the compressor to malfunction or shorten its life, TLDR: if it needs it, always do that step.
@whenifeellow
3 жыл бұрын
I have the same POS model fridge and will need my compressor replaced. The compressor is under warranty, but the labor is not. How much do charge to do the replacement?
@TheFrenchPug
Жыл бұрын
$600 on up. Sears will screw you.
@TruongNguyen-fc2hw
Жыл бұрын
I just got a quote from Sears for $1327.26 compressor and drier replacement. 5yr old Kenmore
@richardmiller3808
3 жыл бұрын
No micro gauge? How do you know you have a dry system? Or do you know what a dry system Micron reading is?
@willytorres5506
Жыл бұрын
500 microns?
@acomman77
Жыл бұрын
If you don't have a micron gauge vacuum for at least an hour
@nadimammari7688
2 жыл бұрын
In regards to the software update, is it with the LG software rewriter kit? Given the fridge is a Kenmore fridge is it correct to get the LG software update? Our compressor just went out it’s an LG compressor in a kenmore fridge and the sites all say our compressor has been replaced by a newer model but it also requires updating the software with the LG software rewriter…doesn’t make sense to me since the fridge is a kenmore fridge
@TheFrenchPug
Жыл бұрын
LG made the Kenmore Elite (total crap) refrigerators when they sold them.
@strictlydubai
3 жыл бұрын
Thanks , how much would such a repair cost and any guide to diagnose as I have the same model , compressor seems to be working but no cooling , can’t seem to diagnose the issue before replacing or going for the big repair , appreciate any help , thanks
@whenifeellow
3 жыл бұрын
I have the exact same model and problem. The compressor comes on, the fan to the right of the compressor turns on as well. The fans inside the unit are blowing, but not cold enough. I'm sure you heard about the LG compressor recall? The Kenmore uses this LG compressor. It has 5 year warranty for the part, but not the labor to put it in. This guy says it's easy if you have the tools. Yeah, most average people, me included, do not have the tools used in this video.
@rhemamachaira8763
Жыл бұрын
So two of the compressor lines are NOT copper? Needs flux then?
@fredsanchez311
28 күн бұрын
Hi , How much is the cost or vacumming and charging the system with roughly the 5 OZ? Thanks
@elratingtelevisivo7910
Жыл бұрын
Hi how are you? i have a question if i have the same old compressor 220v 60hz R134a inverter GL and i wanna buy a new one but not inverter. Which compressor you do think is good ? Thank you!
@russwoodgate3095
6 ай бұрын
Where did you get the update program and device to upload the updates? Is it available to buy?
@avsararas
2 жыл бұрын
Very good video, BTW do you know why compressors on fairly new and good branded fridges go bad? What are the common causes for this? I think compressors are built to last normally. Thanks.
@V3VoVo
2 жыл бұрын
All new stuff is like this. Only one answer: Cheaply made in China, Mexico, etc under poor QA. I love old stuff when company took pride in their products. Nowadays it is all about profit. Nothing lasts… from cars to electronics to furniture to whatever you can think of.
@stevejessehallman
2 жыл бұрын
@@V3VoVo You nailed it! Great answer. If you can find something made in the 70ties or 80ties it will outlast any thing out there. We bought a new samsung microwave. It was worthless one week after the warranty expired. I will never buy another samsung anything.
@504Diva
Жыл бұрын
@vcubed7275 not only is the craftsmanship poor, but the new age repairmen really don't know their craft. One or two test and they say you need a new computer board or buy a new fridge. Hard to find people like the poster of this video. My fridges compressor is out and only 3 yrs old 😢
@uncontrollabledogs3791
Жыл бұрын
@@V3VoVo10000000% true
@whatleft123
Жыл бұрын
It isn't poor craftsmanship, it is specifically designed to fail. I tore apart three Copeland compressors and they all had the same failure, so I reached out to the company and told them, hey if you make this part more durable the compressor would last a lot longer. They said, we know. They want it to fail so you need to buy another one.
@rrshoeing
2 жыл бұрын
Hi great video. How much do you charge? I have a Lg and have to get the compressor replaced. Thanks
@mistyrusso6034
Жыл бұрын
I asked the same question with no response
@mistyrusso6034
Жыл бұрын
I asked the same question with no response
@TheFrenchPug
Жыл бұрын
It's $600 and up if you get the compressor for free. But even if you do, they're still charging you full price like it wasn't covered. A local guy here will do it for $800 total. Parts and Labor. The compressor is $330. So the rest is labor, freon, solder, butane, and that stupid $125 control board updater. I'm so glad I didn't buy the 5 year extended warranty. Mine broke down 6 months after it would have expired.
@rajprajapati2309
18 күн бұрын
In this sealed system, can refrigerant escape over time?
@HVACENGINEER94
5 ай бұрын
Shouldn’t you compress it with nitrogen and do a sweep charge first?
@bismalsanchezperez5754
Жыл бұрын
I have that same refrigerator and I have to change the compressor. I live in Miami, they don't have a team working here!
@TheFrenchPug
Жыл бұрын
Another company is honoring and servicing these units to continue to gouge every customer possible. This has happened to every single one they sold.
@cefgil3905
5 күн бұрын
What type of brazing rod are you using?
@vogeldp
3 жыл бұрын
When you work on dual evap LG's which Service Manuals do you use> The one I downloaded from the internet for my LFX31945ST does not have the correct info for checking or replacing the Ref compartment evap fan , it only refers to a single evap system and the fan in the freezer for the ref. compartment. Is there any supplement pages for this manual I could find? Keep up the great videos and info you provide to us.
@jc2367
7 ай бұрын
what brand refrigerator do you recommend?
@paulkoscheka4434
2 жыл бұрын
That video is well done! However, after watching, I h scheduled an appointment with Sears to replace my Kenmore Elite Refrigerator compressor.
@rbljackson
Жыл бұрын
So much for elite huh...im watching this video because our 2015 Kenmore Elite compressor failed today. If I may ask, how much was the repair for yours? Im trying to get an appointment scheduled. Thanks!
@paulkoscheka4434
Жыл бұрын
@@rbljackson A 2015 Kenmore, Great Refrigerator and worth replacing the compressor! The compressor unit is expensive but covered by a 10- year warranty. Installation was about a 1,000.00, but the service guy suggested I purchase a Service Contract and the repair would be about 400.00. I entered the Sears Contract for 50 per month which covers all appliances. After 30 days the contract is cancellable, however, my refrigerator ice maker is broke and that was covered by the contract. I recommend getting that compressor replaced as the newer units I looked at just are not as good as that Sears Elite. It did take a couple of weeks to get the service done, in the meantime, I purchased an ice chest to keep food cold. Yes, an inconvenience, but it all worked out!
@TheFrenchPug
Жыл бұрын
@@paulkoscheka4434 I heard that one person canceled the Home Warranty after a couple months and they went after her for the full amount of the discounted repair.
@TheDroppedAnchor
10 ай бұрын
I just got off the phone with Sears. I will have to wait two weeks for a repairman. The monthly cost of the home warranty is $65 a month. I scheduled for the sears repairman but am exploring other options.
@paulkoscheka4434
10 ай бұрын
@@TheDroppedAnchor Yes, inconvenient! I will say that Sears does a good job installing the compressor, mine has been working great since the install. Do what you need to do, I think I waited two weeks and bought an ice chest to help keep food closed.
@ForexTraderJohn
2 жыл бұрын
How much did you charge dollar wise?
@ritufinavia9067
2 жыл бұрын
I need to change Kenmore invertor Compressor LG FLB075LBNA so if I'm changing compressor with the same series than I still have to change/install the software?
@SkyNetGeek
Жыл бұрын
Did you ever figure this out?
@mission1627
Жыл бұрын
How can I get that device To update the software.. where can I purchase it ?
@TheFrenchPug
Жыл бұрын
From LG. It's $125.
@MinamiSen
3 жыл бұрын
The LG compressor has a law sue going on, you don't know how long will that last by replacing the same LG model. Is that worth it?
@zuko19987
2 жыл бұрын
There’s universal compressors that replace the oem compressor
@randallsemrau7845
3 жыл бұрын
No nitrogen purging before soldering? Guaranteed service call in 5 years, right?
@seasidescott
3 жыл бұрын
no, the system is quite small and with a hot torch seals quickly, compressor comes purged so no residual oxygen within.
@randallsemrau7845
3 жыл бұрын
@@seasidescott The connections at the compressor were soldered while exposed to oxygen internally. You've provided zero evidence that oxides did not form internally, which happens in 100% of cases where no oxygen purging takes place.
@tommygoldman05
3 жыл бұрын
Its also a good idea to purge with nitrogen because that system gets clogged with oil when the compressor goes
@seasidescott
3 жыл бұрын
@@tommygoldman05 Thanks Tommy. So you mean using the nitrogen to flush the lines, I take it. To blow them out. Probably especially when you have those long capillary tubes. But won't the oil just get spread out to later puddle up again and create blockage later?
@seasidescott
3 жыл бұрын
@@randallsemrau7845 Density of air at sea level 1.225 kg/m³. Density of nitrogen 1.165 kg/m³. Density of 134a 4.25 kg/m³. Nitrogen has 1/4 the density to prevent intrusion of oxygen whose density is 1.429 kg/m³
@russmeister2853
Жыл бұрын
I have another dryer on the intake line....the copper line on the bottom there is a small copper "can" that looks like a short fat version of the dryer you replaced. It sort of resembles a fuel filter. I didn't see you replace that.
@josephbatista828
2 жыл бұрын
How much does it cost to get it replaced?
@TheFrenchPug
Жыл бұрын
$800-$1100 parts and labor.
@tamiep5143
3 жыл бұрын
excellent video and very detailed and professional.
@isaacogedegbe5557
2 жыл бұрын
That sure is correct..
@ChrisCosmo808
3 жыл бұрын
two questions... 1) which way should the arrow on the filter dryer be facing? 2) which version of the JIG is used for this compressor?
@zuko19987
2 жыл бұрын
If you’re using a drier with an access point, the side with the access point always goes to the Yoder loop. But you always want the arrow on the drier going the same direction as the Yoder loop. If reversed it’s probably gonna clog
@jamesguralski5156
3 жыл бұрын
I just picked up a Kenmore elite for 100$. It needs the compressor, dryer, and charge!
@CanasiansFTW
2 жыл бұрын
Did you ever get that done, if so how much?
@TheFrenchPug
Жыл бұрын
It's about $1000 to get done.
@LeLa-Random
Жыл бұрын
Did you go from a FLB075LBNA to a FLS075LANA? Compatible?
@karenwilliams3882
9 ай бұрын
Good video, very informative. FYI the background music is kinda loud and distracting. 😊❤
@gsr2envy
Жыл бұрын
What does a typical compressor replacement cost?
@TheFrenchPug
Жыл бұрын
These are $800 and up.
@davidvaught586
2 жыл бұрын
Should have brazed service port then trickled Nitrogen and finished other joints. Pressure tested with dry nitro then vacuum.
@AutismusPrime69
Жыл бұрын
Should coulda wooda.....it's a refrigerator....this will work just fine. Not a space shuttle.
@ZIAMustafa-l3f
7 ай бұрын
i have daewoo frs 2021IAL, compressor need to be replaced, if we replace the compressor with the new one will it work or need any programming for PCB?
@foreverday6255
2 жыл бұрын
What's the cost for replacing compressor?
@TheFrenchPug
Жыл бұрын
$800
@dhrayo05
11 ай бұрын
Hello, was it not necessary to use the system updater?
@BiLoSellHigh
Жыл бұрын
I have an issue on Bull outdoor mini refrigerator, with 600a, 1.02 Oz of charge , which tool would i need to buy to check the charge pressure ?
@VooDooV6
Жыл бұрын
How do I eliminate the inverter compressor, rather just use my nice French door fridge with a 120v r134a compressor ....I do commercial hvac...so I'm up to the task...any guidance of how to.eliminate the board or use the hoard to call my 120v compressor to come on...thanks
@TheDandy1122
10 ай бұрын
Whats the price to change out a compressor just like that one???
@TheDroppedAnchor
10 ай бұрын
My Elite refrigerator compressor has failed after four years. I've been told it's $8-900. I do know the compressor itself is $375
@mickrogers7362
2 жыл бұрын
No reprogramming the board so the compressor runs correctly?
@tclodfelter8789
2 жыл бұрын
Great video...wish I HAD all the tools you do! LOL
@LeLa-Random
Жыл бұрын
So An FLB075LBNA can be replaced with an FLS075LANA ?
@Brandon-lh2ku
Жыл бұрын
No oil? I'm accustomed to cars. Those are larger systems, but I expected some oil aside from any that is already in the new compressor.
@Ashraf7X
8 ай бұрын
how did you figure out it was compressor issue
@Lone-Wolf87
9 ай бұрын
When you checked for the amount of R134a in the first refrigerator that you open was full of food. The last refrigerator that you showed when you opened it was completely empty. What's up with that? Why are you showing a different refrigerator?
@SETH0341
Жыл бұрын
My upright freezer compressor is running supee hot and not in a freezing mode. I have replaced the start device.. Nothing. I have try the 3n1.. Nothing. What could be the problem?
@jcaleca60
4 ай бұрын
Bro sort of brazing you could have used stay Brite 8 with some flux😊 and you didn't say what kind of torch do you use I guess acetylene b tank but I see you use brazing rods😮 and you should mention the filter dryer goes on the liquid line AKA skinnier line😊 other than that great job
@Coverttrickster
Жыл бұрын
How did you make such a short flame coming from the torch? Mine keeps burning the surrounding area in the fridge.
@rickjames9256
Жыл бұрын
You have to get a different size tip.
@popaki9484
10 ай бұрын
You’re not located in South Carolina are ya? 😂 I can’t figure out what’s wrong with my fridge. Everything seems to be working but only warm air blows. Probably compressor is shot eh.
@andresdelacruz604
2 жыл бұрын
Excellent video SR thanks
@mistyrusso6034
Жыл бұрын
How much do u charge for this?
@TheFrenchPug
Жыл бұрын
$1100
@jcaleca60
2 жыл бұрын
Did you use 95/5 SoLDER
@Private-GtngxNMBKvYzXyPq
3 жыл бұрын
Excellent video. Thank you.
@jacobwood2187
Жыл бұрын
How come ypu only add charge through low side?
@Daddychill..
Жыл бұрын
That is the way to charge almost any system
@vadimtyutyunnik353
2 жыл бұрын
Why we need to update software on the control board? There is no communication between the board and compressor. It's just copper wings inside and mechanical part.
@TheFrenchPug
Жыл бұрын
I thought I saw an electronic switch on the side of it. Something has to control the compressor turning on and off like your AC, no?
@Ashraf7X
8 ай бұрын
how do you know the compressor not working
@kevinwonsetler3777
Жыл бұрын
Isnt it not worth doing this?
@paulnguyen4808
2 жыл бұрын
Very nice video thank you very much
@1984juant
3 жыл бұрын
Nice channel! By the way did you have to update the board?
@lovelyasshole17
3 жыл бұрын
Yes, it's recommended
@uncontrollabledogs3791
Жыл бұрын
❤ superb video all around.🎉
@mohinderkaur6671
2 жыл бұрын
Is that an oxy acetylene torch?
@offi_alberto_wong_cial
Жыл бұрын
great sytem, any update?
@ryanmartin3267
2 жыл бұрын
Could you provide part # for filter drier please? The one I purchased has ends that are too small in diameter.
@lonniesmith104
3 жыл бұрын
There's no question about not replacing filter dryer. You always replace when replacing compressor.
@motorcitywestauto4674
3 жыл бұрын
Im going to replace my compressor and filter dryer, but not understanding something. Mine comes down the back, and its pinched off. Not sure how that works... Ive done home A/C units and tons of auto units but first fridge. Just not understanding why its not inline and is just off to the side pinched off. Damn thing is only a year old and it quit already.
@MrNinjahiga
2 жыл бұрын
@@motorcitywestauto4674 it's probably coming back in from the Yoder loop
@shawbrothersgirl2740
3 жыл бұрын
I don't have a Kenmore elite I just have a regular Kenmore refrigerator is this installation guide the same for a regular Kenmore refrigerator which is an older model
@TheFrenchPug
Жыл бұрын
No. Kenmore Elites are made by LG. Different system. Crap!!! Mine just went out after 5 years.
@Saint696Anger
Жыл бұрын
@@TheFrenchPugyou know they will cover the parts just not labor @ LG not sure about Kenmore but it should be the same no?
@TheFrenchPug
Жыл бұрын
@Saint Anger Yeah. They did. But the freezer is still messing up. Goes to 0 degrees sometimes then back to 20 degrees. Tech is coming out today for the 3rd time.
@Saint696Anger
Жыл бұрын
@@TheFrenchPug I was supposed to have the tech come by today for mine and they claimed that he had a family emergency. I would fix it myself but that would wave the warranty
@AlexSanchez-gh8ov
3 жыл бұрын
How long are those hoses for your gauge
@Ureno69
2 жыл бұрын
Where are you located?
@chrisnguyenDQ2012
3 жыл бұрын
Hi Technician, can you install the LG linear compressor to my Kenmore Refrigerator?
@AutismusPrime69
Жыл бұрын
Unfortunately no
@engineeredappliancerepair2752
3 жыл бұрын
Thanks for the great video! Sealed System work is the ticket$$$ I'm learning.
@tclodfelter8789
2 жыл бұрын
It looks like you might want to answer some of the viewers questions...!??
@devoncrampton5223
2 жыл бұрын
can i solder instead of braze?
@AutismusPrime69
Жыл бұрын
I don't know...can you?
@lanbrick5826
Жыл бұрын
Nitrogen will purge any partials in the system! A must have doing sealed system work !
@donaldgirome5286
Жыл бұрын
I cannot find anyone in the repair buisness to replace our compressor. We live 30 minutes from Buffalo,NY
@TheFrenchPug
Жыл бұрын
Did you call Sears? They'll gage you but they are the ones who sell these.
@bigd835
Жыл бұрын
did you notice that Kenmore is now made by LG in this video ? Kenmore is no longer a premium brand. LG and Samsung get terrible reviews for their refrigerators for bad compressors.
@TheFrenchPug
Жыл бұрын
Kenmore Elite made LG not the Kenmore regular.
@felixarribas4207
Жыл бұрын
Bravo , 🇪🇸 saludos Spain.
@mauricem7007
2 жыл бұрын
I have that same POS fridge! The compressors are made by LG, and they are known pieces of garbage, yet they continue to sell them for top dollar with a useless warranty of just one year. There have been class action lawsuits and their solution is to just keep selling them but limit the warranty so they aren’t responsible for the service bill (about $1,000). Never buy LG, Kenmore, or Samsung appliances.
@easyon12
2 жыл бұрын
Kenmore used to be an excellent brand refrigerator until the company went out of business about 10 years ago. LG knew their fridges was junk so they bought Kenmore's name and started relabeling their junky fridges Kenmore, smart on their part but bad for the consumer (very unethical). Samsung fridges do has a lot of problems.
@mauricem7007
2 жыл бұрын
@@easyon12 exactly! 👌
@smitdiot1410
Жыл бұрын
Agreed.
@gerardoreveles3156
2 жыл бұрын
How much this job cost for everything ?
@kyushka.
2 жыл бұрын
500-1000$
@alejandrozometa1951
3 жыл бұрын
You forgot to clean the condenser and blow through the high side and clean out through the suction line as well
@katherinea.sinclair633
3 ай бұрын
I bought a house and it came with old refrigerator, washer and dryer and a fairly new piece of junk LG dishwasher. Guess what causes the most trouble my newest appliance my dish washer? I am keeping my older applainces until they die. Funny, I know seller gave what they thought was junk applainces.😂 Maybe the dryer was junk because it died but my inlaws gave me a free old dryer. I have lived in my house for 4 years and still havent had to pay to replace any appliances.
@andrewhenney
24 күн бұрын
Thank you.
@Mojo27564
Жыл бұрын
How much for a tech to do this kind of job
@Daddychill..
Жыл бұрын
1800
@Mojo27564
Жыл бұрын
This make NO sense why don't THEY just get a new fridge!????
@All-about-everything
3 ай бұрын
Why does this fridge compressor fail all The time.
@Bscottcoll98.
Жыл бұрын
Vacuum with core remover tool with Schrader out causes restriction on your vacuum
@Enonymouse_
2 ай бұрын
Flux on your solder joints is strongly recommended, that service valve is too long! You should not have to bend it.
@judithgarcia1154
3 жыл бұрын
How can I get your service ? I stay in Houston
@multi-wreckz712
3 жыл бұрын
Still looking for service?
@drgolfjim
3 жыл бұрын
Good work. THank you
@joeshumo9457
2 жыл бұрын
This is all wrong. I would only do it this way if it were the end of the world and it was for myself. I certainly wouldn’t pay for it. You didn’t flush and purge with Nitrogen. You didn’t braze while flowing Nitrogen. You didn’t purge the refrigerant tank line while connecting to the service port. You didn’t maintain a vacuum with shut off valves for a reasonable amount of time or long enough for all the water to be boiled off with new oil in the pump. You didn’t swage any of the line connections. You seem to not like cleaning the connections. No proper ventilation. No mention of the brazing material being used. No mention of line routing that is critical to the performance of the system due to its use as an evaporative assistant for defrost water and condenser performance. I could go on.
@mikemcleroy8265
Жыл бұрын
I need a Kenmore compressor replaced. You interested?
@zackwest4811
Ай бұрын
You should blow dry nitrogen before you charge to make sure there is no leaks
@Hicham-s8k
10 ай бұрын
How about brazing with Nitrogen, because if you don't, the system will clugged due to copper build up inside. Just saying.
@gampaha1861
Жыл бұрын
can Anyone please tell me copper to copper Filler metal name and copper to Aluminum Filler name?
@Daddychill..
Жыл бұрын
Silfos 15 for copper to copper
@jack23517
2 жыл бұрын
Test for leaks 1st with nitrogen then vacuum
@TheFrenchPug
Жыл бұрын
Correct!!!
@ipscone
2 жыл бұрын
Invest in a tripod. Awesome me duzzy
@babypototz5677
2 жыл бұрын
Shout out bos..❤️
@DevonishMurphy
6 ай бұрын
Oh gosh no hate man however that’s not soldiering that’s brazing there is a difference also nitrogen dude its your friend i know its just a fridge and not a industrial AC unit good repair though also try using fitting like reducers plier crimping is not the best way to get a better wetting from capillary attraction
Пікірлер: 237