www.laptopscre...
www.laptopscre...
HP Stream 14 screen replacement
This is a guide on a replacing a screen on the HP Stream 14
For the replacement process we'll need the following tools:
- a Plastic Pick
- and a Phillips Screwdriver
To begin turn off the laptop and disconnect the power cord.
Using plastic pick start unsnapping the tabs on the inner edge
of the bezel. Close the laptop and unsnap the bezel at the bottom.
Using a Phillips screwdriver remove four screws holding the LCD panel.
Place the screen onto the keyboard. Peel off the clear tape securing
the video connector. Disconnect the video connector.
Discard the old screen. Secure it with a clear tape.
Place the new screen onto the keyboard. Reconnect the video connector.
CAUTION! It is very important not to force any of the connectors.
You must not twist or slant the connector when plugging it in.
Lift the screen up and test the new screen.
The screen is working and we can finish the installation process.
Replace the four Phillips screws. Replace the bezel.
Start from the bottom corners. Press firmly and then go around
the perimeter snapping tabs back in place. Close the laptop and
make sure that the bezel is snapped in place in the bottom.
Turn the laptop on, and we are done!
Негізгі бет How to replace LCD Screen on HP Stream 14
No video
Пікірлер: 2