Remove and replace oil dipstick tube from my Ford Expedition EL 5.4L 3V engine. My oil dispstick tube was broken, it had a crack in the middle of the tube. It was also rusted and the tube was stuck to the engine block. Follow along to see the method I used to get the rusty oil dipstick tube unstuck using a propane torch and rust penetrant oil. I also show how to install new oil dipstick tube in Ford 5.4L 3V engine. Can be done without removing oil drain pan. Just requires lots of patience and a propane torch.
As an Amazon Affiliate I earn from qualifying purchases.
Tools and Parts I used for this job:
Oil Dipstick Tube - amzn.to/455THj9
Replacement Dipstick - amzn.to/3rms7QN
1/4" Flexhead Ratchet - amzn.to/3PQaL8n
WD-40 Rust penetrant - amzn.to/3LBa9Rj
Self igniting propane torch kit - amzn.to/3PvN2IX
Blue shop towels - www.amazon.com/dp/B07F3WLKCP/...
Large 8mil Nitrile Gloves - amzn.to/3rovLtq
Негізгі бет Тәжірибелік нұсқаулар және стиль How to replace Oil Diptstick Tube (Cracked, Broken, Rusted Stuck) | Ford Expedition EL 5.4L 3V
Пікірлер: 42