do you really need to disconnect the steering rack? , I removed the 6 (18mm) bolts, loosen the control arms, but my subframe still not moving. any suggestions?
@nyajilacs
3 жыл бұрын
I also replaced the oil pan gasket with DIY. I followed the same procedure as this video and was able to replace it without any problems. Thank you for the video.
@nyajilacs
3 жыл бұрын
@@YORI-TV Hello, I lifted the engine with an engine hanger. If you want more information, search on the astroproducts engine holder.
@bigdeal87
3 жыл бұрын
@@nyajilacs did you also drop the subframe? Thx
@nyajilacs
3 жыл бұрын
@@bigdeal87 Yes, I have dropped the subframe. When I actually worked on it, it wasn't too hard.
@bigdeal87
3 жыл бұрын
@@nyajilacs ok did you lose only the subframe bolts or the wishbones as well? And is it necessary to losen the steering column? Thx
@nyajilacs
3 жыл бұрын
@@bigdeal87 Before loosening the subframe bolts, first lift the engine with the engine holder. Next, remove the bolts such as the air conditioner, optical axis sensor, and wishbone as shown in this video. In addition, free the tilt steering lever. Do not loosen the steering bolts. When lowering the subframe, loosen the bolts little by little and check that no excessive force is applied to the pipe.
@OilBaron100
3 ай бұрын
Thanks for posting. Very well made camera shots and angles. Must've been difficult to film. Helpful for me.
@TheAubizzo
4 жыл бұрын
this is a very nice video. i couldn't find one for e90 N46b20
@grantmckenzie1994
4 жыл бұрын
did you have any luck with the repair? Im going to be doing mine soon and need maybe some tips
@WayToManyAssassins
Жыл бұрын
Do you really need to drop the whole subframe?
@OilBaron100
3 ай бұрын
I tried to remove the engine-oil pan by raising the engine in the engine bay, but the pan will not maneuver out. Subframe needs to be lowered.
Пікірлер: 16