Thanks for the lessons. I’m new to rc, I’m starting a club for the youth in my community and your videos are very helpful. ❤
@Jointon40
Жыл бұрын
Thank you so much I had problems with my other receiver cause it didn’t go as far as it was supposed to and now that I watched your vid I switched it and it worked thank youuuu
@RcKingz
11 ай бұрын
AWESOME! Glad it helped and thanks for watching!
@realworld4740
7 жыл бұрын
Nice video nick!! I just went through this and blew the receiver! Putting the wires in the wrong spot! I didn't look at where they were! This was a great video
@RcKingz
7 жыл бұрын
Thanks bro! Yea it's important to know where you're placing the leads... There's a few low voltage ports! They're not too expensive to replace, but if you can avoid it, it'll save you a few bucks! Thanks for watching bro and thanks for the love!
@cripplekid0902
6 жыл бұрын
Omg, I was trying to do this on my own for soooo long, it would never work, this video saved my life, thank you so much❤️
@RcKingz
5 жыл бұрын
Thanks for the comment and support! This is exactly why I make these sort of videos! Thanks!
@JCSteinmeyer
4 жыл бұрын
I’m about to replace the receiver in my boy’s Rustler 4x4 tomorrow because we broke the antennae. My first time attempting this. You video was very helpful!!!
@AMAZINGRC
7 жыл бұрын
Great how to video...!!! Very informative...!!!
@RcKingz
7 жыл бұрын
AMAZING RC thanks bro!
@allenslanding9485
5 жыл бұрын
Thanks, that's exactly what I needed to know!
@ono522
5 күн бұрын
Man!! Great video keep it up
@lonnieferguson7481
Жыл бұрын
It helped me thanks
@RcKingz
11 ай бұрын
You are most welcome! Thanks for watching
@stevealcorn9374
Жыл бұрын
Thank you
@TRACTORS45
7 ай бұрын
Thanks so much dude
@aristojose5754
11 ай бұрын
the way i remember it is 1 to turn 2 to burn as far a the channel goes
@mujtabaqadiri8383
17 күн бұрын
What tool are you using? Because I’m having somewhat same receiver issue , don’t know with what tool to open my rustler XL-5 receiver box
@JeorgeJetsin
4 ай бұрын
How do you pair these receivers to the remote Though? that's what i'm trying to figure out
@livinglifemyway7349
6 жыл бұрын
What does channel 3 and 4 do?
@christopherparsons1920
Жыл бұрын
can you show how to set up an RC4GS v3 remote to my 2wd stampeded?
@_Tang0_
4 жыл бұрын
Do you recommend aluminum shocks? Or should i stick with factory stock ones? Im new to RCs and just wondering if its worth the $. Anyway, great video. I flipped my rustler over and the tip of the antenna tore off so I’ll be using this video to replace my receiver. Thanks for the upload!
@cedugan7090
Жыл бұрын
Please help! I have a Traxxas rustler vxl3 I downloaded the link Let it do its thing on my phone and with the reciever, now my esc doesn’t turn on when you press the button, or rather the light doesn’t come on. I have steering no throttle but the link app says it’s all green and linked up, please help
@Ek-zv1db
2 жыл бұрын
Hey bro I was wondering does it change the speed at all if you get a better receiver
@codyalt5871
6 жыл бұрын
How did you know your old receiver was bad?
@blindj
5 жыл бұрын
You can always get additional screws much cheaper at home Depot or any hardware store they are mostly m3 screws. At my home Depot I can buy 4 m3 x 10mm for a 1.22. hobby shop usually charge five bucks for a pack of four screws just because it says Traxxas on it
@RcKingz
5 жыл бұрын
Thanks for the comment! I'll definitely look into this!
@CodySmiley
3 жыл бұрын
Can I replace the radio with Frsky and put it in the traxxas model? Is it possible to read telemetry on another radio?
@brianmullenax5417
3 жыл бұрын
Are you going to link them that's what I'm trying to figure out how to link it
@cartere9981
2 жыл бұрын
My receiver is so stuck to the box I'm just gonna have to get another box
@RcFunDrizzy
7 жыл бұрын
Nice how to bro 👍
@RcKingz
7 жыл бұрын
Thanks bro! Appreciate it!
@kingofkards1110
2 жыл бұрын
What remotes work with traxxas esc?
@harsh3827
5 жыл бұрын
Hey man, thanks for the video. My ez set keeps on blinking green and red continuously. Do you know by any chance what it means?
@hurricone4170
3 жыл бұрын
Search on KZitem I had the same problem
@Aiden-mj6dz
6 жыл бұрын
Will I need a new receiver
@davekazmierczak7829
4 жыл бұрын
Anyone no if or were I can find 24mhz Crystal's for my 27 mhz stampede?
@blacktahoe6409
4 жыл бұрын
Dave Kazmierczak eBay
@KKPlayz10
4 жыл бұрын
traxxas cars are ok quality. They use too much plastic in the but then the motors are quality. Nothing is high quality in it. Even the suspensions arms are plastic. And I can't tell if the output or drive gear is made from nylon or metal not a big deal however. Not only that but the transmitter is very unresponsive. If you don't care about waterproofing, just replace the reveiver yourself. Not only that but there is way to much chassis flex because of all the plastic used. It doesn't even feel premium like the abs lego uses.
@aaronthomas4683
4 жыл бұрын
Metal a arms are a bad idea for any rc car. It’s the weak link in the whole suspension. It supposed break if not the next thing would be the whole cassis.
@sumitkapur9479
4 жыл бұрын
@@aaronthomas4683 why not I would pay extra for a full metal or plastic with metal roll cage chassis
Пікірлер: 43