The following video should help DIYers complete this power steering pump replacement at home with ease. PLEASE PLEASE BUY A PUMP WITH THE PULLEY AND RESERVIOR ALREADY ATTACHED!!!! link: www.rockauto.c...
Tools you will need:
-15mm socket on a breaker bar (to get the drive belt off)
-Drip pan
-Needle nose plyers (to remove the tube attached to the reservoir)
-Jack and jack stands
-5/8 inch open ended wrench (for the high-pressure line on the pump)
-1/2 socket with extension (for the three mounting bolts that hold the pump onto the engine, these can be accessed through the holes in the pulley)
My apologies for the camera issue. I promise you, you didn't miss much. There's really nothing to taking this pump out, it's very easy. As long as you buy the pump I linked above in the first paragraph then you'll have no issues with leaking and it'll literally be "plug an play". Just make sure you don't overfill the reservoir during the burping process, if you do you'll end up needing to pull the drain line off again to remove fluid or suction some of it out.
Негізгі бет How to Replace Power Steering Pump 2005 Dodge Dakota 3.7L 4WD
Пікірлер: 16