Thanks for skipping over the handbrake reassembly. Cheers mate
@jakethesnake1976
8 жыл бұрын
Nice vid, could have had more detail of the reassembly of the hand brake shoes though. Also need to adjust shoes by locking on till it takes 60Nm to turn hub out then back adjuster off 1 complete turn or 8 clicks 👍
@lynalllynall9082
3 жыл бұрын
That is because the build back up is an arse job!
@bigbertha98
3 жыл бұрын
Well done…skipped over the hardest bit as if voila….it jumps back on by itself.
@jamesbaker8571
6 жыл бұрын
Don’t forget the bedding in procedure for new shoes. Involves putting the handbrake into a mode then driving and applying the handbrake a number of times. More info online / forums. Otherwise great video.
@andyg8651
8 жыл бұрын
Great video really helps with inner working of the handbrake shoes thanks
@thethrottleshed
3 жыл бұрын
I notice on rebuild the shoe adjuster is the opposite way around to when you was stripping down, hope you noticed and rectified, I have just assembled mine but have a small spring left was looking for the spring assembly which you have skipped from your video. I have fitted the 2 main springs top and bottom really don't know where this small one is from!!?
@Tencent
8 жыл бұрын
Great video. I think you put the adjuster in the wrong way. Does that matter? Look at 2:30 and then at 6:13. You'll see the difference.
@markoutside1
8 жыл бұрын
Also don't forget to put handbrake into service mode: turn key to position 2, push brake pedal down three times, hold down the last time, and then push down on handbrake switch for 5 seconds. I'm not totally convinced that it makes a difference, but its supposed to ensure that the handbrake is totally released so that the adjustment is done with the cables at their loosest.
@steveshih4622
Жыл бұрын
Thanks for the intuitive video. Can you tell me how long this job will take just to replace the rotors? Thanks.
@mikebryan544
4 жыл бұрын
I was only watching for reassembly
@prabhjitsingh3298
4 жыл бұрын
Lmao same here
@prabhjitsingh3298
4 жыл бұрын
And dude did it in split second
@jamesray3920
Жыл бұрын
Eveone mostly who makes video never shows one to me important step is the flat metal that has a spring put on it some people use a IP tie or something to install it if I was demonstrating how to reinstall e brake shores I laid it on with all parts on a table to show how everything looks as a dry fiitng before the real installations its the little details left out the most important
@danielvasile6318
2 жыл бұрын
Why the adjuster is turned when all are replaced and put back, please? Is that an issue when you are trying to find the inspection hole?
@H_A_F_GAMING
4 жыл бұрын
hello I have a amber parking brake light that wont go away. my parking brake works fine so i was wondering if the parking brake shoes have a sensor that is signifying they are low?
@joseglez6090
2 жыл бұрын
No explicas cómo lo colocas de nuevo, das un salto y ya lo tienes colocado, me interesaba ver si daba trabajo el colocar las cintas de freno otra vez....
@ksasbr107
8 жыл бұрын
Hi ✋🏽, thank you for the video , minute 01:50 can you explain more , i didnt understand what you did , can you show exactly what you did and why ., my english bad ..... This is the only one video in youtube about epb change . Thanks in advance
@TheBolacreen
6 жыл бұрын
Great video, appreciated
@kennethfreeman1448
9 ай бұрын
Calliper wind back tool couldn’t see it
@ksasbr107
7 жыл бұрын
Hello , what is the best air tool for house mechanic ?
@leadds
7 жыл бұрын
You literally go so fast on the bottom you don't let anyone see how the bottom spacer is set
@shirleyschulz7811
2 жыл бұрын
Of course, you skipped the one step I needed to see... putting the parking brake shoes back on against the spring tension. Everything you showed was obvious.
@kansanbrit1
3 жыл бұрын
Useless. The only difficult piece is conveniently skipped over !!
@fqanvlizad1482
2 жыл бұрын
Maşını təmizləsəniz lap yaxşı olar dərin təmizlik lazımdır siz maşın saxlaya bilmirsiniz
@dancardancarshauler8719
2 жыл бұрын
It's wrong wrong somebody did the job for him he never show how he installed it? Yeah I just watch these you up and you doing the wrong job wrong it's a fake video the guy don't know how to do job I'm a real mechanic and I see he's all mistakes all he did just take it out anybody can do the but how you install it you never show people how to put springs tensioner back so please delay this video or redo it and show people though true story.
Пікірлер: 28