√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@nathansmith4783
9 жыл бұрын
Just completed my first successful brake job on my Maxima thanks to you guys and this video. You just saved me a couple hundred bucks, and more in the future. Many thanks!
@1AAuto
9 жыл бұрын
Thank you for watching! Glad to be of help. Please let us know how the repair turns out. 1aauto.com 888-844-3393
@genepeters1529
9 жыл бұрын
Greetings It's a new world, with quality, detailed, readily available information like this. In a few minutes I got exactly the info I needed to finish the job.
@1AAuto
9 жыл бұрын
Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393
@drink15
11 жыл бұрын
Also make sure not to let the caliper hang from the brake line.
@FSX239
11 жыл бұрын
never let the caliper hang by the brake hose. always position it or support it in a way that doesn't put pressure on the hose. I like these videos from 1Aauto and the prices competitive. I've been purchasing from them for years with no regrets. thanks guys
@RonaldDavis-to7yl
25 күн бұрын
You guys are the best
@401Impala
10 жыл бұрын
Also, it would make more sense to apply the grease to the back of the pads once you've put them back in the bracket.
@Preach22
2 жыл бұрын
Amazing engines ashame how so many have become rust buckets
@401Impala
10 жыл бұрын
If you dont have a caliper tool, you can use a C-Clamp. Also, take the cap off of the brake fluid reservoir, this will release pressure build up in the reservoir making the caliper easier to reset.
@401Impala
9 жыл бұрын
P Mac BS. I've done it myself. If it "needs" to be rotated do contract then how does it contract when you let your foot off the brake pedal? ... Exactly.
@machinis
7 жыл бұрын
EPCOT NERD I'm not sure if that statement is accurate. I tried to use a c-clamp today on the rear brakes, but was unsuccessful at resetting the cylinder.
@CORZER0
5 жыл бұрын
Untrue on both counts. You should remove your comment. The rear caliper piston requires to be screwed back in with the tool used in the video. A C clamp will not accomplish this. The reservoir cap has a breathable rubber baffle that extends with fluid drop making it unnecessary to remove the cap. You are the reason the internet is 99% BS.
@noladol
5 жыл бұрын
The rear calipers need to be turned. The front calipers you can use a c-clamp. You can also turn the rear calipers with needle nose pliers or something else.
@scottbullock4364
4 жыл бұрын
Is it possible to do a video of the hand E-brake cable replacement for this model vehicle having some trouble replacing mines
@1AAuto
4 жыл бұрын
+Scott Bullock We're always cycling through common cars. We'll add this repair to our list! 1AAuto.com
@hk20000
2 жыл бұрын
The brake hardware kit comes with a 3rd piece of diamond shaped metal, but I don't see that being installed here. What is that all about?
@jdsjds7935
Жыл бұрын
What do you mean notches up down left right ... Guess I'll find out tomorrow
@anaphylastiks
6 жыл бұрын
I had the hand brake on, to get the wheel nuts off but then released it. I can't seem to get the caliper to reset. Plus the caliper housing was really hard to get off. Any suggestions? The caliper doesn't even want to turn.
@alangriff1
2 жыл бұрын
I'm not so sure about the torque figure you quoted. One of the 14mm bolts that holds the caliper on snapped when I torqued it up. Very annoying. Lucky I had the 'Ezi out' to drill it and extract it. Thankfully my local wrecker had some more.
@savvasstergos7175
3 жыл бұрын
You can just open bleeder valve and push piston back in
@Diemos879
4 жыл бұрын
I checked my brakes on my 01 Maxima, they look fine but sound very dry and squeak at times. Could this be the brake fluid?
@1AAuto
4 жыл бұрын
+payne Thanks for watching! Low or contaminated brake fluid can cause braking issues, but not usually brake squeal.
@mysticlegendvlogs4959
3 жыл бұрын
What kind of screwdriver is that you used with that caliper tool
@D3Man2012
9 жыл бұрын
I tried to reset my caliper but it won't budge, will taking the cap off of the brake fluid reservoir help?
@1AAuto
9 жыл бұрын
You may want to inspect the caliper and brake rotor to see if the caliper has frozen and needs to be replaced.1aauto.com 866-403-3393
@josesalavarria2088
3 жыл бұрын
My car rotor has a extension How to replace rotor with out the extension
@columbiariverdetailing1943
4 жыл бұрын
Dam I need to go spend more money on tools for the reset tool
@1AAuto
4 жыл бұрын
+Clean Freaks Automotive Detailing Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@D3Man2012
9 жыл бұрын
Hi good evening 1aauto Do you guys have a video or can you make one on how to change frozen calipers on a Nissan maxima 01? Thank you
@1AAuto
9 жыл бұрын
We currently do not have a vehicle to do a video on. We'll keep this request in mind, in case we need to make this repair in the future. 1aauto.com 866-403-3393
@Monstergcc
10 жыл бұрын
Good job
@billlathrop8764
6 жыл бұрын
Maybe this info will help somebody deal with resetting the 'piston'. There's a tool that can be found on eBay that's priced around $4 to $8. You can find them on eBay if you search eBay for "Rear Disc Brake Piston Caliper Wind Back Cube Tool 3/8in.".
@clarencedixon937
3 жыл бұрын
I OP 86r
@sasukespride8922
5 жыл бұрын
So how am I supposed to change the rear brakes if I cant have the car on park and am in a outdoor parking area?
@1AAuto
5 жыл бұрын
+Sasukes Pride We wouldn't suggest doing this yourself if you cannot secure the vehicle with the area and tools you have available. 1aauto.com
@sasukespride8922
5 жыл бұрын
@@1AAuto Thank you for your prompt response!
@edlvsgng
5 жыл бұрын
Chuck the front wheels and lift the rear of the car.
@XxIcybluexX
4 жыл бұрын
Y'all used up this poor car and can't even put a little paint o. Them for the video? SMH.🤣
Пікірлер: 40