√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@andaardvark4950
3 ай бұрын
Legitimately came in clutch, gotta pay attention to this mans technique thats the real key
@rickubik
11 ай бұрын
Best video for this job. Couldn't have done it without it.
@dogonit7412
2 жыл бұрын
Good job! Camera work was hit and miss at first ... then improved through the video to excellent. Very helpful tutorial ...thanks!
@clintontheross
9 күн бұрын
Oh man I’m dreading this job. So glad they mostly moved away from drum breaks.
@stevefranklin9920
2 жыл бұрын
Taking the retainer springs off and back on sure is easier with the proper tool! I learned from experience.
@AFVeteran1
Жыл бұрын
How did the back plates get so clean? Special cleaning or replacement? Getting ready to change out my 1995 K1500 rear brakes as I am not sure they have every been replaced and this video is very helpful. Thanks! Also it would be good to note these are the 10 inch rear brakes in the video as the 11.25 rear brakes are slightly different.
@D65STANG
Жыл бұрын
Great job great video Excellent directions thank you so much
@jzx4753
6 ай бұрын
5:28 best part
@scoutydoggers6998
9 ай бұрын
Thank you for the great video! Very helpful and informative
@joetroutt7425
Жыл бұрын
Great instructional video. Everything is clear to see and thoroughly explained. Can you please tell me if these were 10" or 11" brakes.
@acid360delta7
Жыл бұрын
I'm guessing you blead the brakes because you replaced the backplate? Cause I don't see a reason if it was just a brake pad/arm replacement.
@onassisahhaitty1330
26 күн бұрын
That spring at 4:11 is the biggest pain in my ssa to put back on I see why you skipped till when it was on cause ik it took a second 😂
@erichoward09
3 жыл бұрын
Im so glad i found this video this was a big help.
@TRQ
3 жыл бұрын
+erichoward09 Thanks for watching our video! 1aau.to/m/Shop-TRQ
@chrisv6604
Жыл бұрын
I use a piece of small clear hose on the bleeder fitting going into a bottle to capture the fluid while bleeding brakes. Getting brake fluid all over sucks
@TRQ
Жыл бұрын
+Chris V Thanks for the tip! 1aau.to/m/Shop-TRQ
@ChrisCrowley74
Жыл бұрын
I agree with a new video. You performed quite a few operations that were hidden behind other parts. A REAL PRO would have shot the scene AGAIN from the back side where things weren't hidden, then continued..... Otherwise, all good. This had me scared, now I feel a bit better if I could do them. I don't know what my size is - 10 or 11.5.....
@Underdogsteve509
9 ай бұрын
do you guys have the parking brake lever that the parking brake attaches too available?
@catdakman1273
3 жыл бұрын
Sure wished you included changing backing plates in your very good video !!!!! My truck needs backing plates too .......
@TRQ
3 жыл бұрын
+Cat Dakman Thanks for the feedback!
@teddrosenthal
3 жыл бұрын
Look at all that rust! That trucks is definitely up north!
@TRQ
3 жыл бұрын
+Tedd Rosenthal Thanks for watching our video! Our video studio is based out of Massachusetts. 1aau.to/m/Shop-TRQ
@eddietorres4110
5 ай бұрын
Great work!! 👌
@leiferickson713
3 жыл бұрын
Do you know that there’s spring removal tool for all that stuff
@TRQ
3 жыл бұрын
+Leif Erickson Thanks for the feedback! 1aau.to/m/Shop-TRQ
@gideonmalychewski7643
2 жыл бұрын
Do you know I saved $35 for using pliers instead of the removal tool for all that stuff
@sktrmns6
3 жыл бұрын
Can you guys do a better job of filming and showing things and explaining them as you go. It was very vague video, moved way too fast
@jamestyson-z1c
7 ай бұрын
E break spring will not go back for me to get it on just pliers are not cutting it what can I do???
@MrShiftey13
3 жыл бұрын
pretty cool video. thanks man.
@edgardosgavidia7462
Жыл бұрын
Thanks
@graysaw
3 жыл бұрын
What’s that copper spray
@sktrmns6
3 жыл бұрын
He literally said it was copper anti seize
@LawrenceGaudette-i8g
Жыл бұрын
Thank you❤
@Bingo551
3 жыл бұрын
Should have sprayed it down with brake cleaner before working on it. Poisonous brake dust.. Safety First.?
@z9brigade
2 жыл бұрын
He's wearing gloves
@amishadowbanned6264
2 жыл бұрын
Mine has 5 springs and looks different
@hernandez13x72
Жыл бұрын
My boy had the ling long tires 😮😂😂😂😂
@kevincarroll28
4 ай бұрын
Why skip when you put the new assembly on
@ChrisCrowley74
Жыл бұрын
You forgot to flip this
@TRQ
Жыл бұрын
+Chris Crowley Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
@kingpest13
3 жыл бұрын
Every time I pause I have to watch two ads. Pissing me off
@teddrosenthal
3 жыл бұрын
Helpful hint, some of us use earbuds, so, when you blast your air tools, I yank my earbuds out. End of your video for me.
@TRQ
3 жыл бұрын
+Tedd Rosenthal Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ
@jtjones73
3 жыл бұрын
Same here, a little volume leveling would be helpful.
@3ormorecharacterstimes2
3 жыл бұрын
LMAO when you get done crying that river go ahead and build yourself a bridge and get over it
Пікірлер: 53