√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@j.r.moparman2764
2 жыл бұрын
Thank you for keeping these videos educational & instructional only. NO background kids, pets or music is the best way to have no distractions interfering with important information.
@jtrok11
Жыл бұрын
You made reinstalling the clip look so easy. The new clip that comes with a new set of break pads isa lot more difficult than you might think. Otherwise, your video made me almost feel like I’ve been doing this for years. Thank you so much and keep it up! JT
@scottjohnson472
5 жыл бұрын
I appreciate that your cameraman will get underneath the car and down on the ground to get a good view of what you are showing us. VERY well done video, very informative.
@1AAuto
5 жыл бұрын
+Scott Johnson Thank you very much!
@danielbennett5283
4 жыл бұрын
Thank you for taking the time to show each step in a clear and realistic way. The guy doing the work explains the reason why he's doing each step. Very helpful. Thanks.
@1AAuto
4 жыл бұрын
+Daniel Bennett Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@samuelsanderson9692
5 ай бұрын
I have always done my front brakes on the wj. I have always thought the rear was too difficult or I needed a special tool. Probably because it looks different because of the clip. So I have always paid a shop to do it. Your video have me the confidence to do the job!
@user-sp7ef2tb3t
10 ай бұрын
Great video. Thanks for being so detailed and clear. I hadn’t ever replaced the rear brakes and rotors by myself before. It felt great when I finished. Thanks again for helping me so much with the video👍🏻
@smcgee2010
5 жыл бұрын
Great instructions, the task was made simple for a non-mechanic like me. 👍 I want pay for another brake job ever. ☺ Thanks for sharing your knowledge and video.
@1AAuto
5 жыл бұрын
+sterling mcgee Thank you for your positive feedback! We are happy we could help.
@pkturpin
5 жыл бұрын
Im not sure which spring you had but it took 15 min to change pads and 1 1/2 hrs to get that @@!@#$%%$ spring back on!
@ScorpioKing95
4 жыл бұрын
Your not alone!! Most frustrating brake job I have ever done because of that damn clip!! And it still makes noise!
@zorrbock
4 жыл бұрын
No kidding... I'm 2 hrs into the spring and finally came in to watch youtube. Obviously, it's simple. Look at this guy just tap it into place.
@Robert-sy2cy
4 жыл бұрын
Would have been a good time to rebuild or replace the caliper. The piston in this type caliper can later stick in the caliper bore after simply pushing the dirty piston back into the bore. The piston will move out when applying the brake but not retract causing the job to be redone on a later date and possibly having to replace a warped rotor.
@1AAuto
4 жыл бұрын
+Bob Kodadek Thanks for checking us out and the feedback, we appreciate it! 1AAuto.com
@victormendoza6306
Жыл бұрын
Good job 👍 thank you very much for let us know the right way to replace it
@alansauer6853
5 жыл бұрын
I'm going to do the rear brakes today on a 03 cherokee. I yhink this video will be very helpful
@1AAuto
5 жыл бұрын
+Alan Sauer Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@alpayumo9060
Жыл бұрын
Thank you & God bless. Very clear and easy to understand.
@1AAuto
Жыл бұрын
+Al Payumo Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@jrfsailing07
5 ай бұрын
Thank you! Great video!
@kevinmeier9787
5 жыл бұрын
Great video that gets to the point, step by step instruction that anyone can understand Thank You !!
@1AAuto
5 жыл бұрын
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Kevin Meier
@carlosarriaga29
4 жыл бұрын
my confidence just shot up ....made it look easy!!
@1AAuto
4 жыл бұрын
+Carlos Arriaga Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
@jorgemora7190
2 жыл бұрын
Wow very job good thakns for your time happy Independence Day
@davidechols6797
3 жыл бұрын
You were very helpful thanks a lot got the brakes fixed thanks again
@842qwery
4 жыл бұрын
Straight and to the point. Thank you.
@1AAuto
4 жыл бұрын
+818116A Thanks for checking us out! 1AAuto.com
@lindsaywilliams9090
6 жыл бұрын
Great Video!!! Great Lighting, very clear instructions! Can you do one for the E brake :))))))
@Stonktradomus
5 жыл бұрын
You mean the rear brakes?
@wtfnetown5049
Жыл бұрын
Must be nice to be able to pay a top notch mechanic to install new brakes when the old ones are still like new. Lol. Great video.
@Macnificent78_
Жыл бұрын
What kind of black grease is that??? Great video ill be doing the brakes on my 03 soon
@mikea3552
5 жыл бұрын
Excellent video! Will be buying parts from you soon
@1AAuto
5 жыл бұрын
+Mike A Thanks for checking us out. We look forward to doing business with you! 1aauto.com
@robertmullins9231
2 жыл бұрын
Me again 1A is the best; Am an old vet 1A Auto older than me (4-9-50) BD coming up. NOT D day.
@briansviolins9376
Жыл бұрын
Great video I will be doing my brakes today. Wouldn’t it be better to start the car before pumping the brake pedal to build pressure, or else wouldn’t you just be building up vacuum pressure?
@luismjaramillo3756
6 жыл бұрын
just got yourself a new costumer thank you
@1AAuto
6 жыл бұрын
+luis m jaramillo Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@davidpowell3347
Жыл бұрын
Is there a rubber part that can be removed and replaced with a new one where the slide bolt goes in? And is this one where only Sil Glyde or similar lube can be used to grease the slide bolt,otherwise with regular green brake grease the rubber will swell and the sliders stick and cause hot brakes?
@robertmullins9231
2 жыл бұрын
no, I try that I live by the ocean, Washington State both Pad and plus front pin (RUST) Front pad just fill out, that rubber fitting. I had to rip it out. My jeep is a 2001 V8 Grand Cherokee Unlimited With a greases fitting (milage 162233) bottom line my new left rear brake from 1A will be here tomorrow 4-4-22. Like your video. Just remember Murphy law Bob
@angelamonroe7737
2 ай бұрын
Are you using ceramic or semi-metallic pads?
@hugozacatenco3905
Жыл бұрын
Gracias 🙏🏼 GOD Bless You!!! 😃🙌🏼👍🏼
@patmac
5 жыл бұрын
Anti seize on the studs?
@mikecoleman8036
5 жыл бұрын
Great video thanks!!
@gustavocantillo3241
2 жыл бұрын
Thanks
@aliandebaiona66
5 жыл бұрын
EXCELLENT JOB and Video ! Thanks for my GC WJ 99 , Best Regards from Jeeper over the Seas ;-)
@1AAuto
5 жыл бұрын
+AlfaSvD Thank you!
@SteveJohnson-ef7rj
6 жыл бұрын
E Brake please.
@Venenooffroad
5 жыл бұрын
A nice and clean job!! Thank hoy.
@1AAuto
5 жыл бұрын
+Veneno Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@danielmefford2635
5 жыл бұрын
Anyone know what size Allen socket to remove caliper?
@bradstucky4621
3 жыл бұрын
Popping off the 2 rubber caps reveals 2 pins which the caliper rides on. I believe the video mentions a T45 Torx bit, and that is what I used to remove mine, however, after struggling a bit to remove the Torx bit from the pin, I decided to check the size again and found out that mine are a 7mm Allen (hex) wrench size.
@Xplorer60
6 жыл бұрын
Have new wire clips that were supplied. I live in rust country and the old wire clip was rusted fast. I had to cut it off. New wire clip refuses to be installed.
@Floki_mk
4 жыл бұрын
Hey just came here to find the bleed valve on the rear breaks and I have to ask why didn't you bleed the breaks for the rear ? I imagine you would of bleed them in the front or are the break lines for the passenger and driver side each their own ?
@LH81633
3 жыл бұрын
Didn’t bleed them because he didn’t open the brake line! No need to bleed unless you open an actual line!
@DevinDeCremer
4 жыл бұрын
Would have been nice if you instructed the removal and reassembly of the drum brakes.
@chex313
4 жыл бұрын
Nice video...but my mechanic doesn't own anti seize either :)
@1AAuto
4 жыл бұрын
+chex313 Thanks for checking us out! 1AAuto.com
@steelerdynasty2007
6 жыл бұрын
exactly what i needed! any ideas how to remove the crud from the center caps (12:53)? i have that issue and it's a bit worse.
@1AAuto
6 жыл бұрын
+steelerdynasty2007 It looks as though it may be the clear coat on the wheels that is starting to let go. There isn't an easy way to fix it without either painting or refinishing the wheel. 1aauto.com
@kevinstott1317
5 ай бұрын
Parking brake doesnt get used on auto transmission cars? Transmission is not a kickstand! Use the parking brake!
@adamlayton7632
5 жыл бұрын
Thank you
@1AAuto
5 жыл бұрын
+Adam Layton Thank you!
@davez9050
6 жыл бұрын
What kind of grease do you use ?
@kcp7042
3 жыл бұрын
My emergency brake didn’t come back. Won’t engage. Have been cranking on it for 20 minutes. Any suggestions?
@1AAuto
3 жыл бұрын
+Kc P We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@kcp7042
3 жыл бұрын
@@1AAuto I’ll do that thanks. just watched your video on front brakes. Why are the back metric and the front sae?
@justinlalugski2083
6 жыл бұрын
Awesome thx
@hedleylint7622
5 жыл бұрын
What size torque wrench for the caliper screws?
@1AAuto
5 жыл бұрын
+Hedley Lint The caliper bolts use a T45 bit. The torque wrench is up to you as long as it fits the bit you have. 1aauto.com
@ashleybellerose7104
5 жыл бұрын
Is it necessary to use brake cleaner? I'm genuinely curious
@1AAuto
5 жыл бұрын
+Ashley Bellerose Thanks for watching! Brake rotors have a coating put on them from the factory that helps prevent them from rusting before they are sold to the customer. You will have to use brake cleaner to remove this coating, which is necessary to properly marry the brake pad material to the rotors! 1aauto.com
@ashleybellerose7104
5 жыл бұрын
@@1AAuto thank you!
@Wh0LisH
4 ай бұрын
no torque specs for bolts/pins?? smh
@salvadorplascencia5569
6 жыл бұрын
Thanks for that video I ask for doing that on 4 wheels and was 967dlls I will save about 500dlls
@1AAuto
6 жыл бұрын
+salvador plascencia Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@outmembered9219
5 жыл бұрын
Nice tutorial, guys. But you should NOT lube the caliper bolts inside the boots - read the manual. Rear bolts are non-lubricated.
@1AAuto
5 жыл бұрын
+Outmembered Thank you for the feedback! 1aauto.com
@angelawarren7455
5 жыл бұрын
It this the same tool for a 2000
@angelawarren7455
5 жыл бұрын
Someone. Please tell me what tool i need to. Get my brake pads change
@DevinDeCremer
5 жыл бұрын
So... apparently you guys don't bother replacing the drum brakes? Thanks for showing me the long way to do the normal pads. 👍
@johnsummers385
5 жыл бұрын
Devin DeCremer: Most people don't know that there are parking brake shoes inside the rotors. They were taking the time to impart some information to folks who refer to rotors as drums ..
Пікірлер: 87