How does the first gear feels torque-wise after switching to a new sprocket? IMO, even the stock gearing has a little too low torque for a steeper uphils - considering that the engine won't provide any sensible torque before 4-5k RPMs. But vibrations above 100 km/h are driving me crazy, and high-rpm torque diminishes after 8.5-9k RPMs, so I'm considering new sprocket too.
@qualifierone8899
11 күн бұрын
Thank you for your comment! This is my first enduro(offroad) bike and it is still fairly new(600km) so I really don’t know what it’s really capable of. I replaced the sprocket on the brand new bike because I took the word of many being disappointed how it rides on the road, I hate screaming engine. I’ve been off and on road testing it out and to me everything works. I might try out 46 in the future but I’m not going back to stock that’s for sure. Considering that replacing sprocket takes only 10-15 minutes max and price on JT sprocket on sale can be around 24€ I would just get different kind and switch them out accordingly depending on the conditions. If I go Tallinn-Riga-Tallinn (800km) I wouldn’t do it on stock
@rj6933
2 ай бұрын
Cool idea to figure the right torque….👍
@qualifierone8899
2 ай бұрын
Thanks 👍
@bainius
Ай бұрын
Hey, have you had a chance to test how your bike rides with the new sprocket? I bought a rally a couple of weeks ago and was thinking of doing the same thing. I feel that riding at or above 100kmph feels a little disappointing. Wondered if sprocket change would help :)
@qualifierone8899
Ай бұрын
I got to ride only 16km this past weekend when I got a flat tire on a new bike! (Decided to order new rear tire, it’s on order.)Speeds I reached were around 70km/h with 4-5k rpm. I’m in run in period so 100+ will be reached after first oil change. Check my latest video
@qualifierone8899
Ай бұрын
But based on my short ride I would say Yes I did a right thing swapping the sprocket I’m more into endurance than motocross feeling
@qualifierone8899
2 күн бұрын
Yes absolutely! Can’t imagine having stock rear sprocket now
@karlpalin1434
Ай бұрын
I replaced my rear sprocket and found the allen head nuts too soft for even 40nm. Did you have any issues, I think you went for 50nm?
@qualifierone8899
Ай бұрын
I did found them bit soft and one was about to slip. I guess it was because of low quality allen key bit I used.
@kirilkovchegarski3707
2 ай бұрын
Cool .. let me know the result once you test it.
@qualifierone8899
2 ай бұрын
It will take a little…probably end of march. We’ll see how kid spring is this year.
@bainius
Ай бұрын
@@qualifierone8899 Have you had a chance to test the new sprocket yet? 🙂
@MarcialWills
2 ай бұрын
How many teeth are there in the stock front sprocket?
@qualifierone8899
2 ай бұрын
14
@MarcialWills
2 ай бұрын
By any chance? Did you measure gasoline consumption with stock sprockets?
@onuraydeniz8043
Ай бұрын
Consumption little low but not that much. I tried at highway 85-90 km/h . Fuel consumption around 3.3- 3.5. It was 3.5 - 3.7 with original. I will back to stock because bike lost all funny torque feel😢
@qualifierone8899
Ай бұрын
@@MarcialWills no I didn’t. I haven’t ridden the bike at all. We had some snow today 😅
@qualifierone8899
Ай бұрын
@@onuraydeniz8043 we’ll see how it goes. I haven’t ridden the bike at all. Just decided to replace it based on the information I gathered. I need a enduro not motocross bike
Пікірлер: 19