Thanks a lot... now I can remove and clean the center wheel or swivel also very easily. All your videos are simple and very useful to do the regular cleaning of the deebot. 🙏👍
@ecovacstechnicalsupport5278
7 ай бұрын
Thanks 🙏
@tonykaykay
2 ай бұрын
Hi I hope you can help us. I have a cable stuck in the center main brush roller. How can i remove it?😢
@lIIIlllII
3 ай бұрын
Are the front wheels of the T10omni and the front wheels of the T9 the same?
@friscojoe2
Жыл бұрын
Do you have a part # for the front wheel assembly for the ecovacs x1 omine
@ecovacstechnicalsupport5278
Жыл бұрын
The front roller is same like ozmo 920, 950, T8, T8 AIVI, T9 all same.colour won't effect whether white or black because there's no sensors in front roller in these models
@ecovacstechnicalsupport5278
Жыл бұрын
Just can search as front roller or universal wheel for these models
@Benzeeli
10 ай бұрын
What are the common parts for Ozmo 600 front roller. I have difficulty finding the 600. @@ecovacstechnicalsupport5278
@Benzeeli
10 ай бұрын
can I use the 900 front roller? or can i remove just the roller of the wheel assembly of a different model to replace the 600.
@blaidemorris8737
Ай бұрын
Hello Where you buy this front roller? Thank you
@ecovacstechnicalsupport5278
Ай бұрын
For this you need to check online Sellers
@amandalennex9879
7 ай бұрын
So how do you put it back????
@ecovacstechnicalsupport5278
7 ай бұрын
Just press it will lock automatically
@jojoalasal3628
7 ай бұрын
I have an Eco Fax 10n robot, after 4 months of using it, it does not work with water, and then it started writing, the fall prevention sensor was covered in dust and did not work.
@ecovacstechnicalsupport5278
7 ай бұрын
Plz try to wipe the sensor at the bottom area...left, right & front part got sensor..if still same then can see wether any of the sensor might be rusty
@jojoalasal3628
7 ай бұрын
wiped them and the robot does not work and no water comes out to wipe
@ecovacsdeebot1838
Жыл бұрын
Hello Friend How to disassemble the main brush chamber of the Ecovacs T9 or T9 aivi? I want to look at the main brush motor. I am getting the error the main brush is tangled in Ecovacs T9 aivi. Can you make a video about the removal of the main brush chamber?
@ecovacstechnicalsupport5278
Жыл бұрын
Actually the basic is same in both models...I already uploaded a video in two parts how to disassemble & Assemble back...these videos... just follow those instructions under the motherboard got one screw remove rhat n just pull up the main brush motor assembly slowly...same way just put back
@WZAng-i1i
8 ай бұрын
Hi, my Ecovacs Deebot X1 Omni could be turn on but the wheels are not moving and the camera function doesn't seem to work. What could be the issues?
@ecovacstechnicalsupport5278
8 ай бұрын
Wheel need to replace... For camera deebot need to recalibrate then only camera function will start working...it happened when we reset the Omni X1
@WZAng-i1i
8 ай бұрын
I' ve actually had the 2 wheels replaced about a month ago and it was working fine. Last weekend, the wheel got dirty because my dog poop went into it and I tried to do a bit of cleaning up, using water to spray the wheels area. Then subsequently I could still turned on the Omni but the unit could not respond to command to go back to station or to clean the floor. Then I checked the camera and there was nothing showing. How do I recalibrate the camera function then? Thanks
@ecovacstechnicalsupport5278
8 ай бұрын
Calibration only can do in service centre because need need to reinstall the software & put in special ecovacs platform for this purpose... you can try to reset hopefully will be ok. Else i suspect water touch the motherboard that's why got problem
@ecovacstechnicalsupport5278
8 ай бұрын
If you are in Malaysia plz bring it to me I'll fix...can contact 00601137973018
@bs5676
Жыл бұрын
Price and where to buy plz share link
@ecovacstechnicalsupport5278
Жыл бұрын
Sir you need to check with ur local region service center or can check online like Amazon Ali Xpress etc
Пікірлер: 25