Buy Now!
New Serpentine Belt Tensioner Assembly from 1AAuto.com 1aau.to/ia/1AEBT00209
This video shows you how to install a new TRQ tensioner pulley in your 2013-2020 Nissan Pathfinder (3.5L V6). The tensioner is a springed device that keeps the serpentine belt in your vehicle at the correct tension to keep it on the pulleys, without being so tight that it breaks. Eventually the tensioner may become worn, loose, or stuck, resulting in belts that squeak, slip, or fall off.
This process should be similar on the following vehicles:
2013 Nissan Pathfinder
2014 Nissan Pathfinder
2015 Nissan Pathfinder
2016 Nissan Pathfinder
2017 Nissan Pathfinder
2018 Nissan Pathfinder
2019 Nissan Pathfinder
2020 Nissan Pathfinder
Tools you will need:
• 13mm Wrench 1aau.to/o5g/1AXAA00010
• 13mm Socket 1aau.to/obMH/1AXAA00015
• 21mm Socket 1aau.to/oatn/1AXAA00043
• Trim Tool Set 1aau.to/oak6/1AXXX00006
• 1/2 Inch Impact Gun 1aau.to/owp/1AXAA00252
• 3/8 Inch Drive Ratchet 1aau.to/obMH/1AXAA00015
• Torque Wrench 1aau.to/oaUN/1AXAA00044
• Gloves 1aau.to/oaAE/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oaiV/1AXAA00068
• Jack Stands 1aau.to/o7a/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Негізгі бет Автокөліктер мен көлік құралдары How to Replace Serpentine Belt Tensioner 2013-2020 Nissan Pathfinder (3.5L V6)
Пікірлер: 4