√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@saramenara9592
2 жыл бұрын
0
@drippingwax
5 жыл бұрын
Great video! Thank you very much! Mom's belt was chirping. I took it off and it looked brand new, but the tensioner "nut" was rounded, and completely rounded off when I was taking the belt. I used a Go 2 Socket and the "nut" sheared, so I replaced the tensioner, and when I was trying to install the belt with the new tensioner, I sheared that "nut" even worse! The tow truck just hauled the car to the shop.
@1AAuto
5 жыл бұрын
Thanks for checking us out. 1aauto.com +drippingwax
@GraV21
4 жыл бұрын
😂😂
@VictoriaRockwood
4 жыл бұрын
This happened to me too! I got a used tensioner from the pick n pull last time but my serpentine belt needs replacing now and had to buy a whole other new one! Let’s hope it doesn’t strip this time
@Mike-xc3ms
2 жыл бұрын
Thanks again for another great video!
@danlociceroify
5 жыл бұрын
Excellent tutorial! How difficult is it to replace the idler pulley, only? Ty
@kristopherwright9831
3 жыл бұрын
I'm having trouble slipping the top bolt off. Is it just a matter of finding the right angle?
@VictoriaRockwood
4 жыл бұрын
OMG that bolt at 7:00 is so hard to get out. I did it about 6 months ago. We had to finagle that sucker. About to have to do it again and came looking for a video to see if there’s an easier way. Let’s hope!!!
@1AAuto
4 жыл бұрын
+Victoria Rockwood Thanks for the feedback!
@Austin-pu6hl
2 жыл бұрын
Is this the same tensioner on a 6 cylinder highlander
@jayemveeaydee
2 жыл бұрын
What’s the torque on the tensioner lock bolt
@nicktorea4017
Жыл бұрын
the universal answer is tighten just till the threads start to strip then back it off a quarter turn.
@2Skills4u
4 жыл бұрын
My Celica's tensioner will not move...I've tried with all my strength, I've tried with my pal who was in the army and stronger, neither of us can move it..we've tried everything, I'm on the welded nut part but it won't budge, I've tried extending with a bar but it still won't how can I fix this as my belt is cracked and I also want to change my timing chain tensioner
@josephschneider5000
3 жыл бұрын
We're you cranking on the pulley itself or the bolt connected to the pulley?
@chrisrenfroe8183
3 жыл бұрын
So if I’m pulling to fast on the tensioner the belt won’t go on I’m stuck trying to get the belt on
@sew04ss
3 жыл бұрын
I'm having the same problem on a 2008 Scion xb
@71288
2 жыл бұрын
2009 scion tc I may have pulled too far on the tensioner and the bolt stripped and now the belt is also loose and won't retract to tighten up. Any solutions besides replacing the whole tensioner assembly?
@troyhigley1865
4 жыл бұрын
The person isn't showing a icon Tc not much room for bolt on tencerner
@drippingwax
5 жыл бұрын
Pry bar! I ended up putting a jack (and 2x6) under the oil pan to extract the tensioner! Is that honestly how we are supposed to do this?!
@CENTAUR559
4 жыл бұрын
with the mounts still on or did you remote their bolts too?
@Joe_1971
6 жыл бұрын
Was this procedure done because the tensioner was making noise? I have a 09 corolla xrs with the same 2.4l engine and it just started making a whining noise that gets louder and higher pitched with engine rpm. I did the old long screw driver to the ear thing and it sounds like my tensioner bearing might be going.
@1AAuto
6 жыл бұрын
+Joe C. This was replaced because the old one was not keeping tension, resulting in the belt skipping and making noise. 1aauto.com
@robertchisholm2483
9 ай бұрын
If you take a 1/4" off the top bottle, it slips right in, with out having to fight it.
@terrariumrich
6 жыл бұрын
My new belt is half way on and the tensioner won't loosen the belt. It must have gave out during the install. I want to replace the tensioner but don't want to cut the belt off the alternator. Any suggestions on how to get the belt off?
@brotherbrian1
5 жыл бұрын
Take the Alternator off and let it tilt over under the pressure of the belt. Should slip right off since it's the smallest pulley on the system. :)
@SP-ig3vs
5 ай бұрын
That did not look easy
@MrJrodDC
5 жыл бұрын
Bought a belt tensioner from them for my 03 Toyota Camry. Piece of shit! Broke as easily as my factory one when trying to put new belt on. 10/10 don’t recommend!!!
@1AAuto
5 жыл бұрын
We are sorry to hear about your experience with your purchase. Please contact us directly and we can assist you with a replacement or a refund. Service@1aauto.com Thank you +Volunteer Fisherman
Пікірлер: 30