Every other video had the camera positioned immediately on the starter. Thank you for taking the time to show the location of the starter from different vantage points. It helped a lot!
@aonforme3349
23 күн бұрын
Excellent!!! Replaced the starter on 2004 Rado (6/16/2024). No real issues but figured it was time. Easy process but a little tight getting in there.
@Marc-gx2mj
2 ай бұрын
Perfect job on this video! My truck has the same problem. You've made this job easy. Thanks a million!!
@archdukeofsynth
11 ай бұрын
I did this job 7 years ago myself, but this was a perfect refresher because I need to do it yet again...lol.
@strangeroamer3219
3 ай бұрын
How did your starter mess up so quick? I have a 2005 Chevy Silverado that I have had for 10 years and have never replaced a starter. I'm just here to search in case I ever have to do it. The only major thing I had to change on it was the water pump.
@archdukeofsynth
3 ай бұрын
@@strangeroamer3219 First time was because it was contaminated with oil from a rear main seal link and eventually stopped cranking. Replaced with the factory part. 2nd time was because the solenoid would no longer retract all the way.
@Thejajman
Ай бұрын
Thanks for the video my man, followed these steps and had an easy fix
@jimbim8604
2 жыл бұрын
Your video checks the two most important boxes: excellent lighting, and well placed steady camera. Good job.
@buyadriver
Жыл бұрын
I just bought a 2001 Siverado with a bad starter and dude I’ve gotta say… your video is so much better than others. Thank you.
@gabriel7664
8 ай бұрын
Thanks a bunch dude. I climbed out from under my dad's truck, read the manual then said, "There's gotta be an easier way. I'm checking youtube." Lol. I thought the dipstick tube was going to be in my way. Thanks for the good camera angles and pointing out the orientation for front or back. That was helpful. I've worked on stuff my whole life and I'm pretty handy at it but it's always nice to get instruction from someone who has already done that particular job.
@carlschmiedeke151
2 жыл бұрын
So much easier if you take the fender well off, you have easier access to the nuts, i just took my son's off today, more room to maneuver the starter, & put nuts back on, all truck wires are installed / or positioned in different angles, i found it easier this way
@jimandteresajohnson
Жыл бұрын
Super nice video. Good detail with understanding instructions and nut/bolt sizes stated. Best idea with AC DELCO part. Do it once and be done with it.
@BigMerkGee
Жыл бұрын
I'm going to roll with the 1aauto starter. I'll be watching this video as I install it Thursday.
@tharoldson
Жыл бұрын
Awesome explanation. Really appreciate the attention to detail, and explaining what direction you're looking, etc - that helps so much. Going to attempt changing mine now!
@Inexactbeetle
2 ай бұрын
You rock dude. Thank you so much 🤘 hope have a great day
@fordharley07
Жыл бұрын
Good video, made me realize I’m going to have to just take it to my mechanic lol.
@iceman87109
2 жыл бұрын
Bro! This video definitely helped me out... Way better than the other videos! You da man!
@larrywuzhere3866
2 жыл бұрын
Thanks for the great video. I changed my 3 weeks ago. I wished I had watched yours first.
@krismotley5216
5 ай бұрын
Fantastic video, showing great detail is always the best for these repair videos
@martinduquette4815
Жыл бұрын
You've been of great help today ! Thanks !
@cindycassibo8407
11 ай бұрын
I’m a women and even I understood what to do. Great job explaining everything 😊
@9t880
2 жыл бұрын
THANKS FOR BEING SO DETAILED
@rxNova
Жыл бұрын
Best vid out there for this job no competition
@erickarraker7697
Жыл бұрын
Thank you so much. This was extremely helpful!!
@DaveReynoldsGSDF
3 жыл бұрын
thanks for the great video. changing my starter tomorrow.
@juannava8377
Ай бұрын
Great video my guy👏🏼
@rmp608
2 жыл бұрын
Thank you!! AC Delco..!! smart man ..good choice
@dylansmith3
Жыл бұрын
Great video great visuals 👍🏻🔧
@TEX12REDD
2 жыл бұрын
Thank you very much sir very very helpful good work
@johnalbenesius2757
5 ай бұрын
Good job on your video, the only thing missing was putting the heat shield back on, but it should be easy enough to figure out!!!!!!!!!!!!
@nickmcghee5208
2 жыл бұрын
thx dog..u damn near did it for me
@jaysoncolbert6187
2 жыл бұрын
You got a great grip on those nuts, we are one in the same
@tonyhornejr3018
7 ай бұрын
Great video now im abt to try it.. wish me luck
@mikebarr1210
11 ай бұрын
Thank you brother!
@makalister668
2 жыл бұрын
Thanks sir...blessings .
@circuitmasters5258
2 жыл бұрын
Good job brother...
@nb6584
11 ай бұрын
Great video
@nha2448
2 жыл бұрын
Thank you so much.
@jaredklug3502
Жыл бұрын
Great job
@ManuelLopez-ls7mk
3 жыл бұрын
Muchas gracias
@yellowboy3rd635
2 жыл бұрын
That torque wrench though. I need dat bi.
@jameswhalen4903
2 жыл бұрын
Thanks man
@snakeryanmaster
Жыл бұрын
excellent!
@TheJaboa
2 жыл бұрын
Thank you
@adamcervantes2898
Жыл бұрын
Thanks
@bushmasta1415
3 жыл бұрын
You better not get that yoga mat dirty your wife will know you used it lol
@victoralvarez4826
Жыл бұрын
Have a question what type of sounds was ur starter making on the old one
@fixitquick69
Жыл бұрын
Kindof grinding/whining. I put it in the video, but hard to hear.
@primitivepioneer6373
2 жыл бұрын
What size pass through socket did you use?
@fixitquick69
2 жыл бұрын
On the 13, I used a 13. On the 14, I used a ......14.
@gbird192
Жыл бұрын
What size bolt is that for the cover shield?
@fixitquick69
Жыл бұрын
11mm
@lakeshow2475
8 ай бұрын
Are there ground wires attached to the starter wire is that a different set of wires?
@fixitquick69
8 ай бұрын
If I understand your question, I would say the wires going to your starter/solenoid are not ground wires.
@lakeshow2475
8 ай бұрын
@@fixitquick69 thank you
@charleswanamaker3680
3 жыл бұрын
Did u take off the shield or left it on
@fixitquick69
3 жыл бұрын
Took off the shield before I dropped the starter. Put the shield back on after I had the starter in place. You can do it through the wheel well, or from under the truck.
@ronnieblack7726
2 жыл бұрын
Is it the same for 4 wheel drive?
@therealskatedad
Жыл бұрын
“Thirtyyyyy seven pounds!”
@chalkyeye5956
Жыл бұрын
What do I do if the cable that connects to the starter is split in half?
@fixitquick69
Жыл бұрын
If you mean it frayed/has come apart, I would put a new terminal and some heat shrink on it.
@chalkyeye5956
Жыл бұрын
@@fixitquick69 I'm not sure how to explain it but the part that goes over/around the screw split in half
@fixitquick69
Жыл бұрын
@@chalkyeye5956 I would call that part a "ring terminal". Start googling.
@chalkyeye5956
Жыл бұрын
@@fixitquick69 thanks
@georgejung6393
Жыл бұрын
About how does this take on average.
@red7fifty
Жыл бұрын
Your shoes?
@jaysoncolbert6187
2 жыл бұрын
"a cheap man always buys twice" -Someone with money
@MegaHowtoMan
2 жыл бұрын
Was this a 4x2?
@fixitquick69
2 жыл бұрын
Yup.
@red7fifty
Жыл бұрын
@@fixitquick69 4WD has LESS room to work with.
@mhernandez041989
2 жыл бұрын
It’s a pain on 4wd 🤬
@alexaguilar5282
Жыл бұрын
Question would something happen if I don’t unplug the oil level sensor???
@fixitquick69
Жыл бұрын
It's just to get it out of your way. Not gonna mess anything up if you don't do it.
@jaysoncolbert6187
2 жыл бұрын
I don't wear comfortable shoes
@dustyschwartz1576
Жыл бұрын
The designer of this crap should be prosecuted
@bellyacres7846
10 ай бұрын
uh what about the dust shield? maybe found it later ? or noticed the housing was full of muck? I like that room there, Mines the 2001 5.3 engine ugh yup trying to put mine back in & wow. . .
@goneapetoo
Жыл бұрын
When you showed replacing the starter in the trans housing, the dust cover was not on the starter. It showed up later when you replaced the 11mm bolt. You should have filmed inserting the starter with the dust cover hanging from it...
@fixitquick69
Жыл бұрын
A wizard did it.
@VegetoStevieD
Жыл бұрын
Ya, it fuck'n sucked. Would have been a lot worse if not for your tips.
@philipboudreau9681
2 жыл бұрын
It's never a good idea to wear jewelry while mechanicking
Пікірлер: 87