3 10mm nuts hold this taillight assembly in place. You need a 10mm deep socket or a 10 mm wrench to remove the 3 nuts holding this in place. Pull the light assembly towards you and unclip the main wire harness. Twist the light plug socket to acess the bulb[s]. Remove and install bulbs as required. Install is just the reverse, straight forward stuff! Cheers! Or you can use Needle Nose pliers and twist the light socket[s] out to replace the bulbs. I needed to remove a Moth that was in my one light, so I choose to emove the whole assembly.
- 2 жыл бұрын
How to replace Tail Light Bulbs, Toyota Matrix.
- Рет қаралды 11,980
Пікірлер: 10