I HIGHLY APPRECIATE YOU THANKYOU SO MUCH FOR SHOWING ME , IT TOOK ME 10 MINS TOPS 💯💯💯💪🏽❄️❄️❄️❄️❄️❄️
@paulroberts2549
Жыл бұрын
Great job of explaining this job. Also helps to explain what the expansion valve does.
@timzauto
Жыл бұрын
To simplify it, the expansion valve allows the refrigerant to decompress quickly. This causes the refrigerant to be cooled down.If you've had a leak in the system it might cause small particles of debris to clog it since it is a sealed system.
@stephenmissi6815
Жыл бұрын
doesn't the refrigerant need to be taken out before taking off expansion valve?
@timzauto
Жыл бұрын
@@stephenmissi6815 it was,and yes it does.
@Krideezy
6 ай бұрын
Thanks for the video
@user-sq4ed7iv3q
20 минут бұрын
Are you using S.A. E tools on a metric car?
@josephbonilla5910
3 ай бұрын
Thanks buddy for sharing 👍
@timzauto
3 ай бұрын
You bet
@sapounngin2237
11 ай бұрын
Hi Daniel, I just bought Idoing head unit. My original radio is premium just like you. Can you tell me how I identify they send me the right one?
@juanguifam67
Жыл бұрын
Great job 👏 thanks you
@timzauto
Жыл бұрын
Your welcome,Thanks for watching.
@vald4164
11 ай бұрын
There seems to be some confusion, where should the O-Rings be replaced, the expansion valve kit comes only with 2 right? One big one small. Some poeple replace the O-Rings on the AC lines, and some people replace the ones that are on the evaparator's end. The best way would be to replace all 4?
@timzauto
11 ай бұрын
No confusion I change both,I just used the new ones for the outside lines this time I have a whole drawer full of new ac o rings,thanks for watching
@construindosorrisos3659
5 ай бұрын
Goodnight! Can you explain to me better what the signs of a problem with the expansion valve would be. Thanks!
@timzauto
5 ай бұрын
Usually the low side will be low and the high side normal and ac want be cooling,if you know your gauge readings I could tell you what the problem is probably at.
@BamaFanForLife63
Жыл бұрын
Do you have to recharge the system after doing this?
@timzauto
Жыл бұрын
Yes,vacuum system and recharge
@navajorezathlete1202
10 ай бұрын
What brand name electric ratchet is that you're using??
@timzauto
10 ай бұрын
Husky from Home Depot,I would highly recommend.
@PillCozbee
11 ай бұрын
Same for an Element? Doing one next week for a friend.
@timzauto
11 ай бұрын
Yes all Honda’s have basically the same set up those years.
@Von2795
Жыл бұрын
Well this work on a 2006 Honda accord ?
@timzauto
Жыл бұрын
Yes exactly the same
@Von2795
Жыл бұрын
@@timzauto so if I cut the firewall well the expansion valve stay in place when it’s time to go back in ?
@timzauto
Жыл бұрын
@@Von2795 it bolts up to the Evaporator core,yes
@luisduque4506
10 ай бұрын
What what’s the symptoms before the change ? Thanks
@timzauto
10 ай бұрын
Low side high,high side normal,restrictive flow from the valve,not opening enough,plus I’ve been doing ac work for 30 years,seen it all,lol
@luisduque4506
10 ай бұрын
@@timzauto thanks o lot sir
@yohanelsurdito1181
10 ай бұрын
If the a/c of my 06 crv will only cool when running in the highway . Would that be a symptom also?
@timzauto
10 ай бұрын
Could be many other components as well,have it checked.remember if you aren't checking you're guessing.
@seabass22
3 ай бұрын
@@yohanelsurdito1181most likely your condenser fan is not working
@josepha8759
10 ай бұрын
I'm not clear on what you had to do to remove it. One moment the part is in place. The next moment it is removed and it looks like a rat has chewed around the opening for it.
@timzauto
10 ай бұрын
Like I say in the video,u will have to use a dremal around the opening to be able to get it out,it doesn’t have to be perfect
@billyluck3705
2 ай бұрын
main reason i watched was to see exactly how you pulled it out,,,you skipped that part
@timzauto
2 ай бұрын
Just pulled it out once I widened the hole,pulled from the stud in the middle of the expansion valve to get it out,thanks for watching.
@ox9218
Ай бұрын
@@timzautohow did you “widened the hole”?
@xAnotherNigX
14 күн бұрын
@@ox9218he said he dremeled the hole
@chadteague86
Күн бұрын
@@ox9218 He said he used a dremel to open the hole up a bit.
Пікірлер: 42