Love the vids on the old school sport quads,keep it up guys!
@RHEC1776
4 жыл бұрын
Lmao he said if you don't have a buddy call your mom lmao. I'm guessing dad left for a pack of smokes 🚬 🤣🤣😅😅
@chief1223
6 ай бұрын
Lol I came here to call out that same line, it was so deadpan I was like, what? Love these guys, learned about the site last year and this is their first video I've noticed I've seen since then.
@jack200955
4 жыл бұрын
I replaced my clutch but there are no clutch cushion spring in there ... Seem too loose without the cushion springs .... Advised please.?
@vartankuchinskiy5650
4 жыл бұрын
Thanks for this useful video. Respect from Belarus 🇧🇾
@danyboy5134
Жыл бұрын
thank you for sharing I"ll replace my quad clutch by my self..
@GeppyGep
Жыл бұрын
How did it go? I’m having an issue with the clutch engaging now
@brando5200
5 жыл бұрын
And I have replaced my cable .tusk clutch kit . And I added one extra steel plate
@xdxdxdxdxdxdxboi398
Жыл бұрын
Thank you for this video helped me with my in depth good quality thanks 🙂🙂
@tuxiboy4844
5 жыл бұрын
Very helpful. Thanks
@jack200955
4 жыл бұрын
Love your videos I enjoy watching all of your videos 😍
@dbz42069
2 жыл бұрын
Thank you Needed this
@MrXdragonfuryx
3 жыл бұрын
Whats the brand or recommend clutch holder for this clutch model? The online store doesnt carry the same one in the video??? Please help.
@brandonlove9475
3 жыл бұрын
So I ordered everything you used in this video and assembled it as such. I have significant clutch slip from 3-6 gears but when it warms up completely it slips every gear. I did everything by the book and it's not an adjustment issue. Used wet clutch compatible oil also. I'm close to setting it on fire for my own satisfaction, any tips or something would be appreciated
@T_gaming28
6 ай бұрын
Did you fix it or burn it?
@eddyjavi02
5 жыл бұрын
hello, you could make a video by lowering the engine and changing the piston rings. please
@Mango-Man-vlogs8001
4 жыл бұрын
thanks
@dickmagee5391
4 жыл бұрын
In another video they put the friction plate with no notch (the thicker one ) in the basket last which would be against the inner pressure plate and you put yours in first which way is the correct way ??? HELPP
@rmatvmc
4 жыл бұрын
Our video is correct. I checked the service manual and it's not super clear in there, but the parts diagram shows the "thicker one" being put on the clutch hub/boss first just like we did. -Charles
@jdtv...9134
2 жыл бұрын
People need to know that the armature on the case needs to be lined up properly as well that you did not show
@reggiexp69
Жыл бұрын
i installed a ebc clutch kit and i put the disc that has no cut as first closed to the engine cause no instruction and manuel says stock clutch has the disc with the cut as last on the outside so yeah.... clutch works fine, but hard without instructions if they kit aint he same as stock :(
@GeppyGep
Жыл бұрын
I put in the 8/7 banshee driveline setup and now clutch will not engage. What I do wrong? 03 warrior
@brockmarabeas2810
5 жыл бұрын
Ltz400 next
@chasepacker2416
10 ай бұрын
What do u think chirping could be
@chromedome4243
3 жыл бұрын
What could I use to prop the 2 wheels up since I don't have the stands like you
@alexisvargas4243
4 ай бұрын
my clutch basket is stuck and wont come out. i already took the nut and little washer off
@themiddleman7322
Жыл бұрын
Does the spring plate bolts screw all the way in? Or do they have a bit of gap so the spring can have movement?
@themiddleman7322
Жыл бұрын
@SoundestB2D2 thanks bro
@123chestercheetah
4 жыл бұрын
i have an unbranded clutch kit. the fiber plates have no notches. there is the one fiber plate that is wider. and two of the rings are a little thicker than the other new ones...no instructions...what do i do?
@brando5200
5 жыл бұрын
I did my clutch but seems to be not grabbing .it moves but not even 25%
@thatawesomeman323
Жыл бұрын
Can you put oil back in or does it have to be wet clutch oil
@chief1223
6 ай бұрын
If you put standard oil in a crankcase that has a wet clutch, you won't have a working clutch anymore. You need oil designed for wet clutch applications as it allows the frictions plates to maintain enough friction to function correctly while still sufficiently lubricating the moving parts in the rest of the engine. It's not really any more expensive, I think even Super Tech makes some. If the issue is it being hard to find, that's a bummer but there is no substitute that I know of.
@pacospete4299
Жыл бұрын
i have a question concerning the lever on the cover . i just got this 2000 warrior that's not running and i thought it had a bad clutch cable. i disconnected the cable from the housing cover and the lever would move only a 1/2 to 3/4 " and stop solid , this is free play with no resistance. After removing the cover it appears the clutch basket was installed properly but the ( i'll call it a plunger ) that pushs against the push rod on to the pressure plate is barely touching the push rod.
@rmatvmc
Жыл бұрын
Is the clutch not disengaging? What is the symptom? With the cable off, that lever will have some play before it touches the push-rod. Does yours look different than the video with everything hooked up?
@thomasblevins6059
3 жыл бұрын
just bought a 2000 warrior. when you pull the clutch it doesnt go back. you have to push it back. is that a clutch cable issue or do i need to replace the clutch. or both?
@tiesonnainby9404
3 жыл бұрын
Definitely sounds like a cable issue
@882wir4
2 жыл бұрын
I need help!!!!!!... I did everything what the video showed but my clutch is not engaging what so ever....... Please help!!!!
@Erix7810
Жыл бұрын
Call a local shop.
@mountainliongaming9769
4 жыл бұрын
Same thing would apply to a 2006 Yamaha raptor 350?
@TheWallsocket
4 жыл бұрын
Yes
@ryderdell5117
5 жыл бұрын
Cool
@estebanamores9015
5 жыл бұрын
And in the 700r 2007
@coleswangin7715
5 жыл бұрын
Do a how to clean on a newer Yamaha blaster
@johnnyaltomare2422
5 жыл бұрын
Cole Swangin Water, soap, and some scrubbing is all it takes👍🏽
@mateusztraczyk5978
5 жыл бұрын
Jakie są wymiary cienkiej uszczelki
@keithert
5 жыл бұрын
What size is the bolt that holds the clutch basket in?
@moa_moto135
4 жыл бұрын
Keith Thompson 27mm
@ZekeGoodwin
Жыл бұрын
It has a base-plate of prefabulated aluminite 🤓
@michaelnorthrop3734
Жыл бұрын
You Literally don’t even mention what size socket to remove the clutch.
That keychain is gone scratch up the plastics while riding. Trust me😂
@rmatvmc
7 ай бұрын
Sounds like you have some experience 😎
@mattgarland1094
3 жыл бұрын
Mine broke and I need a new one
@craigjones7859
10 ай бұрын
What’s the size of the socket 😂
@mattgarland1094
3 жыл бұрын
What is the plastic gear in there called ?
@Jf-ii3yn
20 күн бұрын
For the oil pump?
@trentjohnson3614
5 жыл бұрын
If I dont have a clutch buddy why do I have to call my mom?
@Erix7810
Жыл бұрын
She will help
@alejandroabnalaguilar6525
2 жыл бұрын
Where can i get the clutch wrech
@rmatvmc
2 жыл бұрын
You can click the first link in the description to check out all the parts and tools used in this video. You can also click the link below to view the Tusk Clutch Holding Tool: www.rockymountainatvmc.com/parts/tusk-clutch-holding-tool-p
@brianlowe4321
4 жыл бұрын
Which clutch tool are you using in this video?
@salmonisyummiyeet163
3 жыл бұрын
Just buy an adjustable pin wrench, they’re only about $15 for a cheap one.
@trailerpark187
5 жыл бұрын
What kind of oil is that?
@rmatvmc
5 жыл бұрын
There is Yamalube 10w-40 in this quad. Here's a page showing everything you need for an oil change on a Warrior 350: www.rockymountainatvmc.com/Sales/2640/How-To-Change-The-Oil-On-A-Yamaha-Warrior Hope that helps!
Пікірлер: 69