2016 Ford Super Duty. Dealer wanted $250 for each (2) actuator. This guy saved me $460 plus an incredible amount of time. Excellent video!!! If you any more Super Duty tips please post. This guy is a genius. Thank you!!!
@ASPate
Жыл бұрын
2016 F250 - Replaced in a fraction of the time. I don’t know how you figured this out, but it’s a real time saver. The pick tool is the key to getting it out.
@insaneTrout
Жыл бұрын
This vid was far better than any other ones I've seen yet. I have to do all 4 on my 01, and this was far simpler than the others that want to take out the latch and handle and all that b.s.
@notacreditcardscam24
6 жыл бұрын
thanks for the great advice. it took about 20 minutes from start to finish
@robertramirez8779
Жыл бұрын
Thank you for the very very helpful video, Sir. You made our day. God Bless
@travisbennett6292
Жыл бұрын
This video was spot on! Took me 10 min to change out the driver door on my 2002 F350. Thanks!
@johnnydangerously7186
2 жыл бұрын
Thank you thank you thank you thank you. You saved me a lot of headache by watching your instructional video. I changed mine 2011 F250 actuator out no problem. Again thanks so much.
@jasonosbon5804
4 жыл бұрын
This is the absolute best you tube video I have ever seen....I have used it twice!!!
@kevinmcnally4236
11 ай бұрын
Best how-to on this subject. Thanks for sharing Jesus.
@grahamhodder6243
3 ай бұрын
I've been looking for this simple video for 6 months. I have the replacement actuator for my 2012 F-250 ready to install but didn't want to tear the whole door latch assembly apart. I'm going to tackle this today. Thank you, Jesus!
@grahamhodder6243
3 ай бұрын
I swapped out the passenger door lock actuator and it took about 20 minutes from start to finish. Woo Hoo!
@jasonschlupp2589
3 жыл бұрын
Just changed my 2 lock motors using this video worked flawlessly thanks for sharing your knowledge 👍
@sirvine8522
Жыл бұрын
The best tip ever!! Thank you!
@MrMoonSir
Жыл бұрын
Thank you. Just replaced my driver side in under an hour.
@foggyvegan
3 жыл бұрын
Wow! Appreciate smart techs on KZitem. I did one side the other way.. and this method on the other. Brilliant!! Fast and much simpler. Yeah it was tuff to work off for me, but this is THE WAY. Huge thanks!
@ttownjr
3 жыл бұрын
Thanks ...saved me a bunch of time and money
@StormsShitboxes
5 жыл бұрын
Just saved me a lot of time replacing all 4 in my crew cab - thanks for sharing!
@ronjcav
3 жыл бұрын
Thanks for your video!! Worked out great and probably would have taken the entire mechanism apart. Thanks! 👍
@dougpope3260
9 ай бұрын
You the man. Thanks for the video!!
@shane81615
Жыл бұрын
Thank you, enjoyed the video, very helpful!
@klasenns4814
4 жыл бұрын
Thank you so much for the video that makes life so much easier instead of taking the whole assembly out😎
@PINION1976
4 жыл бұрын
Worked like a charm! Thanks for uploading this!
@djosbun
4 жыл бұрын
This video is brilliant!! You're a genius! I am adding the OEM actuators to my F350 so this will save me a decent amount of time. Thanks for uploading!
@familyengineering5591
Жыл бұрын
Best video. I did not want to pull apart all the mechanisms
@itsrob2321
5 жыл бұрын
Many thanks for explaining this! Obviously this is the right way to do it.
@rafaelgomez4284
4 жыл бұрын
Ta cabron. Paisa ✌ solo no te chibies.y es todo .
@B-U-C-K-S-H-O-T
2 жыл бұрын
Nice. Thanks man for the video.
@thpmascook5944
3 жыл бұрын
Man Thank you so much.You saved me a lot of money.AAAA++++
Пікірлер: 36