Thank you so much. I purchased the part from your link it came in two days and I just fixed my pr-600 brother machine! I am not a very handy repair type so I am feeling proud and resourceful your video and part listing saved me a days drive and many dollars!! YOU ROCK!
@TheWreckingYard
11 жыл бұрын
Thanks for the video, not so much because I needed the encoder, but because I needed to take my wife's pr600 covers off without damaging them to see why it started banging away yesterday.
@brandonpeters24
6 жыл бұрын
Also, not trying to deter folks from replacement parts. Just suggesting it could be a simpler fix. This video is spot on for replacement concepts. A+ from beardface
@05kiwichic
8 жыл бұрын
So glad this video is still available. Very informative - thanks!
@flavioscorpions
13 жыл бұрын
thank you ,watching your video i can fix the error: ¨MAIN MOTOR ENCODER SIGNAL ERROR¨ : )
@afspangenberg
10 жыл бұрын
What should it cost to have this fixed? would this be something that the technician would have found if the machine had just come from its yearly service? I was in a middle of a project and the machine stopped working and the notice appeared.
@alicepence8859
Жыл бұрын
I did this from your video several years ago… now I’m getting the error again. Do these things go out a lot? Thx for your help and videos!!!
@sewingmachinedotcom
2 жыл бұрын
Clean the encoder strip first. You may not need to replace & can save that time & expense. We do not have a parts list for Babylock & would not know that part #. We are a Brother sales & service center.
@margaret-peggysedlak1927
Жыл бұрын
Help, my needle keeps hitting the bobbin case on baby lock alliance
@yellowsunshine65
7 жыл бұрын
I´m in need of that encoder now, but I couldn´t find it on the site link.
@MiguelSaeetRamirezSENSEI
9 жыл бұрын
Thank U so Much :) and you send parts to mexico? By DHL?
@karenordaz8022
5 ай бұрын
Thank you for the video it was very helpful. One question though. I always do the maintenance myself and when a greased the inside were the metal tubing is close to this encoder sensor I added grease and my finger touch the plastic round ting that’s touching this sensor it got greased and it made my sensor turn on. Can I take it apart clean the round plastic in hopes the sensor error disappear or do you thing it need replacing?
@SteveTramell
5 ай бұрын
I would attempt to clean it but I suspect that you may have gotten grease on the sensor and will have to replace it. Good luck and be sure and use lint free cloths for cleaning.
@RaeesKhan-wq3tw
6 жыл бұрын
please tell me swm electroince fold signal problame not show 24 head signal so any person tell me what can i do
@campbellkr
13 жыл бұрын
what is your source for parts?
@robynm8952
2 жыл бұрын
I have the Babylock Valiant 10 needle. I just received this error message in the middle of a project. Do you have encoders for the Valiant?
@ccac88
6 жыл бұрын
Hi do you have this part for PR620. Index Motor Product ID: XF7433001 I encounted my machine showing error sign "Needle case motor has been locked". Can help diagnoses it's help to replace this index motor will be work properly. Thank you for your kind cooperation.
@brandonpeters24
6 жыл бұрын
Have not replaced my encoder yet, but, ran into multiple issues which led me here. First, open shields, as shown, and clean clear round disk and area surrounding to verify it's not a false positive failure. Has kept me running for MONTHS since my first issue. Also, it's technically a light sensor, which I found out today, so, if you run on a skeleton (sans plastic BS, so you can easily maintain machine yourself), make sure this is not affecting the machine- kept getting encoder signal errors due to sunrise this AM) Before replacing, please double check the simple stuffs. :) beardface
@roannesk8
6 жыл бұрын
Brandon Peters hey there...just received this error...do you have a pic or description of the ‘DISC’ to clean around? Thanks in advance
@brandonpeters24
6 жыл бұрын
Hey hey. Go ahead and email me directly. Can't seem to figure out how to post photos on here. beardedrougarou@gmail.com
@christophergottzmann1791
4 жыл бұрын
I have a main motor encoder signal error. Is this encoder the part that I'd need to fix?
@sewingmachinedotcom
4 жыл бұрын
It could be that but it could also be the belt that goes from the motor to the upper shaft.
@wendylowe7840
3 жыл бұрын
@@sewingmachinedotcom how can you tell if its a belt issue or the encoder?
@sewingmachinedotcom
6 жыл бұрын
I do not have that in stock but Brother does. I just checked their inventory. If you call in this order and prepay we can order this for you with our next Brother order - we order at least twice a week. Thank you Dana 404-261-4240
Пікірлер: 24