BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
@haggermeister
3 жыл бұрын
OPERATION COMPLETED ✅ Thanks to this video I have just replaced the discs and pads on my own clio 4 dci. Cheers 👍🏻
@vitalykurta8696
8 ай бұрын
A lot of work has been done. Why didn't you check the caliper guides and replace the lubricant? The brake cylinder piston was not lubricated.
@campbellmorrison8540
7 ай бұрын
I think you forgot to mention that you should take some brake fluid out of the reservoir before pushing the brake cylinders back. If you dont you will likely end up with brake fluid everywhere and remember it eats paint. Still very good videos thank you
@ljubavnifeder
2 жыл бұрын
I have to say this is the Shit and a Warning about the front pads. on CLIO 4 there are 2 versions of calipers. So when you order brakepads be very careful when you order the brakepads. Check your calipers first. This can be a huge cost and time consuming. Soo there are 2 videos one with only brake pads and the other one is this. Those videos are the best how to change but it is also the most misinformative. Check your calipers and rotors because CLIO 4 have 2 sets of brake systems in the front.
@MaliceEmbrace
Жыл бұрын
Yeah, depends on manufacturing year. Cars made on 4/2015 to 2019 have bigger calipers and pads.
@timtim8468
3 ай бұрын
I strongly recommend to not jack these unibody cars like shown here, as long you don't want to permanently modify pinchweld and subframe. These cars, like the Nissan K14, must be jacked at the marked points with decent rubber pads. No stands needed, there is no need to crawl under the car for a brake job. A ok hydraulic lift like in the video will hold it safely.
@rudibudi3223
Жыл бұрын
Thanks a lot
@CRV3N
2 жыл бұрын
i just replaced my pads and when the car coasts it makes a weird sound. I am not sure what is causing it
@y1ink
2 жыл бұрын
Did you add the copper grease ? Could be the pads settling in
@user-ei3dq2dw6i
2 жыл бұрын
Not bleed the brakes ?
@2DC24
2 жыл бұрын
No, you didn't disconnected the brake hose. So no air should have gotten inside this no need to bleed the brakes
@bluefish121
2 жыл бұрын
Great video. Thanks. Awful website experience. Discs say set of 2 but prices do not make sense. Items added to basket. Basket empty when basket selected. I'll be using other suppliers unfortunately
@campbellmorrison8540
7 ай бұрын
Agree its a terrible website I suspect its for a phone, might be better using the app.
@mannymufakazi7774
3 жыл бұрын
Hi where did u get the wheel covers shown at the start of the video?
@_shogun_gaming_
3 жыл бұрын
its not covers, its original alu wheels... :) i have the same one for mine ;)
@2DC24
2 жыл бұрын
Copergrease might interact with ABS sensors. Ceramic Grease doesn't and thus is advised by modern Cars..
@raps7287
Жыл бұрын
Would silicone grease also work?
@timtim8468
3 ай бұрын
This is a tale, it makes no sense. And the sensor is not under the disk where they put it anyway.
Пікірлер: 21