Find the parts used in the video on CarParts.com just there carparts.solutions/RAM1500
⚙️ NEEDED CAR PARTS AND PRODUCTS
- Brake pads : www.carparts.com/brake-pad-se...
- Brake cleaner : carparts.solutions/BrakeCleaner
- Copper grease
💪 TIGHTENING TORQUES
Slide pins :
- 2009 through 2014 models : 24 Ft-lbs
- 2015 and later models : 31 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your RAM 1500 :
- carparts.solutions/ToolBox
List of the tools we used to replace the front brake pads on a RAM 1500 :
- Hydraulic jack : carparts.solutions/FloorJack
- Jack stands : carparts.solutions/JackStands
- Wheel lug wrench
- Big flat head screwdriver
- Ratchet
- 13mm socket
- 17mm wrench
- Clamp or iron wire
- Wire brush
- Paper towel
- Torque wrench :
20 to 250 Ft-lbs carparts.solutions/TorqueWren...
100 to 600 Ft-lbs carparts.solutions/TorqueWren...
- Brake Wind-Back Tool : carparts.solutions/BrakePisto...
Don't forget to subscribe : / @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 RAM 1500
- 2010 RAM 1500
- 2011 RAM 1500
- 2012 RAM 1500
- 2013 RAM 1500
- 2014 RAM 1500
- 2015 RAM 1500
- 2016 RAM 1500
- 2017 RAM 1500
- 2018 RAM 1500
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Dodge RAM 1500 safely : • How to jack your 2009-...
⚠️ CARPARTS.COM'S INFOS
- Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.
- Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.
- Drive smoothly and avoid sudden braking for the first 30 miles or so, to avoid glazing the new pads.
What do we mean by "glazing new brake pads"? Brake pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:11 How to pull up your RAM 1500
1:13 Remove the brake caliper
2:04 Remove the pads
2:14 Prepare and insert the new pads
3:35 Press the piston
4:15 Put the caliper back + Tightening
4:49 Safety tips
5:00 Put your RAM 1500 back on the ground
5:10 Tips
Негізгі бет How to replace the Front Brake Pads 2009-2018 Dodge RAM 1500 🚗
No video
Пікірлер: 10