Thank you for sharing your knowledge. I was able to change out my fuel filter on my 2015 CVO Street Glide without any issues. I truly appreciate it.
@DrHarley
3 ай бұрын
I am happy that you received some value out of my videos
@thefrogzilla420
10 ай бұрын
Great info to share with us. It's always good to change a gas filter at least one time a year. Put painters tape around the hole so less chance of scratches for those who do it themselves. Thanks for sharing with us ✌️
@deanbalouris330
7 ай бұрын
You reinstalled the old fuel filter O ring inadvertently. The new one was in the box.
@DrHarley
7 ай бұрын
I noticed that as well. I did change it off camera. Mistakes happens when filming and keeping on track of what I am doing.
@05RangerXLT
10 ай бұрын
great video, definitely adding this to my list of winter projects
@Jake_RollinThrottle
10 ай бұрын
Harley says that's a 100k mile service for that little filter?! YEA RIGHT!! Fuel filters are cheap and a good tutorial like this definitely should be changed sooner.
@DrHarley
10 ай бұрын
That's why I include that in a 20K service
@ddk_tn
10 ай бұрын
awesome DR, great information
@RidingandWrenching
10 ай бұрын
I need to change the fuel filter on my 18 RG. Thanks for sharing
@DrHarley
10 ай бұрын
Thank you for watching.
@freedom6919741
3 ай бұрын
That blue cloth towel wiping on the tank makes me cringe. Thanks for the tips.
@GlidingOnTwos
10 ай бұрын
Dam Doc, you taking all my ideas. Are you in my head or something, 😂. Was just doing this video for my 2013 SG.
@DrHarley
10 ай бұрын
Lol. Do it anyways Nori.
@xanbiker
10 ай бұрын
Yep that was a quick video but good knowledge Similar tank filter set up on My V Star.
@DrHarley
10 ай бұрын
Cool, thanks
@crazylouie68
4 ай бұрын
They make a cam wrench for that piece your hammering, but they’re hard to find. Nothing on amaxon or ebay
@DrHarley
4 ай бұрын
Yes they almost impossible to find. That's why I use a drift and a hammer.
@gremlyn1439
10 ай бұрын
Caught it after the fact, but great info. Thanx
@DrHarley
10 ай бұрын
Thanks. I thought that it could help quite a few people.
@mickeyrodi4786
2 ай бұрын
Can I put the assembly back in WITHOUT the filter, and just add a generic one in the fuel line under the apron? Seems like a better way
@DrHarley
2 ай бұрын
Seems like an option. However the fuel pressure coming put the the tank is high pressure.
@ftgokie
5 ай бұрын
Lets take the old o-ring off and we will leave the new o-ring in the box so we dont get it confused with the old o-ring. Then installs the old o-ring! This is a what not to do video! 🤔
@DrHarley
5 ай бұрын
I figured it out before I installed the fuel tank. I did remove the old one and replaced it.
@user-fo9ru5vt2s
5 ай бұрын
Nice video, only thing i have a problem with is u put the old o ring back on
@DrHarley
5 ай бұрын
I did notice that. However I did swap it out off camera.
@user-fo9ru5vt2s
5 ай бұрын
Awesome, Great videos & good info.
@pabiker65ultra56
10 ай бұрын
Very cool
@jimbo4260
4 ай бұрын
Good video. Music was distracting. Id rather listen to you than music.
@DrHarley
4 ай бұрын
I agree. I have removed all music from my videos since.
@ElBuffalo
10 ай бұрын
Great, how to thanks.
@DrHarley
10 ай бұрын
My pleasure
@-hay-soos
Ай бұрын
My 2015 street glide special is having hard time to start, like the throttle body stays open or something. Pops , smells like gas then it starts. Cleaned it, changed air filter and put some seafoam in the tank. Seem to help but the problem came bad. Can it the fuel filter or a sensor.? Any help much appreciated it.
@DrHarley
Ай бұрын
If you haven't changed the fuel It would be a good idea to do so. However, it's almost impossible to troubleshoot and diagnose
@-hay-soos
Ай бұрын
@@DrHarley thanks
@jobeta22
7 ай бұрын
If you are going to hit it with a blunt instrument, use bronze tools. Otherwise, great video.
@DrHarley
7 ай бұрын
Bronze is too soft. It will chip apart. I tried that in the past.
@dreamlrg3993
Ай бұрын
My bike won't start after the
@DrHarley
Ай бұрын
Make sure that the u clip is installed properly and if so. Check every connection in the tank. When you turn the ignition to the on position, you should hear the fuel pump prime.
@franzend1
Ай бұрын
You used the old O-Ring….
@DrHarley
Ай бұрын
I realized that after. I did replace it with the new one
@henryjoneit2918
10 ай бұрын
I swear you used the old O ring Doc. Isn't the new one still in the box ??
@DrHarley
10 ай бұрын
Nope. Believe me, I did not. I swapped it out off the camera.
Пікірлер: 45