Thank you - never could have finished it without your video
@douglasflores1462
2 жыл бұрын
Hi, do you have a guide to replace just the screen, while using the same frame? Thanks in advance.
@FellowSunBro
3 жыл бұрын
Do not use a metal pry tool to lift the motherboard.
@JaiHo777V
Жыл бұрын
Helpful.. thanks 👍
@photondebuger45
2 жыл бұрын
Oh yeah i hope you do remember or if you're able to answer because i know this video was posted a year ago but is the g7 supra the same as the power?
@douglasflores1462
2 жыл бұрын
Yes, it is. Cricket calls it Supra. I have put cricket motherboard in tmobile screen. Any parts are interchangeable between them.
@jennt9012
2 жыл бұрын
Can you use a screen and motherboard from another phone that’s the exact same?
@g-ro4449
4 жыл бұрын
Really helpful bro, thanks.
@tbpc800
4 жыл бұрын
I would love to know where you purchased your materials. Especially the double sided tape and the magnetized screw drivers you used. The iSesame tool seemed very useful as well. Please post where these items can be purchased.Thank you
@iSmart1
2 жыл бұрын
on eBay.com
@edwinbab705
2 жыл бұрын
Is it easy just change the glass layer?
@iSmart1
2 жыл бұрын
no, it's not easy.
@edwinbab705
2 жыл бұрын
@@iSmart1 I guess I buy the whole layer
@iSmart1
2 жыл бұрын
yes, you'll need the full assembly, lcd+digitizer+frame if possible
@coltonlynn9366
3 жыл бұрын
I was wondering why the power button is not working after digitizer installation any suggestions thx
@coltonlynn9366
3 жыл бұрын
Also the fingerprint ribbon broke but power button was still working just fine on the old digitizer. Would the power button work if I bought a new finger print ribbon cable?
@douglasflores1462
2 жыл бұрын
Maybe you forgot to connect back the battery connector to motherboard. Phone can work perfectly without fingerprint reader.
@anothereditingchannel2164
3 жыл бұрын
He didn't take off the plastic at the end. That bothers me
@edwinbab3205
2 жыл бұрын
CN I use hair dryer to heat up I want remo e glass only and then sgL u wa till cools down. Then remove the vkass
@mariapalacios7516
4 жыл бұрын
Awesome 👍
@wellybanks4813
4 жыл бұрын
Hi what size double side tape did u use please?????
@alidaestrada3123
4 жыл бұрын
Where do you get at
@17valleyforge76
3 жыл бұрын
So I replaced the. Glass and now the talk into speaker doesn't work any idea why?
@iSmart1
3 жыл бұрын
Sometimes there's a plastic piece covering the place where top microphone is placed, make sure the tiny hole in the microphone and the one to the outside is clearly open.
@17valleyforge76
3 жыл бұрын
@@iSmart1 what about the one on the bottom on the charge port board
@pattskatoey3139
Жыл бұрын
You don’t need to take the motherboard out to replace the screen.
@edwinbab705
2 жыл бұрын
I use uv loca glue it does not hold what glue I use
@photondebuger45
2 жыл бұрын
Awww you actually redo the steps if you forget to a step prior like when you forgot the sim tray
@misakiluv
4 жыл бұрын
Wish me luck, gonna try to fix my brother phone.
@crystalcontreras7541
4 күн бұрын
Wish i could do i need to repair my phone
@KlusterFux
3 жыл бұрын
You're replacing the whole phone, not just the LCD screen.
@jennt9012
2 жыл бұрын
Can you use a screen and motherboard from another phone that’s the exact same?
Пікірлер: 37