Thanks for the video it was very helpful as I just replaced mine last weekend. The one other thing I would add is that this is a good time to get your spark plugs replaced since you will be taking the intake off
@BLK_GOD
Жыл бұрын
If that's the only reason I'll wait till they gap out and make the car misfire lol. I just got the code for evap so just going in for the purge
@LA_Commander
7 ай бұрын
You don't need to remove the intake manifold to change the spark plugs bro. What are you talking about?
@420Toth
2 ай бұрын
@@LA_Commander they said nothing about the manifold, just the intake, as in the main tube, which can easily be in the way for a spark plug change
@LA_Commander
2 ай бұрын
@@420Toth Ok, thanks. Maybe I misheard what he said.
@sorendumar1958
Ай бұрын
@@LA_Commander Misread*
@tyquanwashington.8510
Жыл бұрын
The gremlin finally reared its head. Bought the car in 2016 and just yesterday it started. Thanks for the video my man.
@donky23
2 жыл бұрын
Just replaced mine this week. Seems to be running much better. Going to drive it for a couple days before putting the scan tool back on it to make sure the codes are not still pending.
@orangejjay
Жыл бұрын
Love the red door inserts, man. Good stuff!!
@gogurt_st
2 жыл бұрын
I think I’m gonna need to do this soon so thank you for having this video out :)
@danbeer4452
22 күн бұрын
Would this make the throttle body go crazy with a weird clicking noise? I did take the manifold off when doing the harness install...
@chrise213
Жыл бұрын
Thank you!!! everyone else just showed how to replace it.
@ryanhughes8569
Жыл бұрын
What were the symptoms you were experiencing? My car feels down on power and sluggish and I have P0456 code, figuring it’s the purge valve that needs to be replaced
@juniorcortez2620
7 ай бұрын
How’s it holding up bro? I’m planning on replacing it
@JS-qf2ny
Жыл бұрын
I’ve had my car for 10 years 70k miles. I just now got this warning. I did not want to pay $300 at the dealership to get this fixed. But looking at this car makes me want to reconsider buying a new car and just dressing mine up.
@totov7673
Жыл бұрын
Bro Did your cheack engine light go on? Im woundering if I have a bad purge valve will my cheack engine light go on??
@JS-qf2ny
Жыл бұрын
@@totov7673 the engine light did go off. It the recall was in 2018. You should change it anyways because once I changed mine the fuel economy was so much better.
@JS-qf2ny
Жыл бұрын
@@totov7673 also if you change it. Cut the tubes. You’re never using the part again. And this will help you twist the and take the locks off easier with the stem infront of the engine. Don’t knock it with a hammer! That piece is plastic!
@totov7673
Жыл бұрын
@@JS-qf2ny So you had a cheack enginge light and you changed it?? or you never had a cheack enginge light but you still changed it?
@totov7673
Жыл бұрын
@@JS-qf2ny Intreasting🤔I never thought of this?
@patrickmcnicholas3109
Жыл бұрын
Great vid! It looks like your fog lights are on when you turn the car on, is there a mod you did to allow that? I always have to push the button when I get in. Also sounds great on the turbo-- other than the intake are you running the DV+ or any blowoffs or anything?
@Nickjoenap
Жыл бұрын
Yeah DV+. Not sure about the fog lights I’ve never done anything to them
@totov7673
Жыл бұрын
@@Nickjoenap Will I get a cheack engine light if my purge valve is not working? I never replaced it but I did do the recall??
@StoneAgedGaming
9 ай бұрын
This is super late but adding for future readers. Technically speaking the re-call isn't a permanent fix. They do replace it and they adjust the ECU or whatever so that a CEL should pop on much earlier to let you know it is failing. However, it may NOT pop on if you notice symptoms early such as rough idle after filling up etc @@totov7673
@LeeGwaltney-xc7hn
Жыл бұрын
Part I’m seeing on Rock Auto for 2018 Focus ST (913430) consists of 5 small parts and looks nothing like your part. Can you provide the link to the part you purchased?
@tennisace522
8 ай бұрын
You probably figured this out by now, but that is a kit to avoid having to take apart line. It should consist of 4 connecting joints and the actual valve, and you just take it apart at the junctions and replace those on the factory lines.
@ericrodriguez3973
2 жыл бұрын
No lie I just got a engine code for this, what’re the chances you came out with a video on how to replace it 🫢
@walterlucken2252
Жыл бұрын
Thanks for the video. I just changed mine. Those little white clips are a pain.
@majik895
Жыл бұрын
Is the solenoid the round thing in the middle of the purge valve tubing? Is it possible just to replace the solenoid if the tubing is still good?
@aCONSCiOUSxMiND
Жыл бұрын
From what I’ve seen, you cannot
@sticky_fingerz2443
Жыл бұрын
Look up the dorman kit
@majik895
Жыл бұрын
@@sticky_fingerz2443 Thanks! I bought the part and it fixed my idle problem. Great vid!
@Craig_450
8 ай бұрын
Where did you get the red vinyl clips on the front radiator cover? I wanna get white lol
@donaldenamorado8496
Жыл бұрын
What is the part number for this I need to order one
@kawshikmurali308
11 ай бұрын
Whats the part number on rockauto?
@JuddManDu
2 жыл бұрын
Great video! Just installed The AddW1 Catch Can thanks to your tutorial. While I had the manifold off I noticed there is a coolant line that comes from the coolant tank and runs somewhere towards the trans, well someone disconnected something and zip tied it to that line but I’m not sure where the sensor clip goes to you think you could help?
@Nickjoenap
2 жыл бұрын
i’m not sure what that would be. might have to find a diagram and trace it back. but if there’s not an issue might not have to worry about it
@JuddManDu
2 жыл бұрын
@@Nickjoenap only problem is the traction light is on and I can’t put it into sport mode or normal with the button I was wondering if that is why lol
@Nickjoenap
2 жыл бұрын
@@JuddManDu yeah that could be a chance that’s why i’ve never heard of if thag
@JuddManDu
2 жыл бұрын
@@Nickjoenap I’m just not sure where it goes lol if I find out I’ll let you know
@JuddManDu
2 жыл бұрын
Figured it out from the forums it’s a symposer connector which my car does not have anymore lol
@ILLSMOKQ-xs6qs
4 ай бұрын
I have check engine light on for P144C code it says evap or that’s running rich but not sure ? If this is the issue
@codyyeager2740
6 ай бұрын
Hey i have a couple questions if ypu reset the ecu on your accesport do you have to reinstall your tune and also my accesport kept throwing the code for bank 1 sensor my upstream o2 sensor i fixed and i think it was the problem but im still getting negative correvtions in cylinder 4 like negative 1.3 is that okay my afr on wot is 11.5 and my oct adjust ratio is -1 im just curious on what resetting the ecu does.
@Sur_justin
2 жыл бұрын
Did it fix anything with your idle or codes by replacing your injectors and purge valve ? I’m having some fueling problems as well with codes that are saying the fuel rod pressure and running lean
@Nickjoenap
2 жыл бұрын
the injectors fixed it a little bit and then also had it returned and now it’s good to go
@Sur_justin
2 жыл бұрын
@@Nickjoenap had what returned ? My bad
@Nickjoenap
2 жыл бұрын
@@Sur_justin sorry i meant to say retuned. i got a revision on my tune and had it adjusted a little
@Sur_justin
2 жыл бұрын
@@Nickjoenap alright cool, might be doing the same thing then. Thanks for the vids they’re a big help !!
@colinmercer5215
Жыл бұрын
I’m picking up my st next weekend but I have to drive 5 hours to get back home should I do this before or can I wait till after I get back?
@Nickjoenap
Жыл бұрын
You can wait
@CrazedHistorian
24 күн бұрын
what is that black canister thing with red hardware? on right side up front
@RuelReyes
6 күн бұрын
that's an oil catch can
@frankiemartinez9806
Жыл бұрын
So every-time i fill up the st it struggles to turn on for a few sec but cranks right up so is this usually the cause for what’s happening by chance?
@Nickjoenap
Жыл бұрын
Yes that is most likely purge valve
@soupsfarm1825
Ай бұрын
Holy shit I thought I was going fucking crazy when I would fill up gas and only when I fill up my idle was a little weird and would clear up like the next day. Apparently it’s due to this purge valve
@christopherhitchens1502
Жыл бұрын
What year is this its different than mine
@Jaye323
6 ай бұрын
Why haven’t you put the part number…check every comment and just wasted my time
@maxbenz3824
8 ай бұрын
How long did it take for your fuel gauge to read right after the repair
@cheesynibblets4960
4 ай бұрын
May or may not, plastic deforms
@maxbenz3824
4 ай бұрын
@@cheesynibblets4960 thanks for getting back to me, so far about a year later it seems to be accurate again
@noahsmall2570
Жыл бұрын
I have so many questions. What side skirts, and did you do those door panel inserts
@Nickjoenap
Жыл бұрын
I have videos on both on my channel
@sheluvme7273
Жыл бұрын
do you know know how to replace a wastegate solenoid?
@txcavi
Жыл бұрын
Tool 1 hour to do this, thank you for the video.
@MelloKingMal05
2 жыл бұрын
I just got the code for this today after having a strange idle for a few days
@keegenmalchow8490
2 жыл бұрын
What did it feel like?
@orangejjay
Жыл бұрын
Does that gold tape actually do anything heat-wise or does it just look cool?
@Nickjoenap
Жыл бұрын
It supposed to reflect heat from making the intake pipe hot and increasing intake temperatures but I’ve never tested it. Intake was used and beat up so I used the tape to cover it
@tyquanwashington.8510
Жыл бұрын
Probably negligible. It's designed to deflect heat and keep intake temps down.
@lilmeatevan
2 жыл бұрын
I have a code p0456 will this fix it ?
@autumnthomas6210
2 жыл бұрын
Yes more than likely
@lilmeatevan
2 жыл бұрын
@@autumnthomas6210 fixed it instantly , be careful in the back there I lifted the brake reservoir on accident and it pissed brake fluid 😂
@xoceroXD
Жыл бұрын
Thanks for the help my man!
@austinharrell2821
2 жыл бұрын
Link for part??
@ericarrizon9032
2 жыл бұрын
Bruh I just replaced the purge valve a week ago video would have been great back then lol
@Soccerwiz1
Жыл бұрын
Whay rear diffuser do you have?
@Nickjoenap
Жыл бұрын
I made it
@chuchin0429
2 жыл бұрын
What year is this car?
@Nickjoenap
2 жыл бұрын
2013
@williamcopenhaver5516
Жыл бұрын
Seems like bullshit that they won’t fix it again. How bad is it if I just don’t fix this? Got replaced on a recall 10,000 miles ago and already going bad again.
@jessebudelman
Жыл бұрын
I’m still going on 2 years with a shitty purge valve, fun times. Lol
@totov7673
Жыл бұрын
Im woundering If I have this?? Did your cheack enginge light go on?
@jessebudelman
Жыл бұрын
It’s always on, but I think it’s one of the fault codes. You’ll know if you fill your tank and your car doesn’t want to start up. Lol I gotta feather the gas and keep the rpm needle above 1500 rpm for a couple of seconds.
@totov7673
Жыл бұрын
@@jessebudelman Thanks for answering bro. Oh shit realy that bad? nevermind I dont have this. I have another question is the OEM focus ST clutch soposto feel light and soft when pressing down all the way?
@jesuscarrillo4344
Ай бұрын
Not trying to be rude but why have you not changed it? I just changed it for a second time in 3 years of ownership this morning. Took 15 min and $60 for the part.
@uzunmiggit4218
2 жыл бұрын
We’re can I buy this from I have same model but can’t find the right purge valve?
@Nickjoenap
2 жыл бұрын
Try rockauto
@suladensxiong2718
2 жыл бұрын
I couldn't find one for my RS and went to AutoZone. They have better resources in finding parts. They had it ordered and arrived the next day to be picked up.
@landind.4773
Жыл бұрын
could you add the link please. lol
@nathanyee6870
2 жыл бұрын
My car has been kinda idling weird a little
@Kasperzach
3 ай бұрын
"fwd smh" lmao
@viprk24OC
2 жыл бұрын
😮💨 I can actually hear the Dirty Valves...
@Jaye323
6 ай бұрын
Why haven’t you put the part number…check every comment and just wasted my time
@Bane_Diesel
Жыл бұрын
Do you know if the process is similar on the focus rs.
@Nickjoenap
Жыл бұрын
I would assume so. The pcv valve assembly itself is a little different on the RS but same general idea. Many people retrofit the RS purge valve in the ST to stop them from breaking
Пікірлер: 100