Super helpful- thank you! Most tubers talk so fast and assume people new to the hobby know everything- your tutorial was simple and to the point !! No know it all attitude!!! Thanks again !!
@danielpetersson9566
4 жыл бұрын
This was just what I needed to know. Simple and very neatly explained. Thanks!
@fierceflyer5
8 жыл бұрын
Thanks, clearly explained with great video.👍🏻
@JakeBilling
8 жыл бұрын
Not a problem
@bennettdylan5491
3 жыл бұрын
i guess it is kind of randomly asking but does anyone know a good place to stream newly released series online ?
@khaleelalessa_rc8424
6 жыл бұрын
Thank you so much jake i wasn’t know how to change the spur gear but now I think i am perfect ❤️
@JakeBilling
6 жыл бұрын
No worries my friend 🙂👍🏻
@mikeandjillbracken813
7 жыл бұрын
Thank you for telling me how to change the spur gear
@mrdabbermurker1281
2 жыл бұрын
Nice video I was having trouble with my slash 4x4 I'll Gass it and wheels wouldn't turn so I watch this video I noticed the slipper was loose I seen how you tighten that little nut with the Spring it did the job she's running again I appreciate you for this video 🤘
@draqqx
7 жыл бұрын
I actually figured it out for myself but this is a great vid and its very clear and easy to use
@heerjor
6 ай бұрын
Hell yeah, great video!!! Replaced it in no time
@Andries.Buskenz
Жыл бұрын
Straight blessing. The new hoss steal ones work
@panda_rc
3 жыл бұрын
Great video! Thanks! This helped me fix my Rustler 4x4 VXL.
@Mr1979capri
8 жыл бұрын
I am so stunned on those EPIC JUMPS bro!!!!!! kept them SLASHES FLYING MATE!!!!! : )
@kjmiller5023
3 жыл бұрын
Lol it’s funny how easy your stuff slides in. I’m over here beating it just to get the driveshaft to connect 😂
@LacyLand330
7 жыл бұрын
Thank you thank you thank you I could not have done it without this vid!!! 🙏🙏🙏
@copperglitter3777
6 жыл бұрын
this helped me a lot. if there was a love it button I would press it. I just needed to replace the spur gear.
@networkn
2 жыл бұрын
This is a totally brilliant video. Perfectly clear, excellent well-spoken instructions and the video showing each part was excellent too.
@TSemasFl
8 жыл бұрын
Good stuff, short, sweet and to the point.
@andrewklosterman1361
3 жыл бұрын
Thank you this video helped alot
@ethanstonw4372
3 жыл бұрын
Helped me it helped me and I watched it and I just got there going through everything and got to work thank you
@eskimojoe6564
4 жыл бұрын
Awesome video man :) I love how the slash 4x4 was designed.Everything is really easy to get to. :)
@chapc
3 жыл бұрын
Thank you, excellently explained. I do appreciate it much.
@user-zj2lq6bv4q
10 ай бұрын
Thank you so much you saved me👍
@jhaeck1
Жыл бұрын
great video thanks...gotta replace that gear real soon and this helps
@bradstraight9093
Жыл бұрын
So helpful. Thank you!
@JakeBilling
Жыл бұрын
Cheers mate!
@andyrichey1192
6 жыл бұрын
Thank you I just learned a lot. I'll be watching for more
@SoupLevo
4 жыл бұрын
Great video. Clearly explained. Thanks!
@EFG-AMBAMAN
4 жыл бұрын
great video !!!! amazing Quality
@er77can
8 жыл бұрын
Keep up the good work jake
@robertcompton2254
3 жыл бұрын
Thanks dude!
@joeh472
7 жыл бұрын
I usually watch you beat the snot out of your trucks, but this time you helped me out on a fix !!!!! I built my Slash 4x4 from a roller, but when I bought it, I had the guy install a Robinson Racing Slipper so I have never had to mess with one before. Now I know how to and there's actually nothing to it. Thanks for the help Jake......Now, go tear that thing up !!!!!
@SteveSoper1979
7 жыл бұрын
Awesome. So informative. Your channel is really good and entertaining. Thanks for the tips.
@JakeBilling
7 жыл бұрын
Thank you Steve!
@rcoverdose
8 жыл бұрын
Very informative.Thanks for sharing Jake.XD
@robertfowler3234
6 жыл бұрын
Great video!!! Just what I needed. Thanks
@PavelVarga24
6 жыл бұрын
Thanks for the video, very helpful
@679iceman
8 жыл бұрын
This is why I sold my tmaxx...the slash is mush easier to work on
@rcblitzfpv8346
4 жыл бұрын
Sam Brentwood I have the tmaxx and slash and love the tmaxx more just the sound the smell and the realism
@brockpitcher8911
8 жыл бұрын
Thanks heaps runs like silk!
@familywright5656
6 жыл бұрын
Great video and explanation! Thank you!
@Krideezy
4 жыл бұрын
thank you so much for this video :)
@ianmoore8625
4 жыл бұрын
thanks that was really helpful
@nagisayoshikawa
7 жыл бұрын
very helpful, thanks so much.
@rchobby4420
7 жыл бұрын
Thanks this helped me a ton👍🏼
@TheTobyT
8 жыл бұрын
Very helpfull, thanks very much!
@zulurcracingteamzulurcrt1517
4 жыл бұрын
Thanks. 👍🏿
@Brodykrenz24
6 жыл бұрын
This is awesome thank you mate
@jerroldtaylor3047
5 жыл бұрын
great video it should be the same steps to do my Rustler 4x4 VXL
@garthboyer
7 жыл бұрын
great video looks like a breeze now
@angelgarnica8730
7 жыл бұрын
Thanks
@FullRCZone
8 жыл бұрын
Tuto thumbs up thx @@@👍🏼
@MCLERC88
6 жыл бұрын
i love this car own blue one , and I install a dusty motors cover ,
@queithai9035
3 жыл бұрын
Nice video but how did you get out everything so easy?? For me these things were so hard to get out
@darylsullivan3447
8 жыл бұрын
Great tutorial!
@JakeBilling
8 жыл бұрын
Thanks Daryl
@wantedbucket08
5 ай бұрын
i bought a traxxas rustler 4x4 ultimate in march within the first week of owning the car the shock shaft snapped, weeks go by and the spur gear gets shredded twice, i spent $585 on this car and its nothing but replacing stuff. i dont beat this thing its riden on pavement and grass my slash 2wd can get beat tf up and still work its like i have to baby this thing
@OhLordyG
5 ай бұрын
I have a 4x4 vxl slash does this video work with that model as well?
@Carsandcoffe
2 жыл бұрын
Hey just as a question does the same procedure work with the Traxxas rustler 4x4
@rc_tyler
5 жыл бұрын
If I remember correctly you don't have to take apart the slipper clutch to remove the spur gear. All you need to do is, remove those three screws and slide it off and replace it.
@elvyneng6422
4 жыл бұрын
Thank you Jake for a very detailed explanation on this. Would you believe it, just straight out of the box my Rustler 4x4 Vxl stripped the gears clean after a 10min run. Pretty bummed over it. Just curious, did you also experience this with your Rustler?
@EconomyElk
4 жыл бұрын
Sweet this was lots of help. Also do you know if they make a stronger spur gear? My castle motor is to powerful and keeps destroying it after a couple of days.
@jeffavril8897
5 жыл бұрын
A little bit of blue loc tight on pinion screw will save a lot of headaches
@jefferyfromsouthernmaine2482
3 жыл бұрын
I torque mine down with the air gun.. about 180 - 190lbs should do it
@Blacked_OutMedia
3 жыл бұрын
I got sand in my spur gear and it got in between that and the pinion. Destroyed the gear and melted the plastic spur gear. Debating if I should just buy a whole new slipper clutch assembly, or if I should buy a new plastic gear or upgrade to steel. I’m just cautious about steel because if the pinion and steel spur gear grind it’s gonna be more expensive but it’s gonna last longer. Please lmk what I should do cuz I’m truly torn...
@haynlaskan9668
3 жыл бұрын
On mine, traxxas slash vxl3s i have a plastic retainer only where that bigger on the one shown here is, idk what to do haha stick a bearing there or send it, my prollem was full throttle and a screech but no forward seemed slippish so, no teeth missing just shot small pilot bearing idk 😅
@Tigerball23
4 жыл бұрын
so to add a metal pin gear and metal spur gear do i need to add metal differential gears also.
@er77can
8 жыл бұрын
Are u going to do any server based videos
@NortheasternRider
8 жыл бұрын
I'm having a problem putting the whole thing back together the gear starts grinding
@SomeonewithaCar
3 жыл бұрын
Is it the same spur gear that’s in a 1/16 slash?
@ForgotAboutDre420
5 жыл бұрын
What if the truck dosent have the three friction plates
@rterc1171
7 жыл бұрын
1:40 I believe I can fly!!
@jobenz-ix3qj
Жыл бұрын
do i need to grease it, mine keeps wearing how do i fix this?
@facehunter504
6 жыл бұрын
Do you have a video on how to change all the gears for the Slash 4x4? Idk what I’m doing and i took this thing apart to clean. Idk what goes wear now lol plz help
@KillaKlownFPV831
7 жыл бұрын
part number for that bearing behind the spring?
@Carsandcoffe
2 жыл бұрын
The only problem is that the rustler is a super tightly packed slash on massive wheels and clip less body mount
@lexxx8709
3 жыл бұрын
I keep replacing it and after 2 runs the pinion gear strips the spur gear idk what I’m doing wrong it keeps happening !! Please help
@MrDasichi
8 жыл бұрын
great video but its like really really stuck and I cant get it to move it all
@VictorNichols-j9q
26 күн бұрын
Guys I need your input the bearing that goes in front of the spur gear never came on my car I don’t think cause when I took the car apart I put all of my screws and shit in a bin, and now I don’t have the bearing and I’m freaking out
@superjoint57
6 жыл бұрын
I took mine apart today. Seems as if I have a bushing & not a bearing. Not the one that goes inside the spur gear, but the other larger one. Is this “normal”? Thank you! 🤘🏻
@benellis128
5 жыл бұрын
D.P.T. I know that I am super late to reply but it is normal if you have the brushed version
@corgigaming5396
Жыл бұрын
I did this but my spit gear isn't touching the pinion gear can anyone help me
@MrDasichi
8 жыл бұрын
I cant get the first thingy off when trying to get the actual spur gear off
@Jonah_cantbike
Жыл бұрын
How do I put on part 3956x
@ryanhammond3388
5 жыл бұрын
I did all that and replaced it but the gear wore down again after 15 minutes of driving. I don’t know what the problem is.
@JakeBilling
5 жыл бұрын
Meshing is incorrect! :)
@Issac_G
6 жыл бұрын
is there any need to add grease to spur gear and pinion gear ? thanks
@fxxc777
6 жыл бұрын
Isac Gutierez Of course there is, idiot.
@Moneys169
5 жыл бұрын
What size is that shaft ? Like it’s diameter ??
@OneTimeIAteABagel
5 жыл бұрын
Usually all of the 1:10 driveshafts from traxxas are the same size and diameter.
@trenthedges2722
7 жыл бұрын
Should my shaft be slide back and forth
@JakeBilling
7 жыл бұрын
Dudes on Bikes That's what she said?
@hengliang6770
6 жыл бұрын
不需要螺丝胶?
@DannyChikoo
8 жыл бұрын
Hey how you doing. I just did this exact and my driveshaft has play back and forth is that normal? It seems loose
@Owiko7
8 жыл бұрын
nope, that is completely normal. My stampede 4x4 is like that too.
@DannyChikoo
8 жыл бұрын
Owiko7 alright thanks bud
@Owiko7
8 жыл бұрын
Daniel Perez happy to help.
@santiagomguerrero89
5 жыл бұрын
Did u just put another plastic one back again 🤦🏻♂️ what r the upgrades for dommee
@JakeBilling
5 жыл бұрын
Blah Blah.
@carsonsrc5333
5 жыл бұрын
why is yours so strong mine breaks on every 2nd drive
@JakeBilling
5 жыл бұрын
Maybe the meshing is incorrect? :)
@carsonsrc5333
5 жыл бұрын
most likely
@samanthabrown5234
5 жыл бұрын
does it work with a fiesta
@JakeBilling
5 жыл бұрын
I think it's the exact same process :)
@NortheasternRider
8 жыл бұрын
Some one help me
@ramseydbk1494
7 ай бұрын
my dumbass car is like sticking together and none of the pieces come apart
@Taka5u
6 жыл бұрын
U don’t need that shaft
@jackjones4152
7 жыл бұрын
That's terrible...why would anyone use plastic gears in. 60mph car
@EricGrind
7 жыл бұрын
JackSweetBeaTS need to have a weak point somewhere. If everything was aluminum you would break the more expensive things. I use a plastic 78 tooth in my 76mph Bandit and after six months of full speed runs, the pinion and spur teeth look new with no wear. :)
@jackjones4152
7 жыл бұрын
Eric Grind hey man, that's great to hear. Thanks for your feedback!
@multipreach2674
5 жыл бұрын
Because like with many other components it's not needed, why would it be? Steel pinions on steel spurs also make a hell of a noise. Most cheap nasty alloys are a waste of time, steel is too heavy....
Пікірлер: 112