NOTE: I would highly recommend that no novice or amateur DIYers try to fix their own water pump. This video is more to show you what mechanics have to do, or a video tutorial or other mechanics and/or someone that has some experience fixing cars. If you have any questions, drop them in the comments below and I'll get back to you.
Tools Used:
-1/2in pipe.
-Large flat tip screwdriver.
-Ball peen hammer.
-3lb sledge hammer.
-Brass punch.
-12mm ratchet wrench.
-Two different sizes of 3/8in ratchet.
-3/8in extension.
-14mm socket.
-Two different lengths of 12mm socket.
-10mm socket.
-1/4in ratchet.
-Two different lengths on 1/4in extensions.
-Two different lengths of 10mm socket.
-Small flat tip screwdriver.
-Gear wrench tool.
-Anti seize.
-Dielectric grease.
-Ultra black silicone (gasket maker).
Parts Used:
-Water pump (brand used: Toyota part# 16100-28041).
-Serpentine belt (brand used: Bando part# 7PK1905).
-Extended life PINK antifreeze/coolant.
As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!
Негізгі бет How to Replace the Water Pump on a 2008 Toyota Camry
Пікірлер: 28