This video demonstrates how to remove and replace your throttle body on a 2005-2009 Ford Mustang V6. Tools needed are: 8mm wrench & ratchet with extension and 8mm socket.
Here is a link to purchase a new throttle body: amzn.to/3qVvYAu
If your vehicle has the codes P0122, P2106 or P2135, replacing the throttle body should fix these codes.
We had the battery unhooked for 2 hours, which should be enough time for the computer to clear itself. Here is how to recalibrate your throttle body: put the car in ignition (run) mode and wait for your dash warning lights to turn off, slowly press down on the gas pedal until reaching the floor (approximately 10 seconds), release gas pedal slowly, turn the car off, then start the car and let it warm up for 15 minutes. Make sure your air is not blowing and your doors are closed. After 15 minutes, turn the car off for 5-10 seconds, then start up the car and drive. This method worked for our vehicle.
Hope this video helps! Please leave a "like" and subscribe to our channel for more videos!
DISCLAIMER: WE MAKE NO WARRANTIES, RESPONSIBILITY OR LIABILITY, EXPRESS, IMPLIED OR OTHERWISE, REGARDING THE ACCURACY, COMPLETENESS OR PERFORMANCE OF THIS VIDEO. ALL VIEWS EXPRESSED IN THIS VIDEO ARE OUR OWN AND DOES NOT GUARANTEE RESULTS. ANY ACTION YOU MAKE FROM THE INFORMATION IN THIS VIDEO IS STRICTLY AT YOUR OWN RISK.
#fordmustang #s197 #throttlebody
Негізгі бет Автокөліктер мен көлік құралдары How To Replace Throttle Body On A 2005-2009 Ford Mustang V6
Пікірлер: 19