Versión en español: kzitem.info/news/bejne/sWiwmYFvr3WBdZw
@beelzedog
Жыл бұрын
thanks dude. this is much better than the videos that show up before this one that 33 minutes long. Simple and to the point. Thank you.
@SantiagoSantiago
Жыл бұрын
Glad it helped!
@BoatsNhoes824
2 жыл бұрын
My thumb stick popped out after throwing it xD so this helped a lot!
@cjay8976
Жыл бұрын
Same bro😭
@prqxii2213
Жыл бұрын
@@cjay8976 same 😭😭
@luckyzonkey8027
Жыл бұрын
sameee. on 2 controllers 💀
@MxtzzFN
10 ай бұрын
Same but I have the normal joysticks so it’s hard to just put it in so then I need to unscrew everything and the tools that the company use are really weird so don’t have them lmao
@RyanPerson-qi1mg
5 ай бұрын
Same
@davidborden4904
3 жыл бұрын
I absolutely hate removing the plastic covers because it always feels like I'll break them. To avoid that I've been using the KontrolFreek Omni thumbsticks for quite some time and I'm pleased with them. They feel better and are more durable than the original sticks.
@Killakeks
11 ай бұрын
I used the end of a sturdy teaspoon to put pressure on some points under the plastic cover. made it much easier and lowered the (low) risk breaking the cover by levering too much on one site. 👩🏫🎉
@Stogiewise
2 ай бұрын
Nice ad
@kylemiller7076
Ай бұрын
I just replaced my thumbsticks last night. They were horribly worn out. I followed this video and used the proper pry tools. I was honestly amazed at how strong the shell was! So many times I felt I was breaking the tabs, yet they held up just fine. I was able to tear it down and put it back together with ease. I'm sure they will be brittle in the future, but luckily these controllers are fairly new.
@RossFixxxed
2 жыл бұрын
Simple and to the point. Very helpful. Decided to order some new thumbsticks and I'll try this once they arrive. Thanks!
@SantiagoSantiago
2 жыл бұрын
Enjoy! :)
@Osquashum
2 жыл бұрын
Hey, how'd it go? Did you have any difficulties or learn any helpful tips?
@RossFixxxed
2 жыл бұрын
@@Osquashum it worked out great, thanks a million! I was a bit nervous once all the casing was off. I think having some isopropyl would have been good to clean everything out a bit but I'll do that soon once I get some. The process itself was absolutely as described in the video.
@glee_ock
9 ай бұрын
@@RossFixxxedwhat was the measurement of the screwdriver or what did you use to take the controller apart?
@RossFixxxed
9 ай бұрын
@@glee_ock the set I got comes with a T9 mini screwdriver so I just used that. Very easy.
@cryptidsprinkles
11 ай бұрын
Thank you so much! I figured out how to pop off the parts to disassemble. I used one of my torque screwdrivers and carefully applied pressure by wedging. Your tutorial is so concise, focuses of details without being too unabridged and easy to follow!
@SantiagoSantiago
11 ай бұрын
Nice work!
@jogo8261
10 ай бұрын
Thanks for this guide, replacing the thumb stick on these controllers is so much easier than PS4 controllers. Took me forever to figure out how to get the little trigger springs back in on the PS4 controllers, glad you don’t have to mess with any of that on the Xbox ones. Thanks for the guide
@loweffortproductions1985
10 ай бұрын
The sticks just pop out of place once the plates are off? That's super easy! I modded my N64 controllers a while back by replacing the original sticks with Gamecube-style ones, and I had to undo extra screws and stuff. Thanks for simple and quick tutorial! Got my special warranty-voiding screwdrivers in the mail 😂
@Paradoxical124
Жыл бұрын
I cannot comprehend how stupid it is when companies don’t use phillips head screws, just so you can buy a new controller because you don’t have the specific screwdriver.
@nmore69
6 ай бұрын
Or you can buy a $2.00 screwdriver
@cassemturner9484
5 ай бұрын
Its called a torx screw driver T8 to be exact not hard to find at all ace, menards, home depot or almost any hardware store will have em. Amazon even sells them lol
@cassemturner9484
5 ай бұрын
A small enough flat head would work too just dont strip the screw
@justinli826
3 ай бұрын
I find it stupid that companies choose to use Philips screws at all. Especially when the screws are small, Philips head screws are super easy to 1. strip by accident, and 2. confuse with JIS screws. Frankly, literally any other screw head is better than Philips and runs less risk of you turning it from a screw into a nail.
@lynic-0091
3 ай бұрын
Dafuq? Why would you buy a new controller which is like 50 EUR, while a screwdriver is only a few EUR? 🤣
@NanatsukiArumu
14 күн бұрын
This clip help me a lot! Thank you so much!
@SantiagoSantiago
14 күн бұрын
You're very welcome!
@Envoiden
Жыл бұрын
Thankyou, but I suggest even getting a thin butter knife, or something similar, if the controller backpads seem to be a bit difficult to remove. I found that prying lightly as you go along and hold is useful; i snapped a single tooth on the right one, left was much cleaner.
@kcopson8870
Ай бұрын
Thanks mate keep going in life
@rypzeditz
Жыл бұрын
Thank u so much! Now my controller feels as good as new!🔥🔥
@FlM1hai
6 ай бұрын
Great vid, thank you! Changed my thumb sticks in 5 minutes.
@erenkusdemir1432
8 ай бұрын
Thx a lot for this useful and quick video. My controller feels new as the first day.
@Txchno37
Жыл бұрын
Thanks I just raged so hard and it popped out so I watched this to help
@w33dwalker
7 ай бұрын
thanks bro, helped me a lot, greetings from Germany
@djpainkiller3326
Ай бұрын
thanks now I can replace my thumbsticks after watching your tutorial on how to do it. my right one has that weird rare uncommon loose spinning issue on the circular grip part and it's just Thumbstick
@djpainkiller3326
Ай бұрын
Update the parts arrived, and I have fixed the controller. My controller has now been fixed and refurbished.
@thetriwizardchampion9809
Жыл бұрын
I’m scared the plastic handles would break if I pull them off 😭
@arunm981
8 ай бұрын
Respect Bro!!! I was about to order a new one and just tried your video. works fine. Thanks
@NicholasBaronMorgan
2 жыл бұрын
Thanks dude, to the point I like it no 10 min waffle before hand
@capuducul
3 жыл бұрын
Great video and really useful. Thank a lot.
@dontsubbbbb
Жыл бұрын
I have an extra tip use a flathead screwdriver first until the middle thing in the screw goes down and then you use a different screwdriver which I forgot the name of
@maysonanthony_
Жыл бұрын
Very useful, quick and easy to understand. Nice video! Thanks 👍
@Try2kdogg
3 ай бұрын
Thanks for telling me i need a screw driver a after I pop the cover of
@gray.8370
2 жыл бұрын
I’m here because I threw my controller at my couch and my thumbStick popped out now I need to pop it back in lol
@NoahDame-t9p
Жыл бұрын
Absolute Lifesaver.
@nonungus
3 жыл бұрын
My third-party PS4 controller has the exact same thumbsticks you changed for the old ones. They are fine but still kinda slippery.
@Atari26Hundred
4 ай бұрын
Thanks for the help!
@SantiagoSantiago
4 ай бұрын
Happy to help!
@mindrover777
3 жыл бұрын
Excellent tutorial Santio 👍
@MEB-1997
3 ай бұрын
Man, opening those up looks terrifying. I’d be so worried to break something or having something detaching while the cover is off. It’s gotta be done though because the rubber is shredded on one of my thumb sticks. Wish me luck.
@SantiagoSantiago
3 ай бұрын
You got this!
@dimasadityo_
10 ай бұрын
Thank you very much man!
@visionz4844
11 ай бұрын
so i cant do this unless i have that specific screwdriver
@Suneku009
3 жыл бұрын
Great video Santiago,Question how long are you using those analogs stick?? Maybe like 3 or 4 years??
@SantiagoSantiago
3 жыл бұрын
This was a used controller I got with a used xbox one s, the owner was a 14 year-old that played a ton of hours for 4-5 years
@UNKNOWN.CPt..
7 ай бұрын
I just used the opening of a nail clipper to open it much easier
@StefanT2796
7 ай бұрын
You don't need to remove the backplate. It is so so hard to put it back in properly. Just remove the fa eplate!
@Adrion-ctx
Жыл бұрын
Thanks u helped me fix my controller
@Thunder0wnsz
5 ай бұрын
TYTY straight to the point no fucking around. Only thing I would note is to be very careful when prying/removing the 2 side panels as mine were on VERY tight and I had to be careful removing them. I was actually so impatient that I did break 1 of the clips, but easily avoidable if you are careful and pry your way along slowly/carefully. Also one of the screws got stuck on one of the magnets as i was trying to do it up and it was the final screw I had to put in... So be mindful of those magnets cause I thought I lost 3 of them at one point, but actually they were stuck on the magnet behind I think the trigger? XBOX ONE btw.
@sollomoi
3 жыл бұрын
Thx, that rly help me too repaired msi controller
@llinknadescricao
2 жыл бұрын
Good vid man! Are those new thumbsticks original?
@SantiagoSantiago
2 жыл бұрын
They are third party, but you can buy whichever thumbsticks you want as long as they fit :)
@brownbear5293
7 ай бұрын
@@SantiagoSantiago noob question: My controller version is 1537. Are the thumbsticks different between versions, or between One, Slim, etc? Thank you!
@Dr_infinity
5 ай бұрын
I love you thank you so much
@wesaac6729
3 жыл бұрын
Buen tutorial, me hubiese servido si tuviera una Xbox series x, s 🙃
@SantiagoSantiago
3 жыл бұрын
O una one, o una pc con control de xbox 😂🥲
@PunxFlameslinger
8 ай бұрын
One of controllers thumbsticks are kinda loss will adding new thumb sticks make it feel brand new?
@calzone986
6 ай бұрын
Thx
@TrasherBiner
3 жыл бұрын
"If you found this useful , like , subscribe, get a facial tattoo with my name and name your first born Santiago (I don't care if it's a girl)."
@199ali
10 ай бұрын
Now I’m asking myself why I bought new controller when I could’ve just replaced the joystick 🕹️ 😆
@caspar5050
Жыл бұрын
very helpful
@florentinohernandez0
10 ай бұрын
I followed your instructions and once I put everything back together it will not power on was there some thing I might’ve overlooked when putting it back together
@yaanipie3311
2 жыл бұрын
Thanks man
@Chea112
11 ай бұрын
thank u sir !
@SantiagoSantiago
11 ай бұрын
Most welcome!
@Just_Another_Random_Dude
2 ай бұрын
Does changing the stick stop the stick drifting, or is it just for replacing broken sticks?
@SantiagoSantiago
2 ай бұрын
This won't stop drift, that part is soldered to the board, this is for when the sticks get worn out on the outside
@Just_Another_Random_Dude
2 ай бұрын
@@SantiagoSantiago Thank you for taking the time to respond! I was afraid of that haha.
@bookah8787
Жыл бұрын
Has mine all of 10 days and they are destroyed lol cheers for the video
@dasinmason5489
2 жыл бұрын
Bro I have an entire screw driver set not a single one fits where tf do I get one to fix this shit apart
@big_boi5330
2 жыл бұрын
I have the same problem, I have a whole set of torx screwdrivers and my smallest one is still too big
@samghoul3699
2 жыл бұрын
Can i put xbox one thumbsticks on a series x/s controller?
@Sharky882
6 ай бұрын
Will this fix controller drift or would I need to do something else instead of replacing the thumb stick?
@SantiagoSantiago
6 ай бұрын
This won't fix drift, for that you would need to replace the stick entirely by soldering another one kzitem.infoqG4VgGrtc1A
@Sharky882
6 ай бұрын
@@SantiagoSantiago thank you
@noahgleason9915
6 ай бұрын
*people complaining about needing the right screw head* 😡 *me who stripped the middle prong on purpose so i can use a small flathead* 😎😏
@user-br6yk2ls7b
6 ай бұрын
Anyone know what size of screwdriver you need?
@1nOnlyJesus
7 ай бұрын
Why does the screws on my controller have a little piece sticking out in the middle?
@VeX_89
2 жыл бұрын
What I was trying to find out is if they just pull off or do you have to do anything special bc I know you have to put them on a certain way, the X on the back of mine have a little c shape on ONE side so that means they can only go on one way
@ChrisS-nq1ke
7 ай бұрын
It's a bit of a hassle but it beats having to put down 60-70 dollars on a new controller
@ryancampbell4119
9 ай бұрын
I honestly thought it would have been harder to remove though I wish they would have just used screws instead of those plastic clip.
@Lukes.d1
Жыл бұрын
Can you do this with the d pad I'm going to do my first custom remote for Lil bro
@MattLloydTube
Жыл бұрын
The thumbstick I want to replace is getting stuck to the right-side when pushed that way, so will this new thumbstick solve that issue too, or do I also need to do something extra? Thank you
@nonsenselover
Жыл бұрын
Hi. Thanks for the video. I replaced the thumb sticks but now the controller won't switch on. Any thoughts please..?
@nonsenselover
Жыл бұрын
Update - will switch on when plugged in, but not using batteries!
@darepz
2 жыл бұрын
If I but replacement analog sticks for xbox one will they still work for series x controller
@AydRoblox
11 ай бұрын
I can’t get the plastic covers off the back of the controller because it feels like it’s gonna break
@xbeastin3052
11 ай бұрын
Will this fix stick drift?? Thanks
@SantiagoSantiago
11 ай бұрын
It won't fix stick drift, only wear and tear of thumbsticks
@muhammadnurqalby3156
3 жыл бұрын
1 dislike from someone who actually broke his controller. 😄
@FuryousD
2 жыл бұрын
So its allot easier than switch joycons then, thank God, those are a pain in the ass to replace especially the sticks on a switch lite.
@nashhash2380
Жыл бұрын
This is the only thing I hate on Xbox controller and this are the thumbsticks.
@socalrcguy1
11 ай бұрын
I want round dome thumbstick
@NickyDoors
Ай бұрын
How do I not destroy if I don't want to destroy it And change it
@saravana6144
3 жыл бұрын
Will this stop my controller drift
@SantiagoSantiago
3 жыл бұрын
It won't
@jagadeesan5656
3 жыл бұрын
@@SantiagoSantiago how to stop it
@andres_forero2882
3 жыл бұрын
@@jagadeesan5656 you have to replace the entire joystick, sometimes just unweld and weld again works
@KnightWing274
11 ай бұрын
Can you use a xbox one joystick on a xbox series x/s controller?
@SantiagoSantiago
11 ай бұрын
Thumbsticks should be fine
@Sovereign_54
Жыл бұрын
So this just replaced the rubber. It won’t fix my stick drift. 😔
@vikfan3557
15 күн бұрын
My broplem, the stick himself is broken
@jomoooo
Жыл бұрын
do i gotta remove the back of the controller just for the thumb sticks or is that not necessary ?
@wickedflea
Жыл бұрын
Yeah, you do.
@ArmaniPlayz1029
Жыл бұрын
Mine custom ones dont have the half dome?
@glee_ock
9 ай бұрын
what is the measurement of the screw? I tried a lot but don’t know the measurement. 😂
@ItsSahendra
3 жыл бұрын
⚠️ NO CONTROLLERS WERE HARMED IN THE MAKING OF THIS VIDEO ⚠️
@calebsam5104
Жыл бұрын
thx
@Kurumi-Tokisaki.
Жыл бұрын
How Do I put on the analog sticks
@bosskey23
2 жыл бұрын
Does this fix stick drift? Or will i have to remove the piece underneath?
@SantiagoSantiago
2 жыл бұрын
It won't fix stick drift, that's related to the component soldered into the board
@williamsway8085
Жыл бұрын
Nice
@meltingpoint97
Жыл бұрын
Anyone help me out here - the thumb sticks are not going on - lot of Resistance when placing them
@garrettstraffon608
7 ай бұрын
That screw bit is not easy to find!
@0ni0nKn1ght
Жыл бұрын
i was raging while playing rocket league and i hit the controller so hard the right analog stick came off so im gonna try and fix it
@dasinmason5489
2 жыл бұрын
So mad cuz my ads in a game is like sometimes working sometimes not, so mad I pulled the analog stick out cuz I punched the controller and it started to cuz drift (Currently looking for a star screwdriver or whatever an this just got me more annoyed
@sasidharanv8842
Жыл бұрын
Hard to remove the screws. TR8 screw driver 😢😢😢
@KodyTheOhioan
11 ай бұрын
The dumbest idea to make random screwdriver that no one owns the one you need for this. Guess I bought the new joysticks and everything just to not even be able to open the controller up lmao L tr8 screws
@Mrjonnyjonjon123
2 жыл бұрын
I really hate when they hide the screws on the back, was almost about to break my controller
@shantonabsen2299
3 жыл бұрын
Cool btw death loop system requirements revealed today, minimum gtx 1060 6gb is required 😂, game is launching in 4 days, excited to see your benchmark of that game 😁
@NotTobias.
10 ай бұрын
Just a quick one where can you find those screwdriver at and what’s it called ???
@SantiagoSantiago
10 ай бұрын
It's included with the thumbstick replacements in the link in the description
@alyuneko1288
3 жыл бұрын
this will fix drift yes?
@SantiagoSantiago
3 жыл бұрын
It won't
@theoldpcgamer77
3 жыл бұрын
Not the sticks i have a problem with on my xbox one s controller on pc. It's the fact when i'm playing via wired albeit on a usb extension lead that i'll get random controller disconnected during gameplay. Not sure if it's the cable, extension lead or joypad connection worn out. Tried swapping usb port on the motherboard with no luck. Really getting on my nerves for games that use joypad controls.
@SantiagoSantiago
3 жыл бұрын
Maybe a different cable?
@mindrover777
3 жыл бұрын
Yes try with a different or new cable. Happens cause the old xbox pads use micro USB port. They tend to loosen up after extented usage.
@MarksterC
2 жыл бұрын
you shouldve swapped the cable before you swapped the actual usb port lol in my experience its always been the cable unless your port is seriously broke
@TrillM23
Жыл бұрын
Bro I took my sticks out my P5 controller and I can’t put them back in
@SantiagoSantiago
Жыл бұрын
kzitem.info/news/bejne/pYRuuo6sm2dlfXY
@Fullmetal1222
Жыл бұрын
Too bad this doesn’t work on special edition controllers my gears 5 controller thumsticks are showing signs of the rubber falling apart
@adithyaar9122
3 жыл бұрын
How much a pair of thumb sticks cost ?
@SantiagoSantiago
3 жыл бұрын
Depends on your region, they are dirt cheap even in South America
@abc_8773
4 ай бұрын
Dude thats not some force lmao i cant pull mine😂
@VeX_89
2 жыл бұрын
Can’t you just remove the top on a series x controller and pull them off? Don’t need to mess with the back
@PietroSanta
2 жыл бұрын
How would you unscrew it then?
@DracoSafarius
2 жыл бұрын
Sadly no, it's screwed in. Just pulling it off would rip the attach points of the screws and likely damage a fair bit
@quintenfindlay-barr7829
Жыл бұрын
Does this possibly make it drift?
@SantiagoSantiago
Жыл бұрын
Not related to drift, that's on the potentiometers side
Пікірлер: 176