Just finished the front propeller shaft! With a little help from my friends! Thanks!
@stevemcilroy9518
5 жыл бұрын
Another good vid, I would have left the silver clamp on the coupling if I had not watched this. Thanks
@access013Pro
Жыл бұрын
При помощи молотка и зубила починил весь авто! Добро пожаловать в мир АВТОВАЗа)
@iberiksoderblom
5 жыл бұрын
I need (neeeeeed...) to get a Niva again !!! Good video.
@progip2580
5 жыл бұрын
You are really great! Greetings from czech!!
@LadaPower
5 жыл бұрын
Robert Janda Thanks!
@user-gr7ru3bi1e
4 жыл бұрын
Очень позитивно и познавательно.
@mohamedoqdah2266
3 жыл бұрын
Good job. Many thanks for your efforts
@opuntialophora6773
5 жыл бұрын
Thanks for the lesson !
@raybob49
3 жыл бұрын
Nice work Guys!
@LadaPower
3 жыл бұрын
Thanks, mate!
@juansebastiangarciaguerrer6485
2 жыл бұрын
Exelente trabajo asi uno aprende
@guillermohervas8904
5 жыл бұрын
Buen video felicitaciones desde Ecuador
@georgevalgood1718
9 ай бұрын
Excelent
@andremendozacarbajal6250
8 ай бұрын
It looks so easy to do this, I'm afraid to change those little parts. help me.
@bozajanos3411
2 жыл бұрын
And you put the 50-year-old self-locking hexagonal nut back. :( Never mind, good job. Greetings from Hungary.
@DenisSinyukov
5 жыл бұрын
Отличное видео.
@dechdechdech
2 жыл бұрын
i dont understand something, really nice editing, good filming, rythm, nice explications so ... the guy is in a professional shop but he work on the floor and use screwdrivers like pin pinch and wrench like a hammer. WTF pay him tools please ahahah thank you for sharing knowledge but buy him more tools please
@rodrigosanchez4169
5 жыл бұрын
Mill gracias
@juancarlosbrito771
3 жыл бұрын
Buena clase
@xtrememid1705
Жыл бұрын
Can you somehow put rubber donut wrong? And how to know when is wrong? Mine is new put on Niva i removed silver clamp and still hitting like old one?
@konstantinosvas7130
5 жыл бұрын
Without special tools .It's time to make better my twenty seven years old niva.
@MrBanaanipommi
11 ай бұрын
hey ladapower guys, i am wondering if the old donut can cause the propeller shaft shaking or so, it started long time ago but its been getting worse every year. i have just replaced the support bearing and joints but now it runs even worse, i tried to mark the propeller shaft also so it would go back together in right position...
@LadaPower
11 ай бұрын
Yes. Donut can be a source of the vibration.
@MrBanaanipommi
11 ай бұрын
@@LadaPower thanks, we made a small mistake when replacing joints and one of the cups cracked.. it still works like it should which is weird, so we will replace it again.and replace the dpnut :)
@MrBanaanipommi
11 ай бұрын
@@LadaPower by the way, is there more of classic lada repair instruction videos coming? if it is possible i would suggest to do gearbox rear end bearing replace, the place where the donut is attached to gearbox :) i see mine is loose and dont know how long it still lasts, need to get rid of that vibration at least hehe... it already has lasted 8 years of daily drive tho!
@LadaPower
11 ай бұрын
Thank you for the idea. We will start tp produce new videos asap@@MrBanaanipommi
@MrBanaanipommi
11 ай бұрын
@@LadaPower always love watching these videos :)
@skinnie88
4 жыл бұрын
Can you explain why and when should we buy/use the Donut Reinforced? Will it last more but have more vibration?
@LadaPower
4 жыл бұрын
All the latest Niva have a reinforced donut. It is much stronger.
@loshermanossanabria
5 жыл бұрын
como cambiar los frenos delanteros de lada 2104
@coucounot7606
2 жыл бұрын
My lada niva gearbox broke so we had to fix it. It had a missing chunk in the corner, so we when to a welder and he done it good. The next thing we did was we put the gearbox back on the engine and we unbolted the middle diferential and removed the rubber donut to see if it was good. After we are done we drove it home without having the middle diferential calibrated. After a ride it started screaming when we let go of the clutch for a second. We recently bought the big yellow mount. We mount it we calibrate the differential as best as we can and it still screams when we let go of the cluch for a second or 2. Can you guys help us please?
@bas9858
5 жыл бұрын
How do you actually know, this is needed to be replaced?
@suprememarcus
4 жыл бұрын
You will know when your car starts to vibrate when driving. If the HI-LO and gear box lever are vibrating when you drive, its a good time to have a look at the rubber doughnut and check for any cracks along it.
Пікірлер: 37