Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ic/1AEWP00228
This video shows you how to install a water pump on your 2007-2010 Chrysler Sebring (2.4 L). The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2007 Chrysler Sebring
2008 Chrysler Sebring
2009 Chrysler Sebring
2010 Chrysler Sebring
Tools you will need:
• Pry Bar 1aau.to/ofs/1AXAA00020
• 10mm Wrench 1aau.to/oft/1AXAA00010
• 10mm Socket 1aau.to/oqf/1AXAA00017
• 12mm Socket 1aau.to/otd/1AXAA00015
• 13mm Socket 1aau.to/otd/1AXAA00015
• 15mm Socket 1aau.to/otd/1AXAA00015
• 16mm Socket 1aau.to/otd/1AXAA00015
• 19mm Socket 1aau.to/oiz/1AXAA00043
• 7mm Socket 1aau.to/oqf/1AXAA00017
• 1/2 Inch Air Impact Gun 1aau.to/obv/1AXAA00252
• Ratchet 1aau.to/ouM/1AXAA00016
• Torque Wrench 1aau.to/omJ/1AXAA00044
• Drain Pan 1aau.to/ocn/1AXAA00320
• Rubber Mallet 1aau.to/oah/1AXAA00413
Subscribe: / @trq
Check out our playlist:
Chrysler Sebring 2007-2010 3rd Generation: • Chrysler Sebring 2007-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Негізгі бет Автокөліктер мен көлік құралдары How to Replace Water Pump 2007-2010 Chrysler Sebring (2.4L)
Пікірлер: 10