Which type of Grease is best for wheel bearing applications 1 Lithium red EP grease nlgi 3 2.methyl lithium red gel grease nlgi 2.5 These are some options which I have in my area
@jjjjjjjjrifufjssjosskenf
Жыл бұрын
Another tip, put your new bearings in the freezer for a few hours before installing
@ranvirsinghnetam8584
11 ай бұрын
Which type of Grease is best for wheel bearing applications 1 Lithium red EP grease nlgi 3 2.methyl lithium red gel grease nlgi 2.5 These are some options which I have in my area
@Kawasakimoon88
4 ай бұрын
Probably doesn't make much of a difference bearings should be sealed bearings..
@shogun678
6 ай бұрын
Jeez I’ve never had a bearing job go sooo smooth. You guys make it look super easy. Usually everything is crazy seized lol. I guess I should change ‘em out sooner eh lol.
@georgeellison926
Жыл бұрын
One click on that torque wrench, not two. As an industrial salesman for Snap-on for years, we did torque demos using calibration devices and found that many guys over-torqued. Anticipate the click, when it comes stop immediately.
@philiplang9921
Жыл бұрын
Good that you included showing the plastic spacer on the rear wheel. So may videos just skip this step. Now I don't have to make a video explaining this!
@tomkelly7874
3 ай бұрын
Very helpful video. Thanks! Bought the bearings from you guys because of the video.
@jesseryder703
Жыл бұрын
Just like to thanks 🤙🏽guys…. This was a helpful guide for me when it came to changing my bearings on my 2020 KTM350sxf …keep up the awesome 💪🏾work …Chur Chur
@chain.driven
2 ай бұрын
Just did this yesterday. Never saw a spacer washer on my bike - makes me wonder if it never had one or went missing. Time to check the parts fiche - 2012 KTM 500!
@rmatvmc
2 ай бұрын
Check out the schematic: www.rockymountainatvmc.com/oem-schematic/16?FirstChoice=KTM&SecondChoice=1346&ThirdChoice=1398&assemblySchematic=46762
@chain.driven
2 ай бұрын
@@rmatvmc Thanks. Looks like the 2012 500's never had them.
@brendanmcgagin9381
7 ай бұрын
Your videos are always so helpful.
@perrygibbons1816
Жыл бұрын
I always add more grease to the new bearing because there is very little in them and they will wear out very fast, my bearings last me about 🤔 hmm years.
@ranvirsinghnetam8584
11 ай бұрын
Which type of Grease is best for wheel bearing applications 1 Lithium red EP grease nlgi 3 2.methyl lithium red gel grease nlgi 2.5 These are some options which I have in my area
@rassy7
Жыл бұрын
You know what the rear axle nut socket size is for the 2023s? It's smaller than 32mm.
@rmatvmc
Жыл бұрын
It should be a 30mm.
@chain.driven
2 ай бұрын
Controversial topic warning ⚠️ Do you put extra grease in already greased bearings? I’ve been chalking them full of marine grease with pretty good results. My latest set of NTN looked well greased from the factory so I’m gonna try leaving them stock this time.
@rmatvmc
2 ай бұрын
It's honestly not a bad idea, some bearings from the factory don't come properly greased. Always a good idea to periodically check all of your bearings and add grease if you feel like there's not enough
@666dynomax
4 ай бұрын
so theres enough room even with the spacer inside the hub to put the collet in is there? I need to get a kit of these blind pullers.
@rmatvmc
4 ай бұрын
Yep, the Tusk bearing remover is perfect for wheel bearings!
@Nacastle81
Жыл бұрын
Link to the bearing puller and seal puller? Thanks!
@rmatvmc
Жыл бұрын
The first link in the description will take you to a page with all the parts and tools used in this video. www.rockymountainatvmc.com/Sales/3666/KTM-Husqvarna-Wheel-Bearing-Replacement
@T3G.racing
9 ай бұрын
How do you put grease in the bearing?
@rmatvmc
9 ай бұрын
The bearings we used for this bike were sealed and didn't need greased. If you have different bearings or you just want to pop the dust cover off and grease them more, you can pack them with grease. We have an older video showing how to pack steering stem bearings and the concept will be the same for wheel bearings. You can check that out here: kzitem.info/news/bejne/pp2dzXqAholhf6Q
@johnvanzyl6146
9 ай бұрын
What was the size of the bearing driver front and rear 🙏
@jesesleevenstein4597
Жыл бұрын
Why does heating help? Would think it would expand and get tighter.
@rmatvmc
Жыл бұрын
Heating does cause expansion and that's why it helps. Heating the metal around the bearing causes it to expand which makes the bearing come out easier. If you heated the bearing itself that would make it become tighter.
@andrewsoldan6050
11 ай бұрын
alu expands more hen steel
@lucabachini40husqvarnaraci96
Ай бұрын
top 🙂
@jasonmayberry5873
Жыл бұрын
you actually invite heating up the hub doesn't that ruined the process it's already been done with hardening of it and you know what that's crazy I mean that would soften it making it you know more prone to fail? I mean I wanted to heat it but I stopped myself cuz I didn't change the tempering that was done
@JesseOtt111
Жыл бұрын
Tempering takes hours. The heat from that gun, for only a few seconds-maybe minutes-is not nearly enough to change the tempering of the metal. It does however create minor molecular expansion at tolerances sufficient to reduce the force necessary to remove the bearing.
@ranvirsinghnetam8584
11 ай бұрын
Which type of Grease is best for wheel bearing applications 1 Lithium red EP grease nlgi 3 2.methyl lithium red gel grease nlgi 2.5 These are some options which I have in my area
Пікірлер: 34