Europe based Patrol owners watch out! We have a different color coding system. If you don't want to use the original green Nissan coolant you'll have to go for the BASF/VW color coding. As you want silicate free coolant for your Patrol, the coolant to choose is the pink one [G12+ (VW), G30 (BASF)].
@Alex.G
2 жыл бұрын
Good comment this one! I'll pin this for others to see 🙂
@OdinsonOverland
Жыл бұрын
Very helpful video mate! Love that you actually got someone qualified to also assist with the video, helps reassure those watching that its the correct process. 🍻🍻
@aleks0001
Жыл бұрын
I learn't more from this women than the 50 other blokes I've watched on youtube. Amazing what a qualification does :D Thanks guys, very useful video.
@johnxander6305
3 жыл бұрын
Every Australian generally knows how to cut a bit of garden hose off
@handymandev03
3 жыл бұрын
Top job. And I think most Aussies are good at chopping up the garden hose 🤣
@thevisualmemories5850
3 жыл бұрын
You are doing great job. There is everything on youtube. But nothing about patrol. You guys are amazing. Hats off legend ❤️❤️
@stevecrop6264
3 жыл бұрын
Love the no BS format!
@keilfestin4606
3 жыл бұрын
Awesome video mate I’m still learning my patrol my first GU very helpful hopefully more car maintenance like this
@JamesMandy
3 жыл бұрын
This vid has the best thumbnail on KZitem so far in 2020.... 😎
@dantheman5222
3 жыл бұрын
a really important note here is to check your handbook for the correct coolant to water ratio,in some engine, even a slight increase to book ratio will eat Aluminium and on large diesel engines will eat wet liners. you can use tap water if you have no other option is fill a 20 lt bucket let it sit for 24hrs so the chlorin boils off. good video guys
@Alex.G
3 жыл бұрын
Thanks Dan that's a bloody good idea to mention 👌
@dantheman5222
3 жыл бұрын
@@Alex.G no problem at all, 25+years as Diesel mechanic glad I can help. love ya channel keep it up
@michaelnorwood3037
3 жыл бұрын
A very good video on how to flush and replace engine coolant, I should have watched it before I did the job. I’m glad to see that I am not alone in stuffing the head on the 12mm engine coolant drain plug (inaccessible little bugger that it is) currently awaiting a new drain plug from Nissan. I did the job without removing this drain plug. I flushed the system through with soft tap water several times draining through the radiator. Then flushed through with demineralised water twice before adding the coolant and topping up. I took off for a short drive in between each flush to warm the system up. This makes it a bit more time consuming than draining the block of coolant via the drain plug but there you go. A less considerate person might think Nissan make the engine coolant drain plug from especially soft metal to confound the home mechanic but I’m not like that!🤔🤣
@Alex.G
3 жыл бұрын
Yeah what a pain in the arse having to work around that stupid bung hey 🙄 it's like it's made of plastic!
@michaelnorwood3037
3 жыл бұрын
@@Alex.G These little buggers have to be ordered from Japan and cost around $25. You would think something so basic would be stocked in Oz considering the large number of 3 litre Diesel engine out there. I managed to get it out during the 120,000 service but stuffed it this time around. Careless bugger!🤪
@MrDigger450
3 жыл бұрын
Great video wish u put in on 2weeks ago as I never new coolant was still stuck in block, oh well next time will drain block cheers guys 🍺
@timlaw219
3 жыл бұрын
I couldn't get the block drain plug of mine when I did it
@thebossman80s
2 жыл бұрын
Yet another video I needed to see, thanks for this one
@pradeeprajasekaran
2 жыл бұрын
I didn't go through the whole comments if it's commented before, but the coolant does RAISE the boiling point temperature and LOWER the freezing point temperature.
@plung3r
5 ай бұрын
Excellent video. But I'm having a hard time finding the engine block drain plug on my tb48de engine.
@njpw1402
3 жыл бұрын
Haha I stuck around to watch the very end awesome 🤣
@4x4CampingandAdventures
3 жыл бұрын
Awesome vid Alex I normally run a radiator flush when I have a big session on the beers and need to unclog the next morning.
@Alex.G
3 жыл бұрын
No ya don't, we all know you prefer to get a coupla blokes up ya when things are a bit clogged up 😁
@4x4CampingandAdventures
3 жыл бұрын
@@Alex.G blokes on blokes is the only way
@benanza9
2 жыл бұрын
Thanks. Great video
@timwoodward8113
2 жыл бұрын
Keep your heater on full ball while filling up and driving around
@bigfella6629
3 жыл бұрын
I was always taught to park the vehicle on a very slight incline so as the front is slightly higher than the rear of the vehicle so as you r filling the coolant and bleeding the system air can escape a little easier..
@muhammadadil9812
3 жыл бұрын
Can you make a video on how to change blinker fluid?
@stevenpayne7022
3 жыл бұрын
Great vid
@denc6505
3 жыл бұрын
😂😂 love the life mannequins in the back there They are good. Keep up the good vids. I was going to say at what time they were at but I'll let others watch and see.
@whitedogproductions6153
3 жыл бұрын
Good stuff guys.....cheers...
@keithy363
5 ай бұрын
If my temp gauge goes up but botttom hose stays relatively cool I’d say my thermos is fooked
@SC2Spectre
3 жыл бұрын
great stuff
@BADQ
3 жыл бұрын
Don't forget eye protection either, that stuff is lethal getting it splashing into your eyes!
@DBorgie69
3 жыл бұрын
The block drain plug is tight but easy to get off its not that soft, you just needed to tap your socket onto it so it went all the way on. It has a good amount of head on it to grab. I tried to insert a photo but don't seem to be able to
@Ian-le3bu
Жыл бұрын
Just wondering if using an air compressor to try and get as much of the tap water out? just a thought
@paulmcgaw6976
3 жыл бұрын
Great vid! Wouldn't dripping the lower radiator hose release the water from the block?
@Alex.G
3 жыл бұрын
On this engine the thermostat is on the bottom hose, so unless I dropped the hose with 82 degree water in there, the thermostat would block any flow 🙁
@paulmcgaw6976
3 жыл бұрын
@@Alex.G ah OK I see! So for example, when I drop the bottom hose off my falcon, it would empty the block because my thermostat is up top? Maybe that why my falcon and old Land Cruiser never had a drain plug in the block, because the thermostat is up top so dropping the lower hose releases the water from the block
@quentinsherratt7969
3 жыл бұрын
Hey Alex do u have a video for waterpump replacement?
@Alex.G
3 жыл бұрын
Nah I've never had to do one
@anupathennakoon714
3 жыл бұрын
good one guys❤️👌🏿
@jacintareynolds5607
2 жыл бұрын
How to pull out the blower motor out of a gu 1998 nissan patrol
@roocrew86
3 жыл бұрын
You better be hitting that
@CV-qs2nx
3 жыл бұрын
Hehe 12" hose Nice 😏
@CitizenNumberOne
3 жыл бұрын
I was under the impression that blue Nissan coolant is what it comes with the car out of the factory?
@Alex.G
3 жыл бұрын
I didn't actually know Nissan did a blue coolant. It's definitely green for most GUs, I would expect it's the same for all GUs but it very well could have changed in later models
@magnushartz99
3 жыл бұрын
Nice video. Just did the same process a couple of weeks ago. However, I thought you where supposed to fill up coolant in the expansion tank with the yellow lid and markings for high and low on the tank, and not the one with a pressure cap?
@sorin.n
3 жыл бұрын
I found the drain plug! Oh she is tight! 😁
@timlaw219
3 жыл бұрын
I couldn't get mine so tight
@LINEXAustralia
3 жыл бұрын
I feel 5:40 was for my benefit?
@OOHYEH
3 жыл бұрын
👍👍👍
@peterb3473
3 жыл бұрын
Is riannan for hire, mechanical repairs on the side too.
@nooki1102
2 жыл бұрын
Ah dammit I was hoping it would be a td42t. Only a zd30 so non applicable.
Пікірлер: 59